Jmock和Junit4结合进行mock测试
来源:互联网 发布:为什么mac没有腾讯视频 编辑:程序博客网 时间:2024/06/06 10:03
jMock 2 Cheat Sheet
Test Fixture Class
Raw
import org.jmock.Mockery;import org.jmock.Expectations;public class AJMock2TestCase ... {Mockery context = new Mockery();...}
JUnit 3 Integration
import org.jmock.integration.junit3.MockObjectTestCase;import org.jmock.Expectations;public class TurtleDrawingTest extends MockObjectTestCase {...}
JUnit 4 Integration
import org.jmock.Expectations;import org.jmock.Mockery;import org.jmock.integration.junit4.JMock;import org.jmock.integration.junit4.JUnit4Mockery;@RunWith(JMock.class)public class AJMock2TestCase {Mockery context = new JUnit4Mockery();...}
A Mockery
represents the context of the object under test: the objects that it communicates with. A Mockery creates mock objects and checks expectations that are set upon those mock objects. By convention the Mockery is stored in an instance variable named context.
Tests written with JUnit 3 can extend MockObjectTestCase, in which case they don't need to explictly create or refer to the context.
Tests written with JUnit 4 do not need to extend a specific base class but must specify that they use jMock with the@RunWith
attribute, create a JUnit4Mockery that reports expectation failures as JUnit 4 test failures, and store the Mockery in an instance variable.
Creating Mock Objects
Raw
Turtle turtle = context.mock(Turtle.class);Turtle turtle2 = context.mock(Turtle.class, "turtle2");
JUnit 3 Integration
Turtle turtle = mock(Turtle.class);Turtle turtle2 = mock(Turtle.class, "turtle2");
JUnit 4 Integration
Turtle turtle = context.mock(Turtle.class);Turtle turtle2 = context.mock(Turtle.class, "turtle2");
The examples above assume that the mock object is stored in an instance variable. If a mock object is stored in a local variable, the variable must be declared asfinal
so that it can be referred to from within expectation blocks (see below).
Tests with Expectations
Raw
... create mock objects ...public void testSomeAction() {... set up ...context.checking(new Expectations() {{... expectations go here ...}});... call code being tested ...context.assertIsSatisfied();... other assertions ...}
JUnit 3 Integration
... create mock objects ...public void testSomeAction() {... set up ...checking(new Expectations() {{... expectations go here ...}});... call code being tested ...... assertions ...}
JUnit 4 Integration
... create mock objects ...public void testSomeAction() {... set up ...context.checking(new Expectations() {{... expectations go here ...}});... call code being tested ...... assertions ...}
The JUnit 3 and JUnit 4 integration layers automatically assert that all expectations have been satisfied.
An expectations block can contain any number of expectations. A test can contain multiple expectation blocks. Expectations in later blocks are appended to those in earlier blocks. Expectations can be interspersed with calls to the code under test.
Expectations
Expectations have the following structure:
invocation-count (mock-object).method(argument-constraints);inSequence(sequence-name);when(state-machine.is(state-name));will(action);then(state-machine.is(new-state-name));
Except for the invocation count and the mock object, all clauses are optional. You can give an expectation as manyinSequence
, when
, will
and then
clauses as you wish.
Some examples:
one (turtle).turn(45); // The turtle will be told to turn 45 degrees once onlyallowing (turtle).flashLEDs(); // The turtle can be told to flash its LEDs any number of types or not at allignoring (turtle2); // Turtle 2 can be told to do anything. This test ignores it.allowing (turtle).queryPen(); // The turtle can be asked about its pen any number of times and will alwayswill(returnValue(PEN_DOWN)); // return PEN_DOWNatLeast(1).of (turtle).stop(); // The turtle will be told to stop at least once.
Invocation Count
oneThe invocation is expected once and once only.exactly(n).ofThe invocation is expected exactly n times. Note:one
is a convenient shorthand forexactly(1)
.atLeast(n).ofThe invocation is expected at least n.atMost(n).ofThe invocation is expected at most n times.between(min, max).ofThe invocation is expected at least min times and at most max times.allowingThe invocation is allowed any number of times but does not have to happen.ignoringThe same as allowing
. Allowing or ignoring should be chosen to make the test code clearly express intent.neverThe invocation is not expected at all. This is used to make tests more explicit and so easier to understand.Methods And Expectations
Expected methods are specified by a literal call to the method within an expectation block.
