C语言函数大全（2）
来源：互联网 发布：杭州电魂网络怎么样 编辑：程序博客网 时间：2024/05/16 02:03
F：
函数名: fabs
功 能: 返回浮点数的绝对值
用 法: double fabs(double x);
程序例:
#include <stdio.h>
#include <math.h>
int main(void)
{
float number = -1234.0;
printf("number: %f absolute value: %f/n",
number, fabs(number));
return 0;
}
函数名: farcalloc
功 能: 从远堆栈中申请空间
用 法: void far *farcalloc(unsigned long units, unsigned ling unitsz);
程序例:
#include <stdio.h>
#include <alloc.h>
#include <string.h>
#include <dos.h>
int main(void)
{
char far *fptr;
char *str = "Hello";
/* allocate memory for the far pointer */
fptr = farcalloc(10, sizeof(char));
/* copy "Hello" into allocated memory */
/*
Note: movedata is used because you
might be in a small data model, in
which case a normal string copy routine
can not be used since it assumes the
pointer size is near.
*/
movedata(FP_SEG(str), FP_OFF(str),
FP_SEG(fptr), FP_OFF(fptr),
strlen(str));
/* display string (note the F modifier) */
printf("Far string is: %Fs/n", fptr);
/* free the memory */
farfree(fptr);
return 0;
}
函数名: farcoreleft
功 能: 返回远堆中未作用存储区大小
用 法: long farcoreleft(void);
程序例:
#include <stdio.h>
#include <alloc.h>
int main(void)
{
printf("The difference between the/
highest allocated block in the/
far/n");
printf("heap and the top of the far heap/
is: %lu bytes/n", farcoreleft());
return 0;
}
函数名: farfree
功 能: 从远堆中释放一块
用 法: void farfree(void);
程序例:
#include <stdio.h>
#include <alloc.h>
#include <string.h>
#include <dos.h>
int main(void)
{
char far *fptr;
char *str = "Hello";
/* allocate memory for the far pointer */
fptr = farcalloc(10, sizeof(char));
/* copy "Hello" into allocated memory */
/*
Note: movedata is used because you might be in a small data model,
in which case a normal string copy routine can't be used since it
assumes the pointer size is near.
*/
movedata(FP_SEG(str), FP_OFF(str),
FP_SEG(fptr), FP_OFF(fptr),
strlen(str));
/* display string (note the F modifier) */
printf("Far string is: %Fs/n", fptr);
/* free the memory */
farfree(fptr);
return 0;
}
函数名: farmalloc
功 能: 从远堆中分配存储块
用 法: void far *farmalloc(unsigned long size);
程序例:
#include <stdio.h>
#include <alloc.h>
#include <string.h>
#include <dos.h>
int main(void)
{
char far *fptr;
char *str = "Hello";
/* allocate memory for the far pointer */
fptr = farmalloc(10);
/* copy "Hello" into allocated memory */
/*
Note: movedata is used because we might
be in a small data model, in which case
a normal string copy routine can not be
used since it assumes the pointer size
is near.
*/
movedata(FP_SEG(str), FP_OFF(str),
FP_SEG(fptr), FP_OFF(fptr),
strlen(str));
/* display string (note the F modifier) */
printf("Far string is: %Fs/n", fptr);
/* free the memory */
farfree(fptr);
return 0;
}
函数名: farrealloc
功 能: 调整远堆中的分配块
用 法: void far *farrealloc(void far *block, unsigned long newsize);
程序例:
#include <stdio.h>
#include <alloc.h>
int main(void)
{
char far *fptr;
fptr = farmalloc(10);
printf("First address: %Fp/n", fptr);
fptr = farrealloc(fptr,20);
printf("New address : %Fp/n", fptr);
farfree(fptr);
return 0;
}
函数名: fclose
功 能: 关闭一个流
用 法: int fclose(FILE *stream);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
FILE *fp;
char buf[11] = "0123456789";
/* create a file containing 10 bytes */
fp = fopen("DUMMY.FIL", "w");
fwrite(&buf, strlen(buf), 1, fp);
/* close the file */
fclose(fp);
return 0;
}
函数名: fcloseall
功 能: 关闭打开流
用 法: int fcloseall(void);
程序例:
#include <stdio.h>
int main(void)
{
int streams_closed;
/* open two streams */
fopen("DUMMY.ONE", "w");
fopen("DUMMY.TWO", "w");
/* close the open streams */
streams_closed = fcloseall();
if (streams_closed == EOF)
/* issue an error message */
perror("Error");
else
/* print result of fcloseall() function */
printf("%d streams were closed./n", streams_closed);
return 0;
}
函数名: fcvt
功 能: 把一个浮点数转换为字符串
用 法: char *fcvt(double value, int ndigit, int *decpt, int *sign);
程序例:
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
char *string;
double value;
int dec, sign;
int ndig = 10;
clrscr();
value = 9.876;
string = ecvt(value, ndig, &dec, &sign);
printf("string = %s dec = %d /
sign = %d/n", string, dec, sign);
value = -123.45;
ndig= 15;
string = ecvt(value,ndig,&dec,&sign);
printf("string = %s dec = %d sign = %d/n",
string, dec, sign);
value = 0.6789e5; /* scientific
notation */
ndig = 5;
string = ecvt(value,ndig,&dec,&sign);
printf("string = %s dec = %d/
sign = %d/n", string, dec, sign);
return 0;
}
函数名: fdopen
功 能: 把流与一个文件句柄相接
用 法: FILE *fdopen(int handle, char *type);
程序例:
#include <sys/stat.h>
#include <stdio.h>
#include <fcntl.h>
#include <io.h>
int main(void)
{
int handle;
FILE *stream;
/* open a file */
handle = open("DUMMY.FIL", O_CREAT,
S_IREAD | S_IWRITE);
/* now turn the handle into a stream */
stream = fdopen(handle, "w");
if (stream == NULL)
printf("fdopen failed/n");
else
{
fprintf(stream, "Hello world/n");
fclose(stream);
}
return 0;
}
函数名: feof
功 能: 检测流上的文件结束符
用 法: int feof(FILE *stream);
程序例:
#include <stdio.h>
int main(void)
{
FILE *stream;
