Mac OS X 系统下的安装httpd
来源:互联网 发布:淘宝旗帜店 编辑:程序博客网 时间:2024/06/02 13:12
Mac OS X 系统下的安装
Dan Black
08-Mar-2007 06:00
08-Mar-2007 06:00
My httpd.conf had some of the lines, but not all of them -- mine was missing the LoadModule and AddModule lines for php. I'm not sure why -- I don't delete any of those; I just comment them out if I'm not using them. Plus, the note above put a space in "LoadModule"; it has no space. I didn't know about the "apachectl graceful" trick, though -- since "httpd -k restart" stopped working (probably around 10.2), I had just been doing it manually -- find the process, kill it, and hit httpd again -- thanks for the tip!
So for those who are missing any of the lines, here are the full lines.
In the section with all the other LoadModules:
LoadModule php4_module libexec/httpd/libphp4.so</div>
Directly below that section should be the AddModules; you need:
AddModule mod_php4.c
And then the AddType lines should be right after the language priorities (so after the AddCharset lines and after the LanguagePriority bit):
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
Then restart apache/httpd as described above, and hopefully you should be good.
BTW, the actual module should be at:
/usr/libexec/httpd/libphp4.so
So if things fail, you can check to see if that's there.
Thanks to others who posted here; it definitely helped and got me on the right track. I just had to find the module manually to write my own LoadModule line.
Jeff Hayden
10-Sep-2006 08:17
10-Sep-2006 08:17
Just a note. The darwinports software is now macports and you can get it at: http://www.macports.org/
If you use macports, be sure to change any refernces you may have in your calling scripts to macports as the file macports now gets installed.
andreas at fink dot org
18-Aug-2004 09:01
18-Aug-2004 09:01
To build on MacOS X 10.3.5 set the environment variable CFLAGS in the following way (depending on your shell)
setenv CFLAGS "-DBIND_8_COMPAT=1 -DEAPI -O3"
export CFLAGS="-DBIND_8_COMPAT=1 -DEAPI -O3"
Then launch configure with the options:
./configure --prefix=/usr --mandir=/usr/share/man ....
The -DBIND_8_COMPAT=1 gets you over a problem in the DNS files because MacOS X has definitions for Bind9 and PHP expects Bind8 definitions. -DEAPI is needed if you build it for Apache 1.3.31. -O3 enables the gcc optimizer.
You can also add one of the following lines to your CFLAGS depending on the CPU you use to further improve speed:
-mcpu=G3 -mtune=G3
-mcpu=G4 -mtune=G4
-mcpu=G5 -mtune=G5
Rick
29-Oct-2003 04:12
29-Oct-2003 04:12
under MacOS 10.3 if your compile fails
vi Makefile
find the dns.c entry
add the switch -DBIND_8_COMPAT
run make again
jack dash pinette at uiowa dot edu
24-Jan-2003 11:56
24-Jan-2003 11:56
PHP 4.3.0 can easily be build on Mac OS X client; you don't need to download a binary. The process is quite fast and painless.
See
http://www.onlamp.com/pub/a/php/2003/01/17/phpcookbook.html
for details.
php at radicalcomputingconcepts dot com
16-May-2002 01:35
16-May-2002 01:35
10.1 with fink installed into /sw ,mysql installed from fink.
finally :
Apache/1.3.24 (Darwin) DAV/1.0.3 PHP/4.2.1 mod_ssl/2.8.8 OpenSSL/0.9.6c configured
initial apache config:
./configure --prefix=/sw --enable-shared=max --enable-module=most --target=apache --with-layout=GNU
--enable-suexec --suexec-caller=www-data
then php config:
./configure --prefix=/sw --with-xml --with-apache=../apache_1.3.24 --with-curl=/sw --with-pdflib=/sw
--enable-exif --with-mysq=/sw
then mod-ssl config:
./configure --with-apache=../apache_1.3.24 --with-ssl=/sw --enable-rule=SSL_SDBM
final apache config:
./configure --prefix=/sw --enable-shared=max --enable-module=most --target=apache --with-layout=GNU
--enable-suexec --suexec-caller=www-data --activate-module=src/modules/php4/libphp4.a --enable-module=ssl
on final make of apache there was error in src/modules/ssl. i had to rm -ldbm and -lgcc and run gcc line by hand. then was able to finish make.