Arguments passed to the method in an expectation will be compared for equality.
one (calculator).add(1, 1); will(returnValue(2));one (calculator).add(2, 2); will(returnValue(5));
To define looser constraints, specify all arguments as matchers withinwith
clauses:
allowing (calculator).add(with(any(int.class)), with(any(int.class)));
Argument Matchers
The most commonly used matchers are defined in the Expectations1 class:
equal(n)The argument is equal to n.same(o)The argument is the same object as o.any(Class<T> type)The argument is any value. The type argument is required to force Java to type-check the argument at compile time.a(Class<T> type)an(Class<T> type)The argument is an instance of type or a subclass of type.aNull(Class<T> type)The argument is null. The type argument is required to force Java to type-check the argument at compile time.aNonNull(Class<T> type)The argument is not null. The type argument is required to force Java to type-check the argument at compile time.not(m)The argument does not match the Matcher m.anyOf(m1, m2, ..., mn)The argument matches one of the Matchers m1 to mn.allOf(m1, m2, ..., mn)The argument matches all of the Matchers m1 to mn.
More matchers are defined as static factory methods of the Hamcrest Matchers class2, which can be statically imported at the top of the test code.
Actions
will(returnValue(v))Return v to the caller.will(returnIterator(c))Return a new iterator over collection c on each invocation.will(returnIterator(v1, v2, ..., vn))Return a new iterator over elements v1 to vn on each invocation.will(throwException(e))Throw e to the caller.will(doAll(a1, a2, ..., an))Do all actions a1 to an on every invocation.Sequences
Invocations that are expected in a sequence must occur in the order in which they appear in the test code. A test can create more than one sequence and an expectation can be part of more than once sequence at a time.
To define a new sequence:
Raw
final Sequence sequence-name = context.sequence("sequence-name");
JUnit 3
final Sequence sequence-name = sequence("sequence-name");
JUnit 4
final Sequence sequence-name = context.sequence("sequence-name");
To expect a sequence of invocations, write the expectations in order and add theinSequence(sequence)
clause to each one. For example:
one (turtle).forward(10); inSequence(drawing);one (turtle).turn(45); inSequence(drawing);one (turtle).forward(10); inSequence(drawing);
Expectations in a sequence can have any invocation count.
States
States are used to constrain invocations to occur only when a condition is true. Conditions are represented as states of state machines. A test can create multiple state machines and each state machine can have multiple states. An invocation can be constrained to occur during a state of one more more state machines.
To define a new state machine:
Raw
final States state-machine-name = context.states("state-machine-name").startsAs("initial-state");
JUnit 3
final States state-machine-name = states("state-machine-name").startsAs("initial-state");
JUnit 4
final States state-machine-name = context.states("state-machine-name").startsAs("initial-state");
The intial state is optional. If not specified, the state machine starts in an unnamed initial state.
The following clauses constrain invocations to occur within specific states and define how an invocation will change the current state of a state machine.
