Linux下线程的调度策略与优先级(二)
来源:互联网 发布:淘宝网汽车模型 编辑:程序博客网 时间:2024/05/16 14:52
Linux下线程的调度策略与优先级(二)
上一篇文章介绍了Linux下的调度策略和优先级,在Ubuntu09.10上的一些特性,这里测试一下其中的两种特性,SCHED_OTHER和SCHED_RR,还有就是优先级的问题,是不是能够保证,高优先级的线程,就可以保证先运行。
下面的这个测试程序,创建了三个线程,默认创建的线程的调度策略是SCHED_OTHER,其余的两个线程的调度策略设置成SCHED_RR。我的Linux的内核版本是2.6.31。SCHED_RR是根据时间片来确定线程的调度。时间片用完了,不管这个线程的优先级有多高都不会在运行,而是进入就绪队列中,等待下一个时间片的到了,那这个时间片到底要持续多长时间?在《深入理解Linux内核》中的第七章进程调度中,是这样描诉的,Linux采取单凭经验的方法,即选择尽可能长、同时能保持良好相应时间的一个时间片。这里也没有给出一个具体的时间来,可能会根据不同的CPU 来定,还有就是多CPU 的情况。
#include<stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <pthread.h>
void Thread1()
{
sleep(1);
int i,j;
int policy;
struct sched_param param;
pthread_getschedparam(pthread_self(),&policy,¶m);
if(policy== SCHED_OTHER)
printf("SCHED_OTHER/n");
if(policy== SCHED_RR);
printf("SCHED_RR 1 /n");
if(policy==SCHED_FIFO)
printf("SCHED_FIFO/n");
for(i=1;i<10;i++)
{
for(j=1;j<5000000;j++)
{
}
printf("thread 1/n");
}
printf("Pthread 1 exit/n");
}
void Thread2()
{
sleep(1);
int i,j,m;
int policy;
struct sched_param param;
pthread_getschedparam(pthread_self(),&policy,¶m);
if(policy == SCHED_OTHER)
printf("SCHED_OTHER/n");
if(policy== SCHED_RR);
printf("SCHED_RR/n");
if(policy==SCHED_FIFO)
printf("SCHED_FIFO/n");
for(i=1;i<10;i++)
{
for(j=1;j<5000000;j++)
{
}
printf("thread 2/n");
}
printf("Pthread 2 exit/n");
}
void Thread3()
{
sleep(1);
int i,j;
int policy;
struct sched_param param;
pthread_getschedparam(pthread_self(),&policy,¶m);
if(policy == SCHED_OTHER)
printf("SCHED_OTHER/n");
if(policy== SCHED_RR)
printf("SCHED_RR /n");
if(policy==SCHED_FIFO)
printf("SCHED_FIFO/n");
for(i=1;i<10;i++)
{
for(j=1;j<5000000;j++)
{
}
printf("thread 3/n");
}
printf("Pthread 3 exit/n");
}
int main()
{
int i;
i = getuid();
if(i==0)
printf("The current user is root/n");
else
printf("The current user is not root/n");
pthread_t ppid1,ppid2,ppid3;
struct sched_param param;
pthread_attr_t attr,attr1,attr2;
pthread_attr_init(&attr1);
pthread_attr_init(&attr);
pthread_attr_init(&attr2);
param.sched_priority= 51;
pthread_attr_setschedpolicy(&attr2,SCHED_RR);
pthread_attr_setschedparam(&attr2,¶m);
pthread_attr_setinheritsched(&attr2,PTHREAD_EXPLICIT_SCHED);//要使优先级其作用必须要有这句话
param.sched_priority = 21;
pthread_attr_setschedpolicy(&attr1,SCHED_RR);
pthread_attr_setschedparam(&attr1,¶m);
pthread_attr_setinheritsched(&attr1,PTHREAD_EXPLICIT_SCHED);
pthread_create(&ppid3,&attr,(void*)Thread3,NULL);
pthread_create(&ppid2,&attr1,(void*)Thread2,NULL);
pthread_create(&ppid1,&attr2,(void*)Thread1,NULL);
pthread_join(ppid3,NULL);
