usb4-配置usb触摸屏

淘了一个触摸屏,usb接口,四线电阻,usb芯片是cy7c63723c。
此芯片一端接触摸屏的四根线，对触摸动作采样然后ad转换，一端通过usb接mini2440，即将ad转换后的数据通过usb接口发给mini2440.
linux2.6.32已经集成usb 触摸屏驱动，mini2440默认是不配置的。可以配置一下
make menuconfig 之后选择
 Device Drivers  --->        Input device support  --->    [*]   Touchscreens  ---> <*>   USB Touchscreen Driver
即如图

分析一下这一项的帮助信息，如下,可知其对应的编译符号是 TOUCHSCREEN_USB_COMPOSITE

先说一下，depends on
从此项可知这个符号需要根据这些编译符号的配置来显示，!S390 [=S390] && INPUT [=y] && INPUT_TOUCHSCREEN [=y] && USB_ARCH_HAS_HCD [=y]
比如符号 INPUT_TOUCHSCREEN 要配置成y，而符号 INPUT_TOUCHSCREEN 就是 Touchscreens 这一项，如下

看他的帮助信息，这一项Touchscreens  就是代表符号INPUT_TOUCHSCREEN

其余类似

再看一下，Defined at drivers/input/touchscreen/Kconfig:415 这句话有何用
他可以帮助我们找到此项的源代码，如下，可以知道本项对应的源代码是usbtouchscreen.c


直接从该项help里的最上面的提示也可以找到，即CONFIG_TOUCHSCREEN_USB_COMPOSITE，然后去Makefile查找这个东东即可。

//Kconfig中符号TOUCHSCREEN_USB_COMPOSITE具体信息config TOUCHSCREEN_USB_COMPOSITEtristate "USB Touchscreen Driver"depends on USB_ARCH_HAS_HCD//只有这个符号有选，符号TOUCHSCREEN_USB_COMPOSITE才会出现在menu中，跟上面第2个图显示的deponds on外形有些不同，但一样的select USBhelp  USB Touchscreen driver for:  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)  - PanJit TouchSet USB  - 3M MicroTouch USB (EX II series)  - ITM  - some other eTurboTouch  - Gunze AHL61  - DMC TSC-10/25  - IRTOUCHSYSTEMS/UNITOP  - IdealTEK URTC1000  - GoTop Super_Q2/GogoPen/PenPower tablets  - JASTEC USB Touch Controller/DigiTech DTR-02U  Have a look at <http://linux.chapter7.ch/touchkit/> for  a usage description and the required user-space stuff.  To compile this driver as a module, choose M here: the  module will be called usbtouchscreen.

/****************************************************************************** * usbtouchscreen.c * Driver for USB Touchscreens, supporting those devices: *  - eGalax Touchkit *    includes eTurboTouch CT-410/510/700 *  - 3M/Microtouch  EX II series *  - ITM *  - PanJit TouchSet *  - eTurboTouch *  - Gunze AHL61 *  - DMC TSC-10/25 *  - IRTOUCHSYSTEMS/UNITOP *  - IdealTEK URTC1000 *  - General Touch *  - GoTop Super_Q2/GogoPen/PenPower tablets *  - JASTEC USB touch controller/DigiTech DTR-02U * * Copyright (C) 2004-2007 by Daniel Ritz <[e-mail]> * Copyright (C) by Todd E. Johnson (mtouchusb.c) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * Driver is based on touchkitusb.c * - ITM parts are from itmtouch.c * - 3M parts are from mtouchusb.c * - PanJit parts are from an unmerged driver by Lanslott Gish * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged *   driver from Marius Vollmer * *****************************************************************************///#define DEBUG#include <linux/kernel.h>#include <linux/slab.h>#include <linux/input.h>#include <linux/module.h>#include <linux/init.h>#include <linux/usb.h>#include <linux/usb/input.h>#include <linux/hid.h>#define DRIVER_VERSION"v0.6"#define DRIVER_AUTHOR"Daniel Ritz <[e-mail]>"#define DRIVER_DESC"USB Touchscreen Driver"static int swap_xy;module_param(swap_xy, bool, 0644);MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");static int hwcalib_xy;module_param(hwcalib_xy, bool, 0644);MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available");/* device specifc data/functions */struct usbtouch_usb;struct usbtouch_device_info {int min_xc, max_xc;int min_yc, max_yc;int min_press, max_press;int rept_size;void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);/* * used to get the packet len. possible return values: * > 0: packet len * = 0: skip one byte * < 0: -return value more bytes needed */int  (*get_pkt_len) (unsigned char *pkt, int len);int  (*read_data)   (struct usbtouch_usb *usbtouch, unsigned char *pkt);int  (*init)        (struct usbtouch_usb *usbtouch);};/* a usbtouch device */struct usbtouch_usb {unsigned char *data;dma_addr_t data_dma;unsigned char *buffer;int buf_len;struct urb *irq;struct usb_device *udev;struct input_dev *input;struct usbtouch_device_info *type;char name[128];char phys[64];int x, y;int touch, press;};/* device types */enum {DEVTYPE_IGNORE = -1,DEVTYPE_EGALAX,DEVTYPE_PANJIT,DEVTYPE_3M,DEVTYPE_ITM,DEVTYPE_ETURBO,DEVTYPE_GUNZE,DEVTYPE_DMC_TSC10,DEVTYPE_IRTOUCH,DEVTYPE_IDEALTEK,DEVTYPE_GENERAL_TOUCH,DEVTYPE_GOTOP,DEVTYPE_JASTEC,DEVTYPE_E2I,};#define USB_DEVICE_HID_CLASS(vend, prod) \.