/* open a file for reading */
stream = fopen("DUMMY.FIL", "r");
/* read a character from the file */
fgetc(stream);
/* check for EOF */
if (feof(stream))
printf("We have reached end-of-file/n");
/* close the file */
fclose(stream);
return 0;
}
函数名: ferror
功 能: 检测流上的错误
用 法: int ferror(FILE *stream);
程序例:
#include <stdio.h>
int main(void)
{
FILE *stream;
/* open a file for writing */
stream = fopen("DUMMY.FIL", "w");
/* force an error condition by attempting to read */
(void) getc(stream);
if (ferror(stream)) /* test for an error on the stream */
{
/* display an error message */
printf("Error reading from DUMMY.FIL/n");
/* reset the error and EOF indicators */
clearerr(stream);
}
fclose(stream);
return 0;
}
函数名: fflush
功 能: 清除一个流
用 法: int fflush(FILE *stream);
程序例:
#include <string.h>
#include <stdio.h>
#include <conio.h>
#include <io.h>
void flush(FILE *stream);
int main(void)
{
FILE *stream;
char msg[] = "This is a test";
/* create a file */
stream = fopen("DUMMY.FIL", "w");
/* write some data to the file */
fwrite(msg, strlen(msg), 1, stream);
clrscr();
printf("Press any key to flush/
DUMMY.FIL:");
getch();
/* flush the data to DUMMY.FIL without/
closing it */
flush(stream);
printf("/nFile was flushed, Press any key/
to quit:");
getch();
return 0;
}
void flush(FILE *stream)
{
int duphandle;
/* flush the stream's internal buffer */
fflush(stream);
/* make a duplicate file handle */
duphandle = dup(fileno(stream));
/* close the duplicate handle to flush/
the DOS buffer */
close(duphandle);
}
函数名: fgetc
功 能: 从流中读取字符
用 法: int fgetc(FILE *stream);
程序例:
#include <string.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
FILE *stream;
char string[] = "This is a test";
char ch;
/* open a file for update */
stream = fopen("DUMMY.FIL", "w+");
/* write a string into the file */
fwrite(string, strlen(string), 1, stream);
/* seek to the beginning of the file */
fseek(stream, 0, SEEK_SET);
do
{
/* read a char from the file */
ch = fgetc(stream);
/* display the character */
putch(ch);
} while (ch != EOF);
fclose(stream);
return 0;
}
函数名: fgetchar
功 能: 从流中读取字符
用 法: int fgetchar(void);
程序例:
#include <stdio.h>
int main(void)
{
char ch;
/* prompt the user for input */
printf("Enter a character followed by /
<Enter>: ");
/* read the character from stdin */
ch = fgetchar();
/* display what was read */
printf("The character read is: '%c'/n",
ch);
return 0;
}
函数名: fgetpos
功 能: 取得当前文件的句柄
用 法: int fgetpos(FILE *stream);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
FILE *stream;
char string[] = "This is a test";
fpos_t filepos;
/* open a file for update */
stream = fopen("DUMMY.FIL", "w+");
/* write a string into the file */
fwrite(string, strlen(string), 1, stream);
/* report the file pointer position */
fgetpos(stream, &filepos);
printf("The file pointer is at byte/
%ld/n", filepos);
fclose(stream);
return 0;
}
函数名: fgets
功 能: 从流中读取一字符串
用 法: char *fgets(char *string, int n, FILE *stream);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
FILE *stream;
char string[] = "This is a test";
char msg[20];
/* open a file for update */
stream = fopen("DUMMY.FIL", "w+");
/* write a string into the file */
fwrite(string, strlen(string), 1, stream);
/* seek to the start of the file */
fseek(stream, 0, SEEK_SET);
/* read a string from the file */
fgets(msg, strlen(string)+1, stream);
/* display the string */
printf("%s", msg);
fclose(stream);
return 0;
}
函数名: filelength
功 能: 取文件长度字节数
用 法: long filelength(int handle);
程序例:
#include <string.h>
#include <stdio.h>
#include <fcntl.h>
#include <io.h>
int main(void)
{
int handle;
char buf[11] = "0123456789";
/* create a file containing 10 bytes */
handle = open("DUMMY.FIL", O_CREAT);
write(handle, buf, strlen(buf));
/* display the size of the file */
printf("file length in bytes: %ld/n",
filelength(handle));
/* close the file */
close(handle);
return 0;
}
函数名: fillellipse
功 能: 画出并填充一椭圆
用 法: void far fillellipse(int x, int y, int xradius, int yradius);
程序例:
#include <graphics.h>
#include <conio.h>
int main(void)
{
int gdriver = DETECT, gmode;
int xcenter, ycenter, i;
initgraph(&gdriver,&gmode,"");
xcenter = getmaxx() / 2;
ycenter = getmaxy() / 2;
for (i=0; i<13; i++)
{
setfillstyle(i,WHITE);
fillellipse(xcenter,ycenter,100,50);
getch();
}
closegraph();
return 0;
}
函数名: fillpoly
功 能: 画并填充一个多边形
用 法: void far fillpoly(int numpoints, int far *polypoints);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int i, maxx, maxy;
/* our polygon array */
int poly[8];
/* initialize graphics, local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk)
/* an error occurred */
{
printf("Graphics error: %s/n",
grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1);
/* terminate with an error code */
}
maxx = getmaxx();
maxy = getmaxy();
poly[0] = 20; /* 1st vertext */
poly[1] = maxy / 2;
poly[2] = maxx - 20; /* 2nd */
poly[3] = 20;
poly[4] = maxx - 50; /* 3rd */
poly[5] = maxy - 20;
/*
4th vertex. fillpoly automatically
closes the polygon.
