GSM规范 相关
来源:互联网 发布:99宿舍客服系统 mac 编辑:程序博客网 时间:2024/05/16 07:23
http://www.3gpp.org/ftp/Specs/archive/
Gsm03.38 规范: Alphabets and language-specific information 着重介绍短信发送中对字符集的控制部分
Gsm03.40 规范: Technical realization of the Short Message Service (SMS) Point-to-Point (PP) 详细介绍各种不同短信的不同实现
Gsm07.05 规范: Use of Data Terminal Equipment - Data Circuit terminating;Equipment (DTE - DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS) ,介绍 at 的一些控制命令。
Gsm07.07 规范:着重介绍 at 的短信相关命令,可以说是 at 的 sms 规范。
All 3G and GSM specifications have a 3GPP specification number consisting of 4 or 5 digits. (e.g. 09.02 or 29.002). The first two digits define the series as listed in the table below. They are followed by 2 further digits for the 01 to 13 series or 3 further digits for the 21 to 55 series. The term "3G" means a 3GPP system using a UTRAN radio access network; the term "GSM" means a 3GPP system using a GERAN radio access network. (Thus "GSM" includes GPRS and EDGE features.)The full title, specification number and latest version number for every specification can be found in the current status list [warning: large file!] (see also main specs page for status lists pertaining to each TSG SA meeting) and more information about terms such as R99 and Rel-4 can be found on the Releases and phases page.A specification in the 21 to 35 series may apply either to 3G only or to GSM and 3G. A clue lies in the third digit, where a "0" indicates that it applies to both systems
Subject of specification series
3G/GSM R99 and later
GSM only (Rel-4 and later)
GSM only (before Rel-4)
General information (long defunct) 00 seriesRequirements21 series41 series01 seriesService aspects ("stage 1")22 series42 series02 seriesTechnical realization ("stage 2")23 series43 series03 seriesSignalling protocols ("stage 3") - user equipment to network24 series44 series04 seriesRadio aspects25 series45 series05 seriesCODECs26 series46 series06 seriesData27 series47 series (none exists)07 seriesSignalling protocols ("stage 3") -(RSS-CN)28 series48 series08 seriesSignalling protocols ("stage 3") - intra-fixed-network29 series49 series09 seriesProgramme management30 series50 series10 seriesSubscriber Identity Module (SIM / USIM), IC Cards. Test specs.31 series51 series11 seriesOAM&P and Charging32 series52 series12 seriesAccess requirements and test specifications 13 series (1)13 series (1)Security aspects33 series(2)(2)UE and (U)SIM test specifications34 series(2)11 seriesSecurity algorithms (3)35 series55 series(4)Evolved UTRA aspects36 series--
Note (1): The 13 series GSM specifications relate to European-Union-specific regulatory standards. On the closure of ETSI TC SMG, responsibility for these specifications was transferred to ETSI TC MSG, (Mobile Specification Group) and they do not appear on the 3GPP file server.
Note (2): The specifications of these aspects are spread throughout several series.
Note (3): Algorithms may be subject to export licensing conditions. See the relevant 3GPP page. See also the relevant ETSI pages.
Note (4): The original GSM algorithms are not published and are controlled by the GSM Association.
The 3GPP Specifications are stored on the file server as zipped MS-Word files. The filenames have the following structure:
SM[-P[-Q]]-V.zip
where the character fields have the following significance ...
S = series number - 2 characters (see the table above)
M = mantissa (the part of the spec number after the series number) - 2 or 3 characters (see above)
P = optional part number - 1 or 2 digits if present
Q = optional sub-part number - 1 or 2 digits if present
V = version number, without separating dots - 3 digits
So for example:
21900-320.zip is 3GPP TR 21.900 version 3.2.0
0408-6g0.zip is 3GPP TS 04.08 version 6.16.0
32111-4-410 is 3GPP TS 32.111 part 4 version 4.1.0
29998-04-1-100 is 3GPP TS 29.998 part 4 sub-part 1 version 1.0.0
- GSM规范 相关
- gsm的相关规范下载
- GSM规范列表
- GSM 相关术语解释
- 相关的GSM AT指令
- GSM 短信相关AT指令
- GSM 短信相关AT指令
- 【大话GSM】BER测量相关
- GSM 短信相关AT指令
- GSM规范中的部分编码转换
- GSM规范中的部分编码转换
- GSM规范中的部分编码转换
- GSM模块SMS相关AT命令使用说明
- GSM模块SMS相关AT命令使用说明
- GSM模块SMS相关AT命令使用说明
- GSM模块SMS相关AT命令使用说明
- GSM模块SMS相关AT命令使用说明
- GSM模块SMS相关AT命令使用说明
- 1042 Gone Fishing(枚举+贪心)
- 善用subview代替直接在view上绘制
- Android sensor 实用篇
- sql小技巧+antlr关键字问题
- ant将多个jar打包为一个jar
- GSM规范 相关
- mysql优化文章
- java快速计算文本文件行数
- 一致性算法研究
- fninit fstsw指令
- The factory pattern
- 列式数据库存储
- Bug调试过程
- Linux平台代码覆盖率测试工具GCOV相关文件分析