CentOS 编译 nginx+php+mysql 安装手记
来源:互联网 发布:yum 没有可用软件包 编辑:程序博客网 时间:2024/05/01 23:22
近期需要搭建一台web测试机,系统环境要与生产环境机器中的一模一样。 先介绍一下环境: 系统:CentOS 5.2 Nginx:0.9.5 php:5.3.5 MySQL:5.1.30 花了我一天半的时间,不断报错,不断检查,不断修改,不断百度,不断谷歌,今天中午终于搞完了,特写此安装手记,以便需要的人参考。 可能有人要问,为什么不采用现在最流行的lamp环境呢,web服务不能用apache么?为什么非要用nginx呢? 这里需要说一下,Nginx 是一个轻量级的高性能 Http WebServer,以事件驱动方式编写,因此相比 Apache 而言,Nginx 更加稳定、性能更好,资源占用较低。相对于apache来说,可以承载的了更大的并发 现在有很多大型门户的web服务器已经放弃了lamp而使用lnmp 所以,本身nginx和php两个一点都不认识的,所以安装起来要比lamp麻烦的多 一、安装前准备: 准备好程序安装所需的开发包,这里就通过yum去装了,也为了省事。 yum -y install ntp vim-enhanced gcc gcc-c++gcc-g77 flex bison autoconf automake bzip2-devel / 一、Nginx的安装: 1. pcre-8.00.tar.gz tar zxvf pcre-8.00.tar.gz cd pcre-8.00.tar.gz ./configure && make && makeinstall 2. nginx-0.9.5.tar.gz ./configure --user=www --group=www --prefix=/usr/local/nginx/--with-http_stub_status_module --with-http_ssl_module--with-md5=/usr/lib --with-sha1=/usr/lib--with-openssl=/usr/lib #此次手记中,所有的安装目录我都放在/usr/local/ 各位可以自己修改 make make install 3.接下来安装GD和相关的lib包 以下是需要用的源码包,可以从网上下到。 jxvf gd-2.0.35.tar.bz2 libiconv-1.12.tar.gz 开始安装 tar jxvf gd-2.0.35.tar.bz2 make make install mhash-0.9.9.tar.gz tar -zxvf mhash-0.9.9.tar.gz cd mhash-0.9.9 ./configure --prefix=/usr && make&& make install libiconv-1.12.tar.gz tar zxvf libiconv-1.12.tar.gz cd libiconv-1.12 libmcrypt-2.5.8.tar.bz2 cd libmcrypt-2.5.8 vim /etc/ld.so.conf 添加: /usr/lib include ld.so.conf.d/*.conf /usr/lib #如果已有就不用添加。 启动nginx: /usr/local/nginx/sbin/nginx start 查看一下80端口是否启来 netstat -antpl 二、MySQL的安装: tar zxvf mysql-5.1.30.tar.gz cd mysql-5.1.30 ./configure / make useradd mysql -d /data/mysql -s/sbin/nologin #创建mysql用户 /usr/local/mysql/bin/mysql_install_db--user=mysql #安装默认数据库 cd /usr/local/mysql 以下是权限的设定: chown -R root:mysql . cp share/mysql/my-huge.cnf /etc/my.cnf #复制mysql配置文件 /usr/local/mysql/bin/mysql -u root -p #进入mysql 默认密码为空 没问题后quit退出 下面进行最关键的一部 安装php 三、php的安装: php和nginx的整合是通过php-FastCGI FastCGI 是一个可伸缩、高速的在web server和脚本语言间通迅的接口。被许多脚本语言所支持,包括 php 多数流行的web server都支持 FastCGI。 正常情况下,nginx和php直接是完全不认识的,我们就是通过php-fastcgi将二者整合。 php5.3.0之前的版本,php-FastCGI 是需要单独安装的。但是在这之后,php-FastCGI 就整合在了php的源码包中,不必再去单独安装。在这里我用的就是php5.3.5的版本,内置了php-fpm ,编译时开启,并且编译后不存在 php-cgi 文件了 下面开始安装。 php-5.3.5.tar.gz tar zxvf php-5.3.5.tar.gz cd php-5.3.5 先执行./buildconf --force 如果报错,可能是你的 autoconf不是 2.13 版本的,PHP5.3.5的bug,需要安装 autoconf为2.13不版本: 安装完成后再设置一下环境变量:export PHP_AUTOCONF="/usr/bin/autoconf-2.13" 再次运行:./buildconf --force ,出现 Forcing buildconf ,则运行成功。 接着我们再继续编译 ./configure '--prefix=/usr/local/php' '--enable-fastcgi' '--enable-fpm' '--enable-discard-path' '--enable-force-cgi-redirect--with-config-file-path=/usr/local/php/etc' '--enable-zend-multibyte' '--with-mysql=/usr/local/mysql' '--with-libxml-dir' '--with-xmlrpc' '--with-gd=/usr/local/gd2' '--with-jpeg-dir' '--with-png-dir' '--with-bz2' '--with-freetype-dir' '--with-iconv-dir' '--with-zlib-dir' '--with-curl' '--with-curlwrappers' '--with-openssl' '--with-mcrypt' '--with-mhash' '--enable-pcntl' '--enable-sockets' '--enable-sysvsem' '--enable-inline-optimization' '--enable-soap' '--enable-gd-native-ttf' '--enable-ftp' '--enable-mbstring' '--enable-exif' '--disable-debug' '--disable-ipv6' make 注意一下,我在make的时候总会报错,这个错误一直过不去, 错误提示为: 对这个错误我很苦恼,又是谷歌又是百度,愣是没有找到解决办法。 