*/
poly[6] = maxx / 2;
poly[7] = maxy / 2;
/* loop through the fill patterns */
for (i=EMPTY_FILL; i<USER_FILL; i++)
{
/* set fill pattern */
setfillstyle(i, getmaxcolor());
/* draw a filled polygon */
fillpoly(4, poly);
getch();
}
/* clean up */
closegraph();
return 0;
}
函数名: findfirst, findnext
功 能: 搜索磁盘目录; 取得下一个匹配的findfirst模式的文件
用 法: int findfirst(char *pathname, struct ffblk *ffblk, int attrib);
int findnext(struct ffblk *ffblk);
程序例:
/* findnext example */
#include <stdio.h>
#include <dir.h>
int main(void)
{
struct ffblk ffblk;
int done;
printf("Directory listing of *.*/n");
done = findfirst("*.*",&ffblk,0);
while (!done)
{
printf(" %s/n", ffblk.ff_name);
done = findnext(&ffblk);
}
return 0;
}
函数名: floodfill
功 能: 填充一个有界区域
用 法: void far floodfill(int x, int y, int border);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int maxx, maxy;
/* initialize graphics, local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk)
/* an error occurred */
{
printf("Graphics error: %s/n",
grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1);
/* terminate with an error code */
}
maxx = getmaxx();
maxy = getmaxy();
/* select drawing color */
setcolor(getmaxcolor());
/* select fill color */
setfillstyle(SOLID_FILL, getmaxcolor());
/* draw a border around the screen */
rectangle(0, 0, maxx, maxy);
/* draw some circles */
circle(maxx / 3, maxy /2, 50);
circle(maxx / 2, 20, 100);
circle(maxx-20, maxy-50, 75);
circle(20, maxy-20, 25);
/* wait for a key */
getch();
/* fill in bounded region */
floodfill(2, 2, getmaxcolor());
/* clean up */
getch();
closegraph();
return 0;
}
函数名: floor
功 能: 向下舍入
用 法: double floor(double x);
程序例:
#include <stdio.h>
#include <math.h>
int main(void)
{
double number = 123.54;
double down, up;
down = floor(number);
up = ceil(number);
printf("original number %10.2lf/n",
number);
printf("number rounded down %10.2lf/n",
down);
printf("number rounded up %10.2lf/n",
up);
return 0;
}
函数名: flushall
功 能: 清除所有缓冲区
用 法: int flushall(void);
程序例:
#include <stdio.h>
int main(void)
{
FILE *stream;
/* create a file */
stream = fopen("DUMMY.FIL", "w");
/* flush all open streams */
printf("%d streams were flushed./n",
flushall());
/* close the file */
fclose(stream);
return 0;
}
函数名: fmod
功 能: 计算x对y的模, 即x/y的余数
用 法: double fmod(double x, double y);
程序例:
#include <stdio.h>
#include <math.h>
int main(void)
{
double x = 5.0, y = 2.0;
double result;
result = fmod(x,y);
printf("The remainder of (%lf / %lf) is /
%lf/n", x, y, result);
return 0;
}
函数名: fnmerge
功 能: 建立新文件名
用 法: void fnerge(char *path, char *drive, char *dir);
程序例:
#include <string.h>
#include <stdio.h>
#include <dir.h>
int main(void)
{
char s[MAXPATH];
char drive[MAXDRIVE];
char dir[MAXDIR];
char file[MAXFILE];
char ext[MAXEXT];
getcwd(s,MAXPATH); /* get the current working directory */
strcat(s,"//"); /* append on a trailing / character */
fnsplit(s,drive,dir,file,ext); /* split the string to separate elems */
strcpy(file,"DATA");
strcpy(ext,".TXT");
fnmerge(s,drive,dir,file,ext); /* merge everything into one string */
puts(s); /* display resulting string */
return 0;
}
函数名: fopen
功 能: 打开一个流
用 法: FILE *fopen(char *filename, char *type);
程序例:
#include <stdlib.h>
#include <stdio.h>
#include <dir.h>
int main(void)
{
char *s;
char drive[MAXDRIVE];
char dir[MAXDIR];
char file[MAXFILE];
char ext[MAXEXT];
int flags;
s=getenv("COMSPEC"); /* get the comspec environment parameter */
flags=fnsplit(s,drive,dir,file,ext);
printf("Command processor info:/n");
if(flags & DRIVE)
printf("/tdrive: %s/n",drive);
if(flags & DIRECTORY)
printf("/tdirectory: %s/n",dir);
if(flags & FILENAME)
printf("/tfile: %s/n",file);
if(flags & EXTENSION)
printf("/textension: %s/n",ext);
return 0;
}
函数名: fprintf
功 能: 传送格式化输出到一个流中
用 法: int fprintf(FILE *stream, char *format[, argument,...]);
程序例:
/* Program to create backup of the
AUTOEXEC.BAT file */
#include <stdio.h>
int main(void)
{
FILE *in, *out;
if ((in = fopen("//AUTOEXEC.BAT", "rt"))
== NULL)
{
fprintf(stderr, "Cannot open input /
file./n");
return 1;
}
if ((out = fopen("//AUTOEXEC.BAK", "wt"))
== NULL)
{
fprintf(stderr, "Cannot open output /
file./n");
return 1;
}
while (!feof(in))
fputc(fgetc(in), out);
fclose(in);
fclose(out);
return 0;
}
函数名: FP_OFF
功 能: 获取远地址偏移量
用 法: unsigned FP_OFF(void far *farptr);
程序例:
/* FP_OFF */
#include <dos.h>
#include <stdio.h>
int main(void)
{
char *str = "fpoff.c";
printf("The offset of this file in memory/
is: %Fp/n", FP_OFF(str));
return 0;
}
函数名: FP_SEG
功 能: 获取远地址段值
用 法: unsigned FP_SEG(void far *farptr);
程序例:
/* FP_SEG */
#include <dos.h>
#include <stdio.h>
int main(void)
{
char *filename = "fpseg.c";
printf("The offset of this file in memory/
is: %Fp/n", FP_SEG(filename));
return(0);
}
函数名: fputc
功 能: 送一个字符到一个流中
用 法: int fputc(int ch, FILE *stream);
程序例:
#include <stdio.h>
int main(void)
{
char msg[] = "Hello world";
int i = 0;
while (msg[i])
{
fputc(msg[i], stdout);
i++;
}
return 0;
}
函数名: fputchar
功 能: 送一个字符到标准输出流(stdout)中
用 法: int fputchar(char ch);
程序例:
#include <stdio.h>
int main(void)
{
char msg[] = "This is a test";
int i = 0;
while (msg[i])
{
fputchar(msg[i]);
i++;
}
return 0;
}
函数名: fputs
功 能: 送一个字符到一个流中
用 法: int fputs(char *string, FILE *stream);
程序例:
#include <stdio.h>
int main(void)
{
/* write a string to standard output */
fputs("Hello world/n", stdout);
return 0;
}
函数名: fread
功 能: 从一个流中读数据
用 法: int fread(void *ptr, int size, int nitems, FILE *stream);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
FILE *stream;
char msg[] = "this is a test";
char buf[20];
if ((stream = fopen("DUMMY.FIL", "w+"))
== NULL)
{
fprintf(stderr,
"Cannot open output file./n");
return 1;
}
/* write some data to the file */
fwrite(msg, strlen(msg)+1, 1, stream);
/* seek to the beginning of the file */
fseek(stream, SEEK_SET, 0);
/* read the data and display it */
fread(buf, strlen(msg)+1, 1, stream);
printf("%s/n", buf);
fclose(stream);
return 0;
}
