Custom NAT and DHCP Configuration on a Windows Host
来源:互联网 发布:mysql数据库下载64位 编辑:程序博客网 时间:2024/06/07 04:06
If you are an advanced user on a Windows host computer, you can make custom configuration settings by editing the NAT and DHCP configuration files. If your host operating system is installed on the C drive, the configuration files for NAT and DHCP are in the following locations:
•
NAT: C:/Documents and Settings/All Users/Application Data/VMware/vmnetnat.conf
•
DHCP: C:/Documents and Settings/All Users/Application Data/VMware/vmnetdhcp.conf
Note
You can change many key NAT and DCHP settings using the Virtual Network Editor (Host > Virtual Network Settings). However, if you have made manual changes to the configuration files, some or all of those changes might be lost when you use the Virtual Network Editor. If you have made manual changes, you should make backup copies of the files before changing any settings in the Virtual Network Editor. After making changes in the Virtual Network Editor, you can copy your manual changes back into the appropriate configuration files.
- Custom NAT and DHCP Configuration on a Windows Host
- Dynamic Host Configuration Protocol (DHCP) and Bootstrap Protocol (BOOTP) Parameters
- DHCP(Dynamic Host Configuration Protocal)
- DHCP, Dynamic Host Configuration Protocol
- DHCP Relay Configuration on SonicOS
- OPC AND DCOM CONFIGURATION ON WINDOWS 2008 AND WINDOWS 7
- dhcp(Dynamic Host Configuration Protocol)
- DHCP(Dynamic Host Configuration Protocol)
- How to send and handle a custom Windows message
- Send Custom Event to Host (Windows Form) from a WPF Control -Part 2
- DHCP:动态主机配置协议(Dynamic Host Configuration Protocol)
- DHCP 动态主机配置协议(Dynamic Host Configuration Protocol)
- DHCP:动态主机配置协议(Dynamic Host Configuration Protocol)
- DHCP:动态主机配置协议(Dynamic Host Configuration Protocol)
- DHCP 是 Dynamic Host Configuration Protocol(动态主机分配协议)
- VM网络四个选项bridge、NAT、host-only、custom
- EVM DM355 BOARD AND HOST WORKSTATION CONFIGURATION
- A study on IPC options on WinCE and Windows
- u-boot-2010.03在tq6410上的移植详解(八)
- JS屏蔽Cognos报表右键菜单
- 利用JS重写Cognos右键菜单
- 近况
- uboot 与 Linux 内核移植
- Custom NAT and DHCP Configuration on a Windows Host
- Windows7 VMware USB Arbitration Service启动失败解决
- VCM V8 content management tips
- shell编程日记---02
- 预编译命令总结
- gc和operator new:不得不说的事
- DirectX 小游戏
- 感谢赵杰(jackhope)umi v4加密狗驱动对我很有用
- Debugging tools