昨天就是因为这个错误,后来就懒得弄了。 今天继续分析错误原因,最终发现应该是iconv包问题 所以在make的时候带上参数 make ZEND_EXTRA_LIBS='-liconv' 完美make成功 别忘了在再make test一下 呵呵 最后 make install 安装成功。。。 安装完成之后,复制php.ini-production 到安装目录下的etc/目录下 cp php.ini-production /usr/local/php/etc/ cd /usr/local/php/etc/ # 切换到安装目录下的配置文件目录 cp php-fpm.conf.default php-fpm.conf 修改php-fpm.conf 启用如下几行,即去掉前面的分号(;) wq保存退出 最后去/etc/init.d下 看是否有php-fpm这个启动脚本 如果有, 删除了 重新写一个 如果没有 直接写一个就行 vim /etc/init.d/php-fpm 启动 php-fpm /etc/init.d/php-fpm start 如果无法执行,可能是由于权限的问题 给个777权限即可 chmod -R 777 /etc/init.d/php-fpm 完了再启动 启动过后,用netstat -antpl 看下端口 可以看到9000端口已经启动 最后 需要更改一下nginx的配置文件 vim /usr/local/nginx/conf/nginx.conf 去掉下面语句前的注释 error_log /var/log/nginx/error.default.log; #开启错误日志 fastcgi_connect_timeout 300; # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 保存退出后 重启nginx netstat -antpl 看一下nginx的pid kill -9 pid的号码 kill掉第一个以后 再 netstat -antpl 会有一个nginx-worker进程 直接kill掉 再启动nginx cd /usr/local/nginx/sbin ./nginx 再看下80端口有没有启来 到这里 整个LNMP的配置就结束了 测试一下吧 ^_^ 可以写一个php文件放在/usr/local/nginx/html 就随便写个查看php信息的文件吧 cd /usr/local/nginx/html vim phpinfo.php <?php 打开浏览器 http://主机地址/phpinfo.php 如果出来了php的信息页面 恭喜你 配置成功啦 另注: 本文为作者调通lnmp一时兴起整理出来的文章,提供给需要的朋友。 本文内容大部分为根据本人在调试中自己写的,还有一部分是从网上摘录的
ncurses-devel openssl-devel libtool*zlib-devel libxml2-devel libjpeg-devel libpng-devel libtiff-devel /
fontconfig-devel freetype-devel libXpm-develgettext-devel curl curl-devel pam-devel /
e2fsprogs-devel krb5-devel libidn libidn-devel
libmcrypt-2.5.8.tar.bz2
cd gd-2.0.35
./configure --prefix=/usr/local/gd2
./configure --prefix=/usr && make&& make install
tar jxvf libmcrypt-2.5.8.tar.bz2
./configure --prefix=/usr && make&& make install
"--prefix=/usr/local/mysql" /
"--localstatedir=/data/mysql/data" /
"--with-comment=Source" /
"--with-server-suffix=-Linuxtone.Org" /
"--with-mysqld-user=mysql" /
"--without-debug" /
"--with-big-tables" /
"--with-charset=utf8" /
"--with-collation=utf8_chinese_ci" /
"--with-extra-charsets=all" /
"--with-pthread" /
"--enable-static" /
"--enable-thread-safe-client" /
"--with-client-ldflags=-all-static" /
"--with-mysqld-ldflags=-all-static" /
"--enable-assembler" /
"--with-plugins=all" /
"--without-ndb-debug"
make install
mkdir -p /data/mysql/data
chown -R mysql /data/mysql/data
cp share/mysql/mysql.server/etc/rc.d/init.d/mysqld #复制mysql启动文件
chmod 755 /etc/rc.d/init.d/mysqld
chkconfig --add mysqld #添加mysql随系统启动
/etc/rc.d/init.d/mysqld start #启动mysql
yum install autoconf2.13
In file included from /root/php-5.2.17/sapi/cgi/fpm/fpm.c:12:
/root/php-5.2.17/sapi/cgi/fpm/fpm_env.h:20: 错误:与 ‘clearenv’ 类型冲突
/usr/include/stdlib.h:689: 错误:‘clearenv’ 的上一个声明在此
make: *** [sapi/cgi/fpm/fpm.lo] 错误 1
pid = run/php-fpm.pid
error_log = log/php-fpm.log
log_level = notice
listen = 127.0.0.1:9000