函数名: free
功 能: 释放已分配的块
用 法: void free(void *ptr);
程序例:
#include <string.h>
#include <stdio.h>
#include <alloc.h>
int main(void)
{
char *str;
/* allocate memory for string */
str = malloc(10);
/* copy "Hello" to string */
strcpy(str, "Hello");
/* display string */
printf("String is %s/n", str);
/* free memory */
free(str);
return 0;
}
函数名: freemem
功 能: 释放先前分配的DOS内存块
用 法: int freemem(unsigned seg);
程序例:
#include <dos.h>
#include <alloc.h>
#include <stdio.h>
int main(void)
{
unsigned int size, segp;
int stat;
size = 64; /* (64 x 16) = 1024 bytes */
stat = allocmem(size, &segp);
if (stat < 0)
printf("Allocated memory at segment:/
%x/n", segp);
else
printf("Failed: maximum number of/
paragraphs available is %u/n",
stat);
freemem(segp);
return 0;
}
函数名: freopen
功 能: 替换一个流
用 法: FILE *freopen(char *filename, char *type, FILE *stream);
程序例:
#include <stdio.h>
int main(void)
{
/* redirect standard output to a file */
if (freopen("OUTPUT.FIL", "w", stdout)
== NULL)
fprintf(stderr, "error redirecting/
stdout/n");
/* this output will go to a file */
printf("This will go into a file.");
/* close the standard output stream */
fclose(stdout);
return 0;
}
函数名: frexp
功 能: 把一个双精度数分解为尾数的指数
用 法: double frexp(double value, int *eptr);
程序例:
#include <math.h>
#include <stdio.h>
int main(void)
{
double mantissa, number;
int exponent;
number = 8.0;
mantissa = frexp(number, &exponent);
printf("The number %lf is ", number);
printf("%lf times two to the ", mantissa);
printf("power of %d/n", exponent);
return 0;
}
函数名: fscanf
功 能: 从一个流中执行格式化输入
用 法: int fscanf(FILE *stream, char *format[,argument...]);
程序例:
#include <stdlib.h>
#include <stdio.h>
int main(void)
{
int i;
printf("Input an integer: ");
/* read an integer from the
standard input stream */
if (fscanf(stdin, "%d", &i))
printf("The integer read was: %i/n",
i);
else
{
fprintf(stderr, "Error reading an /
integer from stdin./n");
exit(1);
}
return 0;
}
函数名: fseek
功 能: 重定位流上的文件指针
用 法: int fseek(FILE *stream, long offset, int fromwhere);
程序例:
#include <stdio.h>
long filesize(FILE *stream);
int main(void)
{
FILE *stream;
stream = fopen("MYFILE.TXT", "w+");
fprintf(stream, "This is a test");
printf("Filesize of MYFILE.TXT is %ld bytes/n", filesize(stream));
fclose(stream);
return 0;
}
long filesize(FILE *stream)
{
long curpos, length;
curpos = ftell(stream);
fseek(stream, 0L, SEEK_END);
length = ftell(stream);
fseek(stream, curpos, SEEK_SET);
return length;
}
函数名: fsetpos
功 能: 定位流上的文件指针
用 法: int fsetpos(FILE *stream, const fpos_t *pos);
程序例:
#include <stdlib.h>
#include <stdio.h>
void showpos(FILE *stream);
int main(void)
{
FILE *stream;
fpos_t filepos;
/* open a file for update */
stream = fopen("DUMMY.FIL", "w+");
/* save the file pointer position */
fgetpos(stream, &filepos);
/* write some data to the file */
fprintf(stream, "This is a test");
/* show the current file position */
showpos(stream);
/* set a new file position, display it */
if (fsetpos(stream, &filepos) == 0)
showpos(stream);
else
{
fprintf(stderr, "Error setting file /
pointer./n");
exit(1);
}
/* close the file */
fclose(stream);
return 0;
}
void showpos(FILE *stream)
{
fpos_t pos;
/* display the current file pointer
position of a stream */
fgetpos(stream, &pos);
printf("File position: %ld/n", pos);
}
函数名: fstat
功 能: 获取打开文件信息
用 法: int fstat(char *handle, struct stat *buff);
程序例:
#include <sys/stat.h>
#include <stdio.h>
#include <time.h>
int main(void)
{
struct stat statbuf;
FILE *stream;
/* open a file for update */
if ((stream = fopen("DUMMY.FIL", "w+"))
== NULL)
{
fprintf(stderr, "Cannot open output /
file./n");
return(1);
}
fprintf(stream, "This is a test");
fflush(stream);
/* get information about the file */
fstat(fileno(stream), &statbuf);
fclose(stream);
/* display the information returned */
if (statbuf.st_mode & S_IFCHR)
printf("Handle refers to a device./n");
if (statbuf.st_mode & S_IFREG)
printf("Handle refers to an ordinary /
file./n");
if (statbuf.st_mode & S_IREAD)
printf("User has read permission on /
file./n");
if (statbuf.st_mode & S_IWRITE)
printf("User has write permission on /
file./n");
printf("Drive letter of file: %c/n",
'A'+statbuf.st_dev);
printf("Size of file in bytes: %ld/n",
statbuf.st_size);
printf("Time file last opened: %s/n",
ctime(&statbuf.st_ctime));
return 0;
}
函数名: ftell
功 能: 返回当前文件指针
用 法: long ftell(FILE *stream);
程序例:
#include <stdio.h>
int main(void)
{
FILE *stream;
stream = fopen("MYFILE.TXT", "w+");
fprintf(stream, "This is a test");
printf("The file pointer is at byte /
%ld/n", ftell(stream));
fclose(stream);
return 0;
}
函数名: fwrite
功 能: 写内容到流中
用 法: int fwrite(void *ptr, int size, int nitems, FILE *stream);
程序例:
#include <stdio.h>
struct mystruct
{
int i;
char ch;
};
int main(void)
{
FILE *stream;
struct mystruct s;
if ((stream = fopen("TEST.$$$", "wb")) == NULL) /* open file TEST.$$$ */
{
fprintf(stderr, "Cannot open output file./n");
return 1;
}
s.i = 0;
s.ch = 'A';
fwrite(&s, sizeof(s), 1, stream); /* write struct s to file */
fclose(stream); /* close file */
return 0;
}
G：
函数名: gcvt
功 能: 把浮点数转换成字符串
用 法: char *gcvt(double value, int ndigit, char *buf);
程序例:
#include <stdlib.h>
#include <stdio.h>
int main(void)
{
char str[25];
double num;
int sig = 5; /* significant digits */
/* a regular number */
num = 9.876;
gcvt(num, sig, str);
printf("string = %s/n", str);
/* a negative number */
num = -123.4567;
gcvt(num, sig, str);
printf("string = %s/n", str);
/* scientific notation */
num = 0.678e5;
gcvt(num, sig, str);
printf("string = %s/n", str);
return(0);
}
函数名: geninterrupt
功 能: 产生一个软中断
用 法: void geninterrupt(int intr_num);
程序例:
#include <conio.h>
#include <dos.h>
/* function prototype */
void writechar(char ch);
int main(void)
{
clrscr();
gotoxy(80,25);
writechar('*');
getch();
return 0;
}
/*
outputs a character at the current cursor
position using the video BIOS to avoid the
scrolling of the screen when writing to
location (80,25).
