CISCO 3560恢复

来源：互联网发布：禁止系统软件安装软件编辑：程序博客网时间：2024/06/09 16:53

cisco3560交换机的iso的恢复
[B]按住交换机面板上的MODEM键，加电：

switch: BAUD=115200 //修改串口波特率到115200，这样传输速度快，完毕后将波特率修改回BAUD=9600

switch:

Xmodem file system is available.

The password-recovery mechanism is enabled.

Initializing Flash...

flashfs[0]: filesystem check interrupted!

...done Initializing Flash.

Boot Sector Filesystem (bs:) installed, fsid: 3

The system has been interrupted, or encountered an error

during initializion of the flash filesystem. The following

commands will initialize the flash filesystem, and finish

loading the operating system software:

flash_init

boot
switch:
switch:
switch: flash_init
Initializing Flash...
flashfs[0]: 3 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 3072
flashfs[0]: Bytes available: 15995904
flashfs[0]: flashfs fsck took 9 seconds.
...done Initializing Flash.
switch: boot
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch: copy xmodem: flash:c3550-i5q3l2-mz[1].121-19.EA1c.bin

不是用命令传的，是点击超级终端的文件传送，然后选择你要导入的IOS文件名，

用XMODEM方式