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \| USB_DEVICE_ID_MATCH_INT_PROTOCOL \| USB_DEVICE_ID_MATCH_DEVICE, \.idVendor = (vend), \.idProduct = (prod), \.bInterfaceClass = USB_INTERFACE_CLASS_HID, \.bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSEstatic struct usb_device_id usbtouch_devices[] = {#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX/* ignore the HID capable devices, handled by usbhid */{USB_DEVICE_HID_CLASS(0x0eef, 0x0001), .driver_info = DEVTYPE_IGNORE},{USB_DEVICE_HID_CLASS(0x0eef, 0x0002), .driver_info = DEVTYPE_IGNORE},/* normal device IDs */{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},{USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX},{USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},{USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX},{USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX},{USB_DEVICE(0x1234, 0x0001), .driver_info = DEVTYPE_EGALAX},{USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX},#endif#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT{USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT},{USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT},{USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT},{USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT},#endif#ifdef CONFIG_TOUCHSCREEN_USB_3M{USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M},#endif#ifdef CONFIG_TOUCHSCREEN_USB_ITM{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},#endif#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO{USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO},#endif#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE{USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},#endif#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10{USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},#endif#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH{USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH},{USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH},#endif#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK{USB_DEVICE(0x1391, 0x1000), .driver_info = DEVTYPE_IDEALTEK},#endif#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH{USB_DEVICE(0x0dfc, 0x0001), .driver_info = DEVTYPE_GENERAL_TOUCH},#endif#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP{USB_DEVICE(0x08f2, 0x007f), .driver_info = DEVTYPE_GOTOP},{USB_DEVICE(0x08f2, 0x00ce), .driver_info = DEVTYPE_GOTOP},{USB_DEVICE(0x08f2, 0x00f4), .driver_info = DEVTYPE_GOTOP},#endif#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC{USB_DEVICE(0x0f92, 0x0001), .driver_info = DEVTYPE_JASTEC},#endif#ifdef CONFIG_TOUCHSCREEN_USB_E2I{USB_DEVICE(0x1ac7, 0x0001), .driver_info = DEVTYPE_E2I},#endif{}};/***************************************************************************** * e2i Part */#ifdef CONFIG_TOUCHSCREEN_USB_E2Istatic int e2i_init(struct usbtouch_usb *usbtouch){int ret;ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),                      0x01, 0x02, 0x0000, 0x0081,                      NULL, 0, USB_CTRL_SET_TIMEOUT);dbg("%s - usb_control_msg - E2I_RESET - bytes|err: %d",    __func__, ret);return ret;}static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt){int tmp = (pkt[0] << 8) | pkt[1];dev->x  = (pkt[2] << 8) | pkt[3];dev->y  = (pkt[4] << 8) | pkt[5];tmp = tmp - 0xA000;dev->touch = (tmp > 0);dev->press = (tmp > 0 ? tmp : 0);return 