*/
void writechar(char ch)
{
struct text_info ti;
/* grab current text settings */
gettextinfo(&ti);
/* interrupt 0x10 sub-function 9 */
_AH = 9;
/* character to be output */
_AL = ch;
_BH = 0; /* video page */
_BL = ti.attribute; /* video attribute */
_CX = 1; /* repetition factor */
geninterrupt(0x10); /* output the char */
}
函数名: getarccoords
功 能: 取得最后一次调用arc的坐标
用 法: void far getarccoords(struct arccoordstype far *arccoords);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
struct arccoordstype arcinfo;
int midx, midy;
int stangle = 45, endangle = 270;
char sstr[80], estr[80];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
/* an error occurred */
if (errorcode != grOk)
{
printf("Graphics error: %s/n",
grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
/* terminate with an error code */
exit(1);
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* draw arc and get coordinates */
setcolor(getmaxcolor());
arc(midx, midy, stangle, endangle, 100);
getarccoords(&arcinfo);
/* convert arc information into strings */
sprintf(sstr, "*- (%d, %d)",
arcinfo.xstart, arcinfo.ystart);
sprintf(estr, "*- (%d, %d)",
arcinfo.xend, arcinfo.yend);
/* output the arc information */
outtextxy(arcinfo.xstart,
arcinfo.ystart, sstr);
outtextxy(arcinfo.xend,
arcinfo.yend, estr);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getaspectratio
功 能: 返回当前图形模式的纵横比
用 法: void far getaspectratio(int far *xasp, int far *yasp);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int xasp, yasp, midx, midy;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
/* an error occurred */
if (errorcode != grOk)
{
printf("Graphics error: %s/n",
grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
/* terminate with an error code */
exit(1);
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
setcolor(getmaxcolor());
/* get current aspect ratio settings */
getaspectratio(&xasp, &yasp);
/* draw normal circle */
circle(midx, midy, 100);
getch();
/* draw wide circle */
cleardevice();
setaspectratio(xasp/2, yasp);
circle(midx, midy, 100);
getch();
/* draw narrow circle */
cleardevice();
setaspectratio(xasp, yasp/2);
circle(midx, midy, 100);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getbkcolor
功 能: 返回当前背景颜色
用 法: int far getbkcolor(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int bkcolor, midx, midy;
char bkname[35];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
/* an error occurred */
if (errorcode != grOk)
{
printf("Graphics error: %s/n",
grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
/* terminate with an error code */
exit(1);
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
setcolor(getmaxcolor());
/* for centering text on the display */
settextjustify(CENTER_TEXT, CENTER_TEXT);
/* get the current background color */
bkcolor = getbkcolor();
/* convert color value into a string */
itoa(bkcolor, bkname, 10);
strcat(bkname,
" is the current background color.");
/* display a message */
outtextxy(midx, midy, bkname);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getc
功 能: 从流中取字符
用 法: int getc(FILE *stream);
程序例:
#include <stdio.h>
int main(void)
{
char ch;
printf("Input a character:");
/* read a character from the
standard input stream */
ch = getc(stdin);
printf("The character input was: '%c'/n",
ch);
return 0;
}
函数名: getcbrk
功 能: 获取Control_break设置
用 法: int getcbrk(void);
程序例:
#include <stdio.h>
#include <dos.h>
int main(void)
{
if (getcbrk())
printf("Cntrl-brk flag is on/n");
else
printf("Cntrl-brk flag is off/n");
return 0;
}
函数名: getch
功 能: 从控制台无回显地取一个字符
用 法: int getch(void);
程序例:
#include <stdio.h>
#include <conio.h>
int main(void)
{
char ch;
printf("Input a character:");
ch = getche();
printf("/nYou input a '%c'/n", ch);
return 0;
}
函数名: getchar
功 能: 从stdin流中读字符
用 法: int getchar(void);
程序例:
#include <stdio.h>
int main(void)
{
int c;
/* Note that getchar reads from stdin and
is line buffered; this means it will
not return until you press ENTER. */
while ((c = getchar()) != '/n')
printf("%c", c);
return 0;
}
函数名: getche
功 能: 从控制台取字符(带回显)
用 法: int getche(void);
程序例:
#include <stdio.h>
#include <conio.h>
int main(void)
{
char ch;
printf("Input a character:");
ch = getche();
printf("/nYou input a '%c'/n", ch);
return 0;
}
函数名: getcolor
功 能: 返回当前画线颜色
用 法: int far getcolor(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int color, midx, midy;
char colname[35];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
/* an error occurred */
if (errorcode != grOk)
{
printf("Graphics error: %s/n",
grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
/* terminate with an error code */
exit(1);
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
setcolor(getmaxcolor());
/* for centering text on the display */
settextjustify(CENTER_TEXT, CENTER_TEXT);
/* get the current drawing color */
color = getcolor();
/* convert color value into a string */
itoa(color, colname, 10);
strcat(colname,
" is the current drawing color.");
/* display a message */
outtextxy(midx, midy, colname);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getcurdir
功 能: 取指定驱动器的当前目录
用 法: int getcurdir(int drive, char *direc);
程序例:
#include <dir.h>
#include <stdio.h>
#include <string.h>
char *current_directory(char *path)
{
strcpy(path, "X://"); /* fill string with form of response: X:/ */
path[0] = 'A' + getdisk(); /* replace X with current drive letter */
getcurdir(0, path+3); /* fill rest of string with current directory */
return(path);
}
int main(void)
{
char curdir[MAXPATH];
current_directory(curdir);
printf("The current directory is %s/n", curdir);
return 0;
}
函数名: getcwd
功 能: 取当前工作目录
用 法: char *getcwd(char *buf, int n);
程序例:
#include <stdio.h>
#include <dir.h>
int main(void)
{
char buffer[MAXPATH];
getcwd(buffer, MAXPATH);
printf("The current directory is: %s/n", buffer);
return 0;
}
函数名: getdate
功 能: 取DOS日期