pthread_join(ppid2,NULL);
pthread_join(ppid1,NULL);
pthread_attr_destroy(&attr2);
pthread_attr_destroy(&attr1);
return 0;
}
下面是该程序的其中之一的运行结果:
sudo ./prio_test
The current user is root
SCHED_OTHER
SCHED_RR
SCHED_RR 1
thread 1
thread 1
thread 1
thread 1
thread 1
thread 1
thread 1
thread 1
thread 1
Pthread 1 exit
thread 2
thread 2
thread 2
thread 2
thread 2
thread 2
thread 2
thread 2
thread 2
Pthread 2 exit
thread 3
thread 3
thread 3
thread 3
thread 3
thread 3
thread 3
thread 3
thread 3
Pthread 3 exit
这里我们可以看到,由于线程3的调度策略是SCHED_OTHER,而线程2的调度策略是SCHED_RR,所以,在Thread3中,线程3被线程1,线程2给抢占了。由于线程1的优先级大于线程2的优先级,所以,在线程1以先于线程2运行,不过,这里线程2有一部分代码还是先于线程1运行了。
我原以为,只要线程的优先级高,就会一定先运行,其实,这样的理解是片面的,特别是在SMP的PC机上更会增加其不确定性。
其实,普通进程的调度,是CPU根据进程优先级算出时间片,这样并不能一定保证高优先级的进程一定先运行,只不过和优先级低的进程相比,通常优先级较高的进程获得的CPU时间片会更长而已。其实,如果要想保证一个线程运行完在运行另一个线程的话,就要使用多线程的同步技术,信号量,条件变量等方法。而不是绝对依靠优先级的高低,来保证。
不过,从运行的结果上,我们可以看到,调度策略为SCHED_RR的线程1,线程2确实抢占了调度策略为SCHED_OTHER的线程3。这个是可以理解的,由于SCHER_RR是实时调度策略。
只有在下述事件之一发生时,实时进程才会被另外一个进程取代。
(1) 进程被另外一个具有更高实时优先级的实时进程抢占。
(2) 进程执行了阻塞操作并进入睡眠
(3)进程停止(处于TASK_STOPPED 或TASK_TRACED状态)或被杀死。
(4)进程通过调用系统调用sched_yield(),自愿放弃CPU 。
(5)进程基于时间片轮转的实时进程(SCHED_RR),而且用完了它的时间片。
基于时间片轮转的实时进程是,不是真正的改变进程的优先级,而是改变进程的基本时间片的长度。所以基于时间片轮转的进程调度,并不能保证高优先级的进程先运行。
下面是另一种运行结果:
sudo ./prio_test
The current user is root
SCHED_OTHER
SCHED_RR 1
thread 1
thread 1
thread 1
thread 1
thread 1
thread 1
thread 1
thread 1
thread 1
Pthread 1 exit
SCHED_RR
thread 2
thread 2
thread 2
thread 2
thread 2
thread 2
thread 2
thread 2
thread 2
Pthread 2 exit
thread 3
thread 3
thread 3
thread 3
thread 3
thread 3
thread 3
thread 3
thread 3
Pthread 3 exit
可以看出并没有每一次都保证高优先级的线程先运行。
- Linux下线程的调度策略与优先级(二)
- Linux下线程的调度策略与优先级(二)
- Linux下线程的调度策略与优先级(二)
- Linux下线程的调度策略与优先级(一)
- Linux下线程的调度策略与优先级(一)
- Linux下线程的调度策略与优先级(一)
- Linux下线程的调度策略与优先级(一)
- Linux线程调度策略与优先级(二)
- Linux线程调度策略与优先级(二)
- Linux下线程的调度策略与优先级
- Linux下线程的调度策略与优先级
- Linux下线程的调度策略与优先级
- Linux下线程的调度策略与优先级(二) http://blog.csdn.net/dongliqiang2006/article/details/5837828
- linux下默认的线程调度策略及优先级
- Linux线程调度策略与优先级
- Linux下线程的调度策略与优先级(一) http://blog.csdn.net/dongliqiang2006/article/details/5837824
- linux下线程优先级(属性) (当前线程的调度策略(是否允许设置优先级)。允许的最大优先级,最小优先级。如何设定优先级)
- Linux调度策略及线程优先级设置
- 安裝PADS9.3破解方法
- JNI使用
- mfc调用控制台
- Nuke光剑插件(WIP)
- 100个Java经典例子(1-10)初学者的利器高手的宝典JavaSE
- Linux下线程的调度策略与优先级(二)
- statspack性能报告!
- Java源代码格式化
- VB - 数据文件(二)随机文件及文件基本操作
- 88服务器搭建
- android WIFI检测与设置
- 100个Java经典例子(11-20)初学者的利器高手的宝典JavaSE
- 音频界YouTube ——SoundCloud发布HTML 5部件
- Android 调用系统地图(Google Map)并显示具体方位