1;}#endif/***************************************************************************** * eGalax part */#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX#ifndef MULTI_PACKET#define MULTI_PACKET#endif#define EGALAX_PKT_TYPE_MASK0xFE#define EGALAX_PKT_TYPE_REPT0x80#define EGALAX_PKT_TYPE_DIAG0x0Astatic int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt){if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT)return 0;dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);dev->touch = pkt[0] & 0x01;return 1;}static int egalax_get_pkt_len(unsigned char *buf, int len){switch (buf[0] & EGALAX_PKT_TYPE_MASK) {case EGALAX_PKT_TYPE_REPT:return 5;case EGALAX_PKT_TYPE_DIAG:if (len < 2)return -1;return buf[1] + 2;}return 0;}#endif/***************************************************************************** * PanJit Part */#ifdef CONFIG_TOUCHSCREEN_USB_PANJITstatic int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt){dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];dev->touch = pkt[0] & 0x01;return 1;}#endif/***************************************************************************** * 3M/Microtouch Part */#ifdef CONFIG_TOUCHSCREEN_USB_3M#define MTOUCHUSB_ASYNC_REPORT          1#define MTOUCHUSB_RESET                 7#define MTOUCHUSB_REQ_CTRLLR_ID         10static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt){if (hwcalib_xy) {dev->x = (pkt[4] << 8) | pkt[3];dev->y = 0xffff - ((pkt[6] << 8) | pkt[5]);} else {dev->x = (pkt[8] << 8) | pkt[7];dev->y = (pkt[10] << 8) | pkt[9];}dev->touch = (pkt[2] & 0x40) ? 1 : 0;return 1;}static int mtouch_init(struct usbtouch_usb *usbtouch){int ret, i;ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),                      MTOUCHUSB_RESET,                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,                      1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",    __func__, ret);if (ret < 0)return ret;msleep(150);for (i = 0; i < 3; i++) {ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),      MTOUCHUSB_ASYNC_REPORT,      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,      1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",    __func__, ret);if (ret >= 0)break;if (ret != -EPIPE)return ret;}/* Default min/max xy are the raw values, override if using hw-calib */if (hwcalib_xy) {input_set_abs_params(usbtouch->input, ABS_X, 0, 0xffff, 0, 0);input_set_abs_params(usbtouch->input, ABS_Y, 0, 0xffff, 0, 0);}return 0;}#endif/***************************************************************************** * ITM Part */#ifdef CONFIG_TOUCHSCREEN_USB_ITMstatic int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt){int touch;/* * ITM devices report invalid x/y data if not touched. * if the screen was touched before but is not touched any more * report touch as 0 with the last valid x/y data once. then stop * reporting data until touched again. */dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);touch = ~pkt[7] & 0x20;if (!touch) {if (dev->touch) {dev->touch = 0;return 1;}return 0;}dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);dev->touch = touch;return 1;}#endif/***************************************************************************** * eTurboTouch part */#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO#ifndef MULTI_PACKET#define MULTI_PACKET#endifstatic int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt){unsigned int shift;/* packets should start with sync */if (!(pkt[0] & 0x80))return 0;shift = (6 - (pkt[0] & 0x03));dev->x = ((pkt[3] << 7) | pkt[4]) >> shift;dev->y = ((pkt[1] << 7) | pkt[2]) >> shift;dev->touch = (pkt[0] & 0x10) ? 