用 法: void getdate(struct *dateblk);
程序例:
#include <dos.h>
#include <stdio.h>
int main(void)
{
struct date d;
getdate(&d);
printf("The current year is: %d/n",
d.da_year);
printf("The current day is: %d/n",
d.da_day);
printf("The current month is: %d/n",
d.da_mon);
return 0;
}
函数名: getdefaultpalette
功 能: 返回调色板定义结构
用 法: struct palettetype *far getdefaultpalette(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int i;
/* structure for returning palette copy */
struct palettetype far *pal=(void *) 0;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
/* an error occurred */
if (errorcode != grOk)
{
printf("Graphics error: %s/n",
grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
/* terminate with an error code */
exit(1);
}
setcolor(getmaxcolor());
/* return a pointer to the default palette */
pal = getdefaultpalette();
for (i=0; i<16; i++)
{
printf("colors[%d] = %d/n", i,
pal->colors[i]);
getch();
}
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getdisk
功 能: 取当前磁盘驱动器号
用 法: int getdisk(void);
程序例:
#include <stdio.h>
#include <dir.h>
int main(void)
{
int disk;
disk = getdisk() + 'A';
printf("The current drive is: %c/n",
disk);
return 0;
}
函数名: getdrivername
功 能: 返回指向包含当前图形驱动程序名字的字符串指针
用 法: char *getdrivename(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
/* stores the device driver name */
char *drivername;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
/* an error occurred */
if (errorcode != grOk)
{
printf("Graphics error: %s/n",
grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
/* terminate with an error code */
exit(1);
}
setcolor(getmaxcolor());
/* get name of the device driver in use */
drivername = getdrivername();
/* for centering text on the screen */
settextjustify(CENTER_TEXT, CENTER_TEXT);
/* output the name of the driver */
outtextxy(getmaxx() / 2, getmaxy() / 2,
drivername);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getdta
功 能: 取磁盘传输地址
用 法: char far *getdta(void);
程序例:
#include <dos.h>
#include <stdio.h>
int main(void)
{
char far *dta;
dta = getdta();
printf("The current disk transfer /
address is: %Fp/n", dta);
return 0;
}
函数名: getenv
功 能: 从环境中取字符串
用 法: char *getenv(char *envvar);
程序例:
#include <stdlib.h>
#include <stdio.h>
int main(void)
{
char *s;
s=getenv("COMSPEC"); /* get the comspec environment parameter */
printf("Command processor: %s/n",s); /* display comspec parameter */
return 0;
}
函数名: getfat, getfatd
功 能: 取文件分配表信息
用 法: void getfat(int drive, struct fatinfo *fatblkp);
程序例:
#include <stdio.h>
#include <dos.h>
int main(void)
{
struct fatinfo diskinfo;
int flag = 0;
printf("Please insert disk in drive A/n");
getchar();
getfat(1, &diskinfo);
/* get drive information */
printf("/nDrive A: is ");
switch((unsigned char) diskinfo.fi_fatid)
{
case 0xFD:
printf("360K low density/n");
break;
case 0xF9:
printf("1.2 Meg high density/n");
break;
default:
printf("unformatted/n");
flag = 1;
}
if (!flag)
{
printf(" sectors per cluster %5d/n",
diskinfo.fi_sclus);
printf(" number of clusters %5d/n",
diskinfo.fi_nclus);
printf(" bytes per sector %5d/n",
diskinfo.fi_bysec);
}
return 0;
}
函数名: getfillpattern
功 能: 将用户定义的填充模式拷贝到内存中
用 法: void far getfillpattern(char far *upattern);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int maxx, maxy;
char pattern[8] = {0x00, 0x70, 0x20, 0x27, 0x25, 0x27, 0x04, 0x04};
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
maxx = getmaxx();
maxy = getmaxy();
setcolor(getmaxcolor());
/* select a user defined fill pattern */
setfillpattern(pattern, getmaxcolor());
/* fill the screen with the pattern */
bar(0, 0, maxx, maxy);
getch();
/* get the current user defined fill pattern */
getfillpattern(pattern);
/* alter the pattern we grabbed */
pattern[4] -= 1;
pattern[5] -= 3;
pattern[6] += 3;
pattern[7] -= 4;
/* select our new pattern */
setfillpattern(pattern, getmaxcolor());
/* fill the screen with the new pattern */
bar(0, 0, maxx, maxy);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getfillsettings
功 能: 取得有关当前填充模式和填充颜色的信息
用 法: void far getfillsettings(struct fillsettingstype far *fillinfo);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
/ the names of the fill styles supported */
char *fname[] = { "EMPTY_FILL",
"SOLID_FILL",
"LINE_FILL",
"LTSLASH_FILL",
"SLASH_FILL",
"BKSLASH_FILL",
"LTBKSLASH_FILL",
"HATCH_FILL",
"XHATCH_FILL",
"INTERLEAVE_FILL",
"WIDE_DOT_FILL",
"CLOSE_DOT_FILL",
"USER_FILL"
};
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
struct fillsettingstype fillinfo;
int midx, midy;
char patstr[40], colstr[40];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* get information about current fill pattern and color */
getfillsettings(&fillinfo);
/* convert fill information into strings */
sprintf(patstr, "%s is the fill style.", fname[fillinfo.pattern]);
sprintf(colstr, "%d is the fill color.", fillinfo.color);
/* display the information */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, patstr);
outtextxy(midx, midy+2*textheight("W"), colstr);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getftime
功 能: 取文件日期和时间
用 法: int getftime(int handle, struct ftime *ftimep);
程序例:
#include <stdio.h>
#include <io.h>
int main(void)
{
FILE *stream;
struct ftime ft;
if ((stream = fopen("TEST.$$$",
"wt")) == NULL)
{
fprintf(stderr,
"Cannot open output file./n");
return 1;
}
getftime(fileno(stream), &ft);
printf("File time: %u:%u:%u/n",
ft.ft_hour, ft.ft_min,
ft.ft_tsec * 2);
printf("File date: %u/%u/%u/n",
ft.ft_month, ft.ft_day,
ft.ft_year+1980);
fclose(stream);
return 0;
}
函数名: getgraphmode
功 能: 返回当前图形模式
用 法: int far getgraphmode(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy, mode;
char numname[80], modename[80];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
/* an error occurred */
if (errorcode != grOk)
{
printf("Graphics error: %s/n",
grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