i dont know what effect that may have on the build and i am interested to know, this was the only problem spot finally after many hours of hacking at it.
testing so far:
phpinfo() via http and https works.
info at ericbontenbal dot nl
18-Feb-2002 07:43
18-Feb-2002 07:43
for using PHP on MacOSX, see article #106485 of the Apple knowledge base
lanhel at mac dot com
08-Nov-2001 04:14
08-Nov-2001 04:14
Getting PHP running on 10.1 is simple.
1. su to root
2. Edit /etc/httpd/httpd.conf
3. Uncomment "Load Module php4_module" line.
4. Uncomment "AddModule mod_php4.c" line.
5. Uncomment "AddType application/x-httpd-php .php" line.
6. Uncomment "AddType application/x-httpd-php-source .phps" line.
7. Find "<Directory /home/*/Sites>" block and uncomment the entire Directory directive block.
This will allow PHP to execute from ~/Sites directory.
larry(at)shafferinteractive.com
24-Sep-2001 02:40
24-Sep-2001 02:40
For the latest on Mac OS X PHP installs (as of 10.0.4 on 9.24.01) check out http://developer.apple.com/internet/macosx/php.html
This page also has some info on MySQL installs.
oster at ieee dot org
30-Jul-2001 09:17
30-Jul-2001 09:17
If you've got Mac OS X pre-installed on your Mac, you've also got php4 pre-installed. You don't need to download or compile anything. You just need to edit the /etc/httpd/httpd.conf file. Use the "sudo open -a TextEdit..." command line, above. Search for "php", and make sure you've un-commented _all_ the relevant lines: the two AddType lines above, and also the AddModule and LoadModule lines. (but not the AddType lines for php3, since you'll be using php4.) Save and restart Apache with "sudo apachectl graceful", and you are done.
- Mac OS X 系统下的安装httpd
- VirtualBox下安装Mac OS X系统
- MAC OS X系统安装.
- mac(OS X)系统下安装node, npm, express
- VMware Workstation 12下安装Mac OS X系统。
- 苹果MAC OS X系统下安装windows7双系统,boot camp不能分区的解决办法
- VMware10下Mac OS X 10.9系统VMware Tools的安装
- Mac OS X系统下的Android环境变量配置
- Mac OS X系统下的Android环境变量配置
- Mac OS X系统下的Android环境变量配置
- 苹果电脑Mac OS X系统下设置VPN的教程
- Mac OS X系统 HomeBrew的安装和简单使用
- Mac OS X系统 HomeBrew的安装和简单使用
- Mac OS X 下Apache的编译安装
- MAC OS X下安装Eclipse的SVN插件。
- Ubuntu 14.04 下的MAC OS X 主题安装
- Ubuntu 14.04 下的MAC OS X 主题安装
- Ubuntu 14.04 下的MAC OS X 主题安装
- zlib用法简单说明
- 解决visual studio有时无法设置断点的问题
- js获取鼠标点击位置(界面的位置,可以使用top和left直接定位的)
- 无类型文件Demo
- 在8位单片机中的浮点数运算---开方,乘法,除法,反正切
- Mac OS X 系统下的安装httpd
- GridView中CheckBox实现全选或反选功能的方法
- Android WakeLock相关功能搜集
- VS2005 C++ OmniORB 使用NameService方式 实现CORBA
- Func和Action委托的区别和简单使用
- CEdit控件禁止右键的粘贴,禁止右键菜单
- 身边一位SDET推荐的关于测试的书
- opencv 64位
- Android目录及其文件说明