1 : 0;return 1;}static int eturbo_get_pkt_len(unsigned char *buf, int len){if (buf[0] & 0x80)return 5;if (buf[0] == 0x01)return 3;return 0;}#endif/***************************************************************************** * Gunze part */#ifdef CONFIG_TOUCHSCREEN_USB_GUNZEstatic int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt){if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))return 0;dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);dev->touch = pkt[0] & 0x20;return 1;}#endif/***************************************************************************** * DMC TSC-10/25 Part * * Documentation about the controller and it's protocol can be found at *   http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf *   http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf */#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10/* supported data rates. currently using 130 */#define TSC10_RATE_POINT0x50#define TSC10_RATE_300x40#define TSC10_RATE_500x41#define TSC10_RATE_800x42#define TSC10_RATE_1000x43#define TSC10_RATE_1300x44#define TSC10_RATE_1500x45/* commands */#define TSC10_CMD_RESET0x55#define TSC10_CMD_RATE0x05#define TSC10_CMD_DATA10x01static int dmc_tsc10_init(struct usbtouch_usb *usbtouch){struct usb_device *dev = usbtouch->udev;int ret = -ENOMEM;unsigned char *buf;buf = kmalloc(2, GFP_KERNEL);if (!buf)goto err_nobuf;/* reset */buf[0] = buf[1] = 0xFF;ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),                      TSC10_CMD_RESET,                      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,                      0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);if (ret < 0)goto err_out;if (buf[0] != 0x06) {ret = -ENODEV;goto err_out;}/* set coordinate output rate */buf[0] = buf[1] = 0xFF;ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),                      TSC10_CMD_RATE,                      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,                      TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);if (ret < 0)goto err_out;if ((buf[0] != 0x06) && (buf[0] != 0x15 || buf[1] != 0x01)) {ret = -ENODEV;goto err_out;}/* start sending data */ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),                      TSC10_CMD_DATA1,                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,                      0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);err_out:kfree(buf);err_nobuf:return ret;}static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt){dev->x = ((pkt[2] & 0x03) << 8) | pkt[1];dev->y = ((pkt[4] & 0x03) << 8) | pkt[3];dev->touch = pkt[0] & 0x01;return 1;}#endif/***************************************************************************** * IRTOUCH Part */#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCHstatic int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt){dev->x = (pkt[3] << 8) | pkt[2];dev->y = (pkt[5] << 8) | pkt[4];dev->touch = (pkt[1] & 0x03) ? 1 : 0;return 1;}#endif/***************************************************************************** * IdealTEK URTC1000 Part */#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK#ifndef MULTI_PACKET#define MULTI_PACKET#endifstatic int idealtek_get_pkt_len(unsigned char *buf, int len){if (buf[0] & 0x80)return 5;if (buf[0] == 0x01)return len;return 0;}static int idealtek_read_data(struct usbtouch_usb *dev, unsigned char *pkt){switch (pkt[0] & 0x98) {case 0x88:/* touch data in IdealTEK mode */dev->x = (pkt[1] << 5) | (pkt[2] >> 2);dev->y = (pkt[3] << 5) | (pkt[4] >> 2);dev->touch = (pkt[0] & 0x40) ? 1 : 0;return 1;case 0x98:/* touch data in MT emulation mode */dev->x = (pkt[2] << 5) | (pkt[1] >> 2);dev->y = (pkt[4] << 5) | (pkt[3] >> 2);dev->touch = (pkt[0] & 0x40) ? 