/* terminate with an error code */
exit(1);
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* get mode number and name strings */
mode = getgraphmode();
sprintf(numname,
"%d is the current mode number.",
mode);
sprintf(modename,
"%s is the current graphics mode",
getmodename(mode));
/* display the information */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, numname);
outtextxy(midx, midy+2*textheight("W"),
modename);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getftime
功 能: 取文件日期和时间
用 法: int getftime(int handle, struct ftime *ftimep);
程序例:
#include <stdio.h>
#include <io.h>
int main(void)
{
FILE *stream;
struct ftime ft;
if ((stream = fopen("TEST.$$$",
"wt")) == NULL)
{
fprintf(stderr,
"Cannot open output file./n");
return 1;
}
getftime(fileno(stream), &ft);
printf("File time: %u:%u:%u/n",
ft.ft_hour, ft.ft_min,
ft.ft_tsec * 2);
printf("File date: %u/%u/%u/n",
ft.ft_month, ft.ft_day,
ft.ft_year+1980);
fclose(stream);
return 0;
}
函数名: getgraphmode
功 能: 返回当前图形模式
用 法: int far getgraphmode(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy, mode;
char numname[80], modename[80];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
/* an error occurred */
if (errorcode != grOk)
{
printf("Graphics error: %s/n",
grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
/* terminate with an error code */
exit(1);
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* get mode number and name strings */
mode = getgraphmode();
sprintf(numname,
"%d is the current mode number.",
mode);
sprintf(modename,
"%s is the current graphics mode",
getmodename(mode));
/* display the information */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, numname);
outtextxy(midx, midy+2*textheight("W"),
modename);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getimage
功 能: 将指定区域的一个位图存到主存中
用 法: void far getimage(int left, int top, int right, int bottom,
void far *bitmap);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
#include <alloc.h>
void save_screen(void far *buf[4]);
void restore_screen(void far *buf[4]);
int maxx, maxy;
int main(void)
{
int gdriver=DETECT, gmode, errorcode;
void far *ptr[4];
/* auto-detect the graphics driver and mode */
initgraph(&gdriver, &gmode, "");
errorcode = graphresult(); /* check for any errors */
if (errorcode != grOk)
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1);
}
maxx = getmaxx();
maxy = getmaxy();
/* draw an image on the screen */
rectangle(0, 0, maxx, maxy);
line(0, 0, maxx, maxy);
line(0, maxy, maxx, 0);
save_screen(ptr); /* save the current screen */
getch(); /* pause screen */
cleardevice(); /* clear screen */
restore_screen(ptr); /* restore the screen */
getch(); /* pause screen */
closegraph();
return 0;
}
void save_screen(void far *buf[4])
{
unsigned size;
int ystart=0, yend, yincr, block;
yincr = (maxy+1) / 4;
yend = yincr;
size = imagesize(0, ystart, maxx, yend); /* get byte size of image */
for (block=0; block<=3; block++)
{
if ((buf[block] = farmalloc(size)) == NULL)
{
closegraph();
printf("Error: not enough heap space in save_screen()./n");
exit(1);
}
getimage(0, ystart, maxx, yend, buf[block]);
ystart = yend + 1;
yend += yincr + 1;
}
}
void save_screen(void far *buf[4])
{
unsigned size;
int ystart=0, yend, yincr, block;
yincr = (maxy+1) / 4;
yend = yincr;
size = imagesize(0, ystart, maxx, yend); /* get byte size of image */
for (block=0; block<=3; block++)
{
if ((buf[block] = farmalloc(size)) == NULL)
{
closegraph();
printf("Error: not enough heap space in save_screen()./n");
exit(1);
}
getimage(0, ystart, maxx, yend, buf[block]);
ystart = yend + 1;
yend += yincr + 1;
}
}
void restore_screen(void far *buf[4])
{
int ystart=0, yend, yincr, block;
yincr = (maxy+1) / 4;
yend = yincr;
for (block=0; block<=3; block++)
{
putimage(0, ystart, buf[block], COPY_PUT);
farfree(buf[block]);
ystart = yend + 1;
yend += yincr + 1;
}
}
函数名: getlinesettings
功 能: 取当前线型、模式和宽度
用 法: void far getlinesettings(struct linesettingstype far *lininfo):
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
/* the names of the line styles supported */
char *lname[] = { "SOLID_LINE",
"DOTTED_LINE",
"CENTER_LINE",
"DASHED_LINE",
"USERBIT_LINE"
};
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
struct linesettingstype lineinfo;
int midx, midy;
char lstyle[80], lpattern[80], lwidth[80];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* get information about current line settings */
getlinesettings(&lineinfo);
/* convert line information into strings */
sprintf(lstyle, "%s is the line style.",
lname[lineinfo.linestyle]);
sprintf(lpattern, "0x%X is the user-defined line pattern.",
lineinfo.upattern);
sprintf(lwidth, "%d is the line thickness.",
lineinfo.thickness);
/* display the information */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, lstyle);
outtextxy(midx, midy+2*textheight("W"), lpattern);
outtextxy(midx, midy+4*textheight("W"), lwidth);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getmaxcolor
功 能: 返回可以传给函数setcolor的最大颜色值
用 法: int far getmaxcolor(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy;
char colstr[80];
/* initialize graphics and local variables
*/ initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* grab the color info. and convert it to a string */
sprintf(colstr, "This mode supports colors 0..%d", getmaxcolor());
/* display the information */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, colstr);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getmaxx
功 能: 返回屏幕的最大x坐标
用 法: int far getmaxx(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy;
char xrange[80], yrange[80];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* convert max resolution values into strings */
sprintf(xrange, "X values range from 0..%d", getmaxx());
sprintf(yrange, "Y values range from 0..%d", getmaxy());