when(state-machine.is("state-name"));Constrains the last expectation to occur only when the state machine is in the named state.then(state-machine.is("state-name"));Changes the state of state-machine to the named state when the invocation occurs.For example:
final States pen = context.states("pen").startsAs("up");one (turtle).penDown(); then(pen.is("down"));one (turtle).forward(10); when(pen.is("down"));one (turtle).turn(90); when(pen.is("down"));one (turtle).forward(10); when(pen.is("down"));one (turtle).penUp(); then(pen.is("up"));例子代码为:package nl.enovation.commons.monitor;import static org.junit.Assert.assertEquals;import static org.junit.Assert.assertNotNull;import java.util.Collection;import java.util.Properties;import javax.mail.Folder;import javax.mail.Message;import javax.mail.MessagingException;import javax.mail.Session;import javax.mail.Store;import javax.mail.Flags.Flag;import javax.mail.internet.MimeMessage;import nl.enovation.commons.IdGenerator;import nl.enovation.commons.MailIdGenerator;import nl.enovation.ems.commons.mailsender.MailSender;import nl.enovation.ems.commons.mailsender.SMTPMailSender;import org.jmock.Expectations;import org.jmock.Mockery;import org.jmock.lib.legacy.ClassImposteriser;import org.junit.Test;public class MailLoopMonitorTest { private Mockery context = new Mockery() {{ setImposteriser(ClassImposteriser.INSTANCE); }}; @Test public void shouldReturnOkStatus()throws Exception{ //set up final MailSender mailSender = context.mock(MailSender.class); final MailChecker mailChecker = context.mock(MailChecker.class); final String name="MailLoopMonitor"; final MailLoopMonitor mailLoopMonitor = new MailLoopMonitor(); final Status OkStatus=new Status(Status.Code.OK,name,"Ok"); final String recipient="yves.guo@localhost.com"; final String sender="yves.guo@vanad.com.cn"; final String subject="TestSubject"; final String message="TestBody"; // expectations context.checking(new Expectations() { { allowing (mailChecker).check(with(any(String.class))); will(returnValue(OkStatus)); one(mailSender).sendMessage(with(any(MimeMessage.class)),with(any(String.class)),with(any(Collection.class))); } }); //execute mailLoopMonitor.setIdGenerator(new MailIdGenerator()); mailLoopMonitor.setMailChecker(mailChecker); mailLoopMonitor.setMailSender(mailSender); mailLoopMonitor.setSender(sender); mailLoopMonitor.setRecipient(recipient); mailLoopMonitor.setSubject(subject); mailLoopMonitor.setMessage(message); assertEquals(Status.Code.OK, (mailLoopMonitor.check(name)).getCode()); // verify context.assertIsSatisfied(); } @Test public void shouldReturnErrorStatusOnSendFailure() throws Exception{ // set up final MailChecker mailChecker = context.mock(MailChecker.class); final String name="MailLoopMonitor"; final MailLoopMonitor mailLoopMonitor = new MailLoopMonitor(); final IdGenerator idGenerator=new MailIdGenerator(); final SMTPMailSender mailSender=new SMTPMailSender(); final String recipient="yves.guo@localhost.com"; final String sender="yves.guo@vanad.com.cn"; final String subject="TestSubject"; final String message="Test"; final String host="wrong smtp host";//set a wrong host,should cause connect failure. final int checkTimes=3,intervalTime=1000; // expectations context.checking(new Expectations() { { //should not execute MailCheck.check(); } }); // execute mailSender.setHost(host); mailSender.setPort(25); mailLoopMonitor.setSender(sender); mailLoopMonitor.setRecipient(recipient); mailLoopMonitor.setCheckTimes(checkTimes); mailLoopMonitor.setIntervalTime(intervalTime); mailLoopMonitor.setMailChecker(mailChecker); mailLoopMonitor.setMailSender(mailSender); mailLoopMonitor.setIdGenerator(idGenerator); mailLoopMonitor.setSubject(subject); mailLoopMonitor.setMessage(message); Status status=mailLoopMonitor.check(name); assertEquals(Status.Code.CRITICAL, status.getCode()); assertNotNull(status.getCause()); assertNotNull(status.getMessage()); // verify context.assertIsSatisfied(); } @Test public void shouldReturnErrorStatusOnConnectedFailure()throws Exception{ //set up final MailSender mailSender = context.mock(MailSender.class); final IdGenerator idGenerator=context.mock(MailIdGenerator.class); final String name="MailLoopMonitor"; final String recipient="yves.guo@localhost.com"; final String sender="yves.guo@vanad.com.cn"; final String receiver="yves"; final String subject="TestSubject"; final String message="TestBody"; final String host="wrong host"; //a wrong pop3 host final MailLoopMonitor mailLoopMonitor = new MailLoopMonitor(); final Pop3MailChecker pop3MailChecker=new Pop3MailChecker(); // expectations context.checking(new Expectations() { { allowing(idGenerator).getNextId(); will(returnValue("2007-12-337 13:12:3750")); one(mailSender).sendMessage(with(any(MimeMessage.class)),with(any(String.class)),with(any(Collection.class))); } }); //execute Properties props = new Properties(); props.put("mail.pop3.host",host); Session session = Session.getDefaultInstance(props, null); pop3MailChecker.setStore(session.getStore("pop3")); pop3MailChecker.setHost(host); pop3MailChecker.setPort(110); pop3MailChecker.setUser(receiver); pop3MailChecker.setPassword(""); mailLoopMonitor.setIdGenerator(idGenerator); mailLoopMonitor.setMailChecker(pop3MailChecker); mailLoopMonitor.setMailSender(mailSender); mailLoopMonitor.setSender(sender); mailLoopMonitor.setRecipient(recipient); mailLoopMonitor.setSubject(subject); mailLoopMonitor.setMessage(message); Status status =mailLoopMonitor.check(name); assertEquals(Status.Code.CRITICAL, status.getCode()); assertNotNull(status.getCause()); assertNotNull(status.getMessage()); // verify context.assertIsSatisfied(); } @Test public void shouldReturnErrorStatusOnGetMessagesFromFolderFailure()throws Exception{ //set up final MailSender mailSender = context.mock(MailSender.class); final Store store=context.mock(Store.class); final Folder folder=context.mock(Folder.class); final String name="MailLoopMonitor"; final String recipient="yves.guo@localhost.com"; final String sender="yves.guo@vanad.com.cn"; final String subject="TestSubject"; final String message="TestBody"; final MailLoopMonitor mailLoopMonitor = new MailLoopMonitor(); final Pop3MailChecker pop3MailChecker=new Pop3MailChecker(); // expectations context.checking(new Expectations() { { one(mailSender).sendMessage(with(any(MimeMessage.class)),with(any(String.class)),with(any(Collection.class))); allowing(store).connect(with(any(String.class)),with(any(String.class)),with(any(String.class))); allowing(store).isConnected();will(returnValue(false)); allowing(store).close(); allowing(folder).open(Folder.READ_WRITE); allowing(folder).close(true); allowing(folder).isOpen();will(returnValue(false)); allowing(folder).getMessages();will(throwException(new MessagingException())); } }); //execute pop3MailChecker.setStore(store); pop3MailChecker.setFolder(folder); mailLoopMonitor.setIdGenerator(new MailIdGenerator()); mailLoopMonitor.setMailChecker(pop3MailChecker); mailLoopMonitor.setMailSender(mailSender); mailLoopMonitor.setSender(sender); mailLoopMonitor.setRecipient(recipient); mailLoopMonitor.setSubject(subject); mailLoopMonitor.setMessage(message); Status status =mailLoopMonitor.check(name); assertEquals(Status.Code.CRITICAL, status.getCode()); assertNotNull(status.getCause()); assertNotNull(status.getMessage()); // verify context.assertIsSatisfied(); } @Test public void shouldReturnNoMatchedMessageIDsOnMacthID()throws Exception{ //set up final MailSender mailSender = context.mock(MailSender.class); final IdGenerator idGenerator=context.mock(MailIdGenerator.class); final Store store=context.mock(Store.class); final Folder folder=context.mock(Folder.class); final Message mockedMessage=context.mock(Message.class); final String name="MailLoopMonitor"; final String recipient="yves.guo@localhost.com"; final String sender="yves.guo@vanad.com.cn"; final String subject="TestSubject"; final String message="TestBody"; final Message[] messages={mockedMessage}; final MailLoopMonitor mailLoopMonitor = new MailLoopMonitor(); final Pop3MailChecker