1 : 0;return 1;default:return 0;}}#endif/***************************************************************************** * General Touch Part */#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCHstatic int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt){dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1] ;dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3] ;dev->press = pkt[5] & 0xff;dev->touch = pkt[0] & 0x01;return 1;}#endif/***************************************************************************** * GoTop Part */#ifdef CONFIG_TOUCHSCREEN_USB_GOTOPstatic int gotop_read_data(struct usbtouch_usb *dev, unsigned char *pkt){dev->x = ((pkt[1] & 0x38) << 4) | pkt[2];dev->y = ((pkt[1] & 0x07) << 7) | pkt[3];dev->touch = pkt[0] & 0x01;return 1;}#endif/***************************************************************************** * JASTEC Part */#ifdef CONFIG_TOUCHSCREEN_USB_JASTECstatic int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt){dev->x = ((pkt[0] & 0x3f) << 6) | (pkt[2] & 0x3f);dev->y = ((pkt[1] & 0x3f) << 6) | (pkt[3] & 0x3f);dev->touch = (pkt[0] & 0x40) >> 6;return 1;}#endif/***************************************************************************** * the different device descriptors */#ifdef MULTI_PACKETstatic void usbtouch_process_multi(struct usbtouch_usb *usbtouch,   unsigned char *pkt, int len);#endifstatic struct usbtouch_device_info usbtouch_dev_info[] = {#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX[DEVTYPE_EGALAX] = {.min_xc= 0x0,.max_xc= 0x07ff,.min_yc= 0x0,.max_yc= 0x07ff,.rept_size= 16,.process_pkt= usbtouch_process_multi,.get_pkt_len= egalax_get_pkt_len,.read_data= egalax_read_data,},#endif#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT[DEVTYPE_PANJIT] = {.min_xc= 0x0,.max_xc= 0x0fff,.min_yc= 0x0,.max_yc= 0x0fff,.rept_size= 8,.read_data= panjit_read_data,},#endif#ifdef CONFIG_TOUCHSCREEN_USB_3M[DEVTYPE_3M] = {.min_xc= 0x0,.max_xc= 0x4000,.min_yc= 0x0,.max_yc= 0x4000,.rept_size= 11,.read_data= mtouch_read_data,.init= mtouch_init,},#endif#ifdef CONFIG_TOUCHSCREEN_USB_ITM[DEVTYPE_ITM] = {.min_xc= 0x0,.max_xc= 0x0fff,.min_yc= 0x0,.max_yc= 0x0fff,.max_press= 0xff,.rept_size= 8,.read_data= itm_read_data,},#endif#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO[DEVTYPE_ETURBO] = {.min_xc= 0x0,.max_xc= 0x07ff,.min_yc= 0x0,.max_yc= 0x07ff,.rept_size= 8,.process_pkt= usbtouch_process_multi,.get_pkt_len= eturbo_get_pkt_len,.read_data= eturbo_read_data,},#endif#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE[DEVTYPE_GUNZE] = {.min_xc= 0x0,.max_xc= 0x0fff,.min_yc= 0x0,.max_yc= 0x0fff,.rept_size= 4,.read_data= gunze_read_data,},#endif#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10[DEVTYPE_DMC_TSC10] = {.min_xc= 0x0,.max_xc= 0x03ff,.min_yc= 0x0,.max_yc= 0x03ff,.rept_size= 5,.init= dmc_tsc10_init,.read_data= dmc_tsc10_read_data,},#endif#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH[DEVTYPE_IRTOUCH] = {.min_xc= 0x0,.max_xc= 0x0fff,.min_yc= 0x0,.max_yc= 0x0fff,.rept_size= 8,.read_data= irtouch_read_data,},#endif#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK[DEVTYPE_IDEALTEK] = {.min_xc= 0x0,.max_xc= 0x0fff,.min_yc= 0x0,.max_yc= 0x0fff,.rept_size= 8,.process_pkt= usbtouch_process_multi,.get_pkt_len= idealtek_get_pkt_len,.read_data= idealtek_read_data,},#endif#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH[DEVTYPE_GENERAL_TOUCH] = {.min_xc= 0x0,.max_xc= 0x0500,.min_yc= 0x0,.max_yc= 0x0500,.rept_size= 7,.read_data= general_touch_read_data,},#endif#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP[DEVTYPE_GOTOP] = {.min_xc= 0x0,.max_xc= 0x03ff,.min_yc= 0x0,.max_yc= 0x03ff,.rept_size= 4,.read_data= gotop_read_data,},#endif#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC[DEVTYPE_JASTEC] = {.min_xc= 0x0,.max_xc= 0x0fff,.min_yc= 0x0,.max_yc= 0x0fff,.rept_size= 4,.read_data= jastec_read_data,},#endif#ifdef CONFIG_TOUCHSCREEN_USB_E2I[DEVTYPE_E2I] = {.min_xc= 0x0,.max_xc= 0x7fff,.min_yc= 0x0,.max_yc= 0x7fff,.rept_size= 6,.init= e2i_init,.read_data= e2i_read_data,},#endif};/***************************************************************************** * Generic Part */static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,                                 unsigned char *pkt, int len){struct usbtouch_device_info *type = usbtouch->type;if (!type->read_data(usbtouch, pkt))return;input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch);if (swap_xy) {input_report_abs(usbtouch->input, ABS_X, usbtouch->y);input_report_abs(usbtouch->input, ABS_Y, usbtouch->x);} else {input_report_abs(usbtouch->input, ABS_X, usbtouch->x);input_report_abs(usbtouch->input, ABS_Y, usbtouch->y);}if (type->max_press)input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press);input_sync(usbtouch->input);}#ifdef MULTI_PACKETstatic void usbtouch_process_multi(struct usbtouch_usb *usbtouch,                                   unsigned char *pkt, int len){unsigned char *buffer;int pkt_len, pos, buf_len, tmp;/* process buffer */if (unlikely(usbtouch->buf_len)) {/* try to get size */pkt_len = usbtouch->type->get_pkt_len(usbtouch->buffer, usbtouch->buf_len);/* drop? */if (unlikely(!pkt_len))goto out_flush_buf;/* need to append -pkt_len bytes before able to get size */if (unlikely(pkt_len < 0)) {int append = -pkt_len;if (unlikely(append > len))       append = len;if (usbtouch->buf_len + append >= usbtouch->type->rept_size)goto out_flush_buf;memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append);usbtouch->buf_len += append;pkt_len = usbtouch->type->get_pkt_len(usbtouch->buffer, usbtouch->buf_len);if (pkt_len < 0)return;}/* append */tmp = pkt_len - usbtouch->buf_len;if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size)goto out_flush_buf;memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp);usbtouch_process_pkt(usbtouch, usbtouch->buffer, pkt_len);buffer = pkt + tmp;buf_len = len - tmp;} else {buffer = pkt;buf_len = len;}/* loop over the received packet, process */pos = 0;while (pos < buf_len) {/* get packet len */pkt_len = usbtouch->type->get_pkt_len(buffer + pos,buf_len - pos);/* unknown packet: skip one byte */if (unlikely(!pkt_len)) {pos++;continue;}/* full packet: process */if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) {usbtouch_process_pkt(usbtouch, buffer + pos, pkt_len);} else {/* incomplete packet: save in buffer */memcpy(usbtouch->buffer, buffer + pos, buf_len - pos);usbtouch->buf_len = buf_len - pos;return;}pos += pkt_len;}out_flush_buf:usbtouch->buf_len = 0;return;}#endifstatic void usbtouch_irq(struct urb *urb){struct usbtouch_usb *usbtouch = urb->context;int retval;switch (urb->status) {case 0:/* success */break;case -ETIME:/* this urb is timing out */dbg("%s - urb timed out - was the device unplugged?",    __func__);return;case -ECONNRESET:case -ENOENT:case -ESHUTDOWN:/* this urb is terminated, clean up */dbg("%s - urb shutting down with status: %d",    __func__, urb->status);return;default:dbg("%s - nonzero urb status received: %d",    __func__, urb->status);goto exit;}usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length);exit:retval = usb_submit_urb(urb, GFP_ATOMIC);if (retval)err("%s - usb_submit_urb failed with result: %d",    __func__, retval);}static int usbtouch_open(struct input_dev *input){struct usbtouch_usb *usbtouch = input_get_drvdata(input);usbtouch->irq->dev = usbtouch->udev;if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))return -EIO;return 0;}static void usbtouch_close(struct input_dev *input){struct usbtouch_usb *usbtouch = input_get_drvdata(input);usb_kill_urb(usbtouch->irq);}static void usbtouch_free_buffers(struct usb_device *udev,  struct usbtouch_usb *usbtouch){usb_buffer_free(udev, usbtouch->type->rept_size,                usbtouch->data, usbtouch->data_dma);kfree(usbtouch->buffer);}static int usbtouch_probe(struct usb_interface *intf,  const struct usb_device_id *id){struct usbtouch_usb *usbtouch;struct input_dev *input_dev;struct usb_host_interface *interface;struct usb_endpoint_descriptor *endpoint;struct usb_device *udev = interface_to_usbdev(intf);struct usbtouch_device_info *type;int err = -ENOMEM;/* some devices are ignored */if (id->driver_info == DEVTYPE_IGNORE)return -ENODEV;interface = intf->cur_altsetting;endpoint = &interface->endpoint[0].desc;usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL);input_dev = input_allocate_device();if (!usbtouch || !input_dev)goto out_free;type = &usbtouch_dev_info[id->driver_info];usbtouch->type = type;if (!type->process_pkt)type->process_pkt = usbtouch_process_pkt;usbtouch->data = usb_buffer_alloc(udev, type->rept_size,                                  GFP_KERNEL, &usbtouch->data_dma);if (!usbtouch->data)goto out_free;if (type->get_pkt_len) {usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL);if (!usbtouch->buffer)goto out_free_buffers;}usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL);if (!usbtouch->irq) {dbg("%s - usb_alloc_urb failed: usbtouch->irq", __func__);goto out_free_buffers;}usbtouch->udev = udev;usbtouch->input = input_dev;if (udev->manufacturer)strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name));if (udev->product) {if (udev->manufacturer)strlcat(usbtouch->name, " ", sizeof(usbtouch->name));strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name));}if (!strlen(usbtouch->name))snprintf(usbtouch->name, sizeof(usbtouch->name),"USB Touchscreen %04x:%04x", le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct));usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys));strlcat(usbtouch->phys, "/input0", sizeof(usbtouch->phys));input_dev->name = usbtouch->name;input_dev->phys = usbtouch->phys;usb_to_input_id(udev, &input_dev->id);input_dev->dev.parent = &intf->dev;input_set_drvdata(input_dev, usbtouch);input_dev->open = usbtouch_open;input_dev->close = usbtouch_close;input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0);input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0);if (type->max_press)input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,                     type->max_press, 0, 0);usb_fill_int_urb(usbtouch->irq, usbtouch->udev, usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress), usbtouch->data, type->rept_size, usbtouch_irq, usbtouch, endpoint->bInterval);usbtouch->irq->dev = usbtouch->udev;usbtouch->irq->transfer_dma = usbtouch->data_dma;usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;/* device specific init */if (type->init) {err = type->init(usbtouch);if (err) {dbg("%s - type->init() failed, err: %d", __func__, err);goto out_free_buffers;}}err = input_register_device(usbtouch->input);if (err) {dbg("%s - input_register_device failed, err: %d", __func__, err);goto out_free_buffers;}usb_set_intfdata(intf, usbtouch);return 0;out_free_buffers:usbtouch_free_buffers(udev, usbtouch);out_free:input_free_device(input_dev);kfree(usbtouch);return err;}static void usbtouch_disconnect(struct usb_interface *intf){struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);dbg("%s - called", __func__);if (!usbtouch)return;dbg("%s - usbtouch is initialized, cleaning up", __func__);usb_set_intfdata(intf, NULL);usb_kill_urb(usbtouch->irq);input_unregister_device(usbtouch->input);usb_free_urb(usbtouch->irq);usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);kfree(usbtouch);}MODULE_DEVICE_TABLE(usb, usbtouch_devices);static struct usb_driver usbtouch_driver = {.name= "usbtouchscreen",.probe= usbtouch_probe,.disconnect= usbtouch_disconnect,.id_table= usbtouch_devices,};static int __init usbtouch_init(void){return usb_register(&usbtouch_driver);}static void __exit usbtouch_cleanup(void){usb_deregister(&usbtouch_driver);}module_init(usbtouch_init);module_exit(usbtouch_cleanup);MODULE_AUTHOR(DRIVER_AUTHOR);MODULE_DESCRIPTION(DRIVER_DESC);MODULE_LICENSE("GPL");MODULE_ALIAS("touchkitusb");MODULE_ALIAS("itmtouch");MODULE_ALIAS("mtouchusb");