/* display the information */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, xrange);
outtextxy(midx, midy+textheight("W"), yrange);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getmaxy
功 能: 返回屏幕的最大y坐标
用 法: int far getmaxy(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy;
char xrange[80], yrange[80];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* convert max resolution values into strings */
sprintf(xrange, "X values range from 0..%d", getmaxx());
sprintf(yrange, "Y values range from 0..%d", getmaxy());
/* display the information */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, xrange);
outtextxy(midx, midy+textheight("W"), yrange);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getmodename
功 能: 返回含有指定图形模式名的字符串指针
用 法: char *far getmodename(int mode_name);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request autodetection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy, mode;
char numname[80], modename[80];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* get mode number and name strings */
mode = getgraphmode();
sprintf(numname, "%d is the current mode number.", mode);
sprintf(modename, "%s is the current graphics mode.", getmodename(mode));
/* display the information */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, numname);
outtextxy(midx, midy+2*textheight("W"), modename);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getmoderange
功 能: 取给定图形驱动程序的模式范围
用 法: void far getmoderange(int graphdriver, int far *lomode,
int far *himode);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy;
int low, high;
char mrange[80];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* get the mode range for this driver */
getmoderange(gdriver, &low, &high);
/* convert mode range info. into strings */
sprintf(mrange, "This driver supports modes %d..%d", low, high);
/* display the information */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, mrange);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getpalette
功 能: 返回有关当前调色板的信息
用 法: void far getpalette(struct palettetype far *palette);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
struct palettetype pal;
char psize[80], pval[20];
int i, ht;
int y = 10;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
/* an error occurred */
if (errorcode != grOk)
{
printf("Graphics error: %s/n",
grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
/* terminate with an error code */
exit(1);
}
/* grab a copy of the palette */
getpalette(&pal);
/* convert palette info. into strings */
sprintf(psize, "The palette has %d /
modifiable entries.", pal.size);
/* display the information */
outtextxy(0, y, psize);
if (pal.size != 0)
{
ht = textheight("W");
y += 2*ht;
outtextxy(0, y, "Here are the current /
values:");
y += 2*ht;
for (i=0; i<pal.size; i++, y+=ht)
{
sprintf(pval,
"palette[%02d]: 0x%02X", i,
pal.colors[i]);
outtextxy(0, y, pval);
}
}
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getpass
功 能: 读一个口令
用 法: char *getpass(char *prompt);
程序例:
#include <conio.h>
int main(void)
{
char *password;
password = getpass("Input a password:");
cprintf("The password is: %s/r/n",
password);
return 0;
}
函数名: getpixel
功 能: 取得指定像素的颜色
用 法: int far getpixel(int x, int y);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
#include <dos.h>
#define PIXEL_COUNT 1000
#define DELAY_TIME 100 /* in milliseconds */
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int i, x, y, color, maxx, maxy,
maxcolor, seed;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
/* an error occurred */
if (errorcode != grOk)
{
printf("Graphics error: %s/n",
grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
/* terminate with an error code */
exit(1);
}
maxx = getmaxx() + 1;
maxy = getmaxy() + 1;
maxcolor = getmaxcolor() + 1;
while (!kbhit())
{
/* seed the random number generator */
seed = random(32767);
srand(seed);
for (i=0; i<PIXEL_COUNT; i++)
{
x = random(maxx);
y = random(maxy);
color = random(maxcolor);
putpixel(x, y, color);
}
delay(DELAY_TIME);
srand(seed);
for (i=0; i<PIXEL_COUNT; i++)
{
x = random(maxx);
y = random(maxy);
color = random(maxcolor);
if (color == getpixel匇? ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;h;(;);;; ;e;t;p;s;p;(;););;; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;e;s;e;t; ;t;o; ;s;e;g;m;e;n;t; ;o;f; ;t;h;e; ;P;S;P; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;i;n;e; ;i;s; ;l;o;c;a;t;e;d; ;a;t; ;o;f;f;s;e;t; ;0;x;8;1; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;t; ;o;f; ;P;S;P; ; ; ; ; ; ; ; ;
函数名: gets
功 能: 从流中取一字符串
用 法: char *gets(char *string);
程序例:
#include <stdio.h>
int main(void)
{
char string[80];
printf("Input a string:");
gets(string);
printf("The string input was: %s/n",
string);
return 0;
}
函数名: gettext
功 能: 将文本方式屏幕上的文本拷贝到存储区
用 法: int gettext(int left, int top, int right, int bottom, void *destin);
程序例:
#include <conio.h>
char buffer[4096];
int main(void)
{
int i;
clrscr();
for (i = 0; i <= 20; i++)
cprintf("Line #%d/r/n", i);
gettext(1, 1, 80, 25, buffer);
gotoxy(1, 25);
cprintf("Press any key to clear screen...");
getch();
clrscr();
gotoxy(1, 25);
cprintf("Press any key to restore screen...");
getch();
puttext(1, 1, 80, 25, buffer);
gotoxy(1, 25);
cprintf("Press any key to quit...");
getch();
return 0;
}
函数名: gettextinfo
功 能: 取得文本模式的显示信息
用 法: void gettextinfo(struct text_info *inforec);
程序例:
#include <conio.h>
int main(void)
{
struct text_info ti;
gettextinfo(&ti);
cprintf("window left %2d/r/n",ti.winleft);
cprintf("window top %2d/r/n",ti.wintop);
cprintf("window right %2d/r/n",ti.winright);
cprintf("window bottom %2d/r/n",ti.winbottom);
cprintf("attribute %2d/r/n",ti.attribute);
cprintf("normal attribute %2d/r/n",ti.normattr);
cprintf("current mode %2d/r/n",ti.currmode);
cprintf("screen height %2d/r/n",ti.screenheight);
cprintf("screen width %2d/r/n",ti.