pop3MailChecker=new Pop3MailChecker(); final String generatedID="2007-12-337 13:12:3750"; final String[] headInformation = {"not the same as generatedID"};//not the same as generatedID, //should return No matched message IDs // expectations context.checking(new Expectations() { { allowing(idGenerator).getNextId();will(returnValue(generatedID)); one(mailSender).sendMessage(with(any(MimeMessage.class)),with(any(String.class)),with(any(Collection.class))); allowing(store).connect(with(any(String.class)),with(any(String.class)),with(any(String.class))); allowing(store).isConnected();will(returnValue(false)); allowing(store).close(); allowing(folder).open(Folder.READ_WRITE); allowing(folder).close(true); allowing(folder).isOpen();will(returnValue(false)); allowing(folder).getMessages();will(returnValue(messages)); allowing(mockedMessage).getHeader("Generated-ID");will(returnValue(headInformation)); allowing(mockedMessage).setFlag(Flag.DELETED, true); } }); //execute pop3MailChecker.setStore(store); pop3MailChecker.setFolder(folder); mailLoopMonitor.setIdGenerator(idGenerator); mailLoopMonitor.setMailChecker(pop3MailChecker); mailLoopMonitor.setMailSender(mailSender); mailLoopMonitor.setSender(sender); mailLoopMonitor.setRecipient(recipient); mailLoopMonitor.setSubject(subject); mailLoopMonitor.setMessage(message); Status status =mailLoopMonitor.check(name); assertEquals(Status.Code.CRITICAL, status.getCode()); assertNotNull(status.getCause()); assertNotNull(status.getMessage()); // verify context.assertIsSatisfied(); } @Test public void shouldReturnErrorStatusOnOpenFolderFailure()throws Exception{ //set up final MailSender mailSender = context.mock(MailSender.class); final Store store=context.mock(Store.class); final Folder folder=context.mock(Folder.class); final String name="MailLoopMonitor"; final String recipient="yves.guo@localhost.com"; final String sender="yves.guo@vanad.com.cn"; final String subject="TestSubject"; final String message="TestBody"; final MailLoopMonitor mailLoopMonitor = new MailLoopMonitor(); final Pop3MailChecker pop3MailChecker=new Pop3MailChecker(); // expectations context.checking(new Expectations() { { one(mailSender).sendMessage(with(any(MimeMessage.class)),with(any(String.class)),with(any(Collection.class))); allowing(store).connect(with(any(String.class)),with(any(String.class)),with(any(String.class))); allowing(store).isConnected();will(returnValue(false)); allowing(store).close(); allowing(folder).open(Folder.READ_WRITE);will(throwException(new MessagingException())); allowing(folder).close(true); allowing(folder).isOpen();will(returnValue(false)); } }); //execute pop3MailChecker.setStore(store); pop3MailChecker.setFolder(folder); mailLoopMonitor.setIdGenerator(new MailIdGenerator()); mailLoopMonitor.setMailChecker(pop3MailChecker); mailLoopMonitor.setMailSender(mailSender); mailLoopMonitor.setSender(sender); mailLoopMonitor.setRecipient(recipient); mailLoopMonitor.setSubject(subject); mailLoopMonitor.setMessage(message); Status status =mailLoopMonitor.check(name); assertEquals(Status.Code.CRITICAL, status.getCode()); assertNotNull(status.getCause()); assertNotNull(status.getMessage()); // verify context.assertIsSatisfied(); } }
- Jmock和Junit4结合进行mock测试
- JMock+Junit4结合完成TDD实例
- 简单示例mock的使用 (Junit结合Jmock)
- 使用spring提供的测试功能结合JUnit4进行单元测试
- 使用Junit4 大结,和一点MOCK
- Jmock测试
- 使用Mock Object进行测试
- 使用Mock Object进行测试
- 使用Mock Object进行测试
- 使用Mock Object进行测试
- Mockito结合spring进行跨层 mock
- maven中使用spring的test包结合junit4进行测试。
- Spring+Junit4进行接口测试
- Spring+Junit4进行接口测试
- Junit4进行参数化测试
- SpringTest+Junit4框架进行测试
- Spring3.0结合JUnit4进行单元测试
- 在junit中利用jmock进行测试出现的问题
- android 文件下载(一)
- 有用的网站和工具
- tesseract-ocr
- Asp.net获取当前目录的三种方法
- Visual Assist X 10.6.1837完美破解版(带VS2010破解)
- Jmock和Junit4结合进行mock测试
- *(p+i)【 i为位移量 】
- HTTP协议详解
- std::map 通过遍历删除满足某些条件元素的两种方式
- 让CAS退出后返回指定的页面
- 第三章 数组的解剖学
- 详解java学习中堆与栈的内容
- Actors in Scala(Scala中的Actor)(预打印版) 第六章 Exception Handling, Actor Termination and Shutdown(A)
- javascript的window.onload与jquery的$(document).ready()