listen.allowed_clients = 127.0.0.1
pm = dynamic
pm.max_children = 50
pm.start_servers = 5
pm.min_spare_servers = 5
pm.max_spare_servers = 35
pm.max_requests = 500
env[HOSTNAME] = $HOSTNAME
env[PATH] = /usr/local/bin:/usr/bin:/bin
env[TMP] = /tmp
env[TMPDIR] = /tmp
env[TEMP] = /tmp
内容如下:
#! /bin/sh
### BEGIN INIT INFO
# Provides: php-fpm
# Required-Start: $remote_fs $network
# Required-Stop: $remote_fs $network
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: starts php-fpm
# Description: starts the PHP FastCGI Process Manager daemon
### END INIT INFO
prefix=/usr/local/php
exec_prefix=${prefix}
php_fpm_BIN=${exec_prefix}/sbin/php-fpm
php_fpm_CONF=${prefix}/etc/php-fpm.conf
php_fpm_PID=${prefix}/var/run/php-fpm.pid
php_opts="--fpm-config $php_fpm_CONF"
wait_for_pid () {
try=0
while test $try -lt 35 ; do
case "$1" in
'created')
if [ -f "$2" ] ; then
try=''
break
fi
;;
'removed')
if [ ! -f "$2" ] ; then
try=''
break
fi
;;
esac
echo -n .
try=`expr $try + 1`
sleep 1
done
}
case "$1" in
start)
echo -n "Starting php-fpm "
$php_fpm_BIN $php_opts
if [ "$?" != 0 ] ; then
echo " failed"
exit 1
fi
wait_for_pid created $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
stop)
echo -n "Gracefully shutting down php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -QUIT `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed. Use force-exit"
exit 1
else
echo " done"
fi
;;
force-quit)
echo -n "Terminating php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -TERM `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
restart)
$0 stop
$0 start
;;
reload)
echo -n "Reload service php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -USR2 `cat $php_fpm_PID`
echo " done"
;;
*)
echo "Usage: $0 {start|stop|force-quit|restart|reload}"
exit 1
;;
esac
pid /usr/local/webserver/nginx/nginx.pid;
fastcgi_send_timeout 300;
fastcgi_read_timeout 300;
#
location ~ .*/.(php|php5)?$
{
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fastcgi.conf;
}
phpinfo();
?>
- CentOS 编译 nginx+php+mysql 安装手记
- CentOS 编译 nginx+php+mysql 安装手记
- CentOS 编译 nginx+php+mysql 安装手记
- CentOS 6 编译安装Nginx+PHP+Mysql
- Centos 6.3 编译安装Nginx+php+Mysql
- CentOS 7.0编译安装Nginx+MySQL+PHP
- CentOS 7.0编译安装Nginx+MySQL+PHP
- Centos 6.3 编译安装Nginx+php+Mysql
- CentOS 7.0编译安装Nginx+MySQL+PHP
- Centos 6.5 编译安装Nginx+php+Mysql
- centos + nginx + mysql + php 环境编译安装
- centos 下 编译安装 nginx + mysql + php 服务
- CENTOS 5.8 编译安装nginx + php-fpm + mysql + pcre + apc
- Nginx + PHP + MySQL 在 CentOS 下的编译安装
- CentOS 6.3 编译安装Nginx+MySQL+PHP(转)
- Centos 编译安装LNMP环境(Nginx+MySQL+PHP)教程
- 在CentOS 7下编译安装Nginx+PHP+MySQL环境
- CentOS 安装nginx+php+mysql
- 关于IE浏览器缓存问题研究和chrome,firefox,浏览器隐私模式的体会。
- u-boot/include/command.h下的U_BOOT_CMD定义说明
- 什么是守护线程
- 如何为linux释放缓存
- Android Source code
- CentOS 编译 nginx+php+mysql 安装手记
- CentOS 编译 nginx+php+mysql 安装手记
- IplImage 中 ImageData 问题
- Java获取当前时间.
- CentOS 编译 nginx+php+mysql 安装手记
- 有没有做光功率计的一起啊
- 对中日繁字符集编码范围正则表达式的总结
- 编写每天定时切割Nginx日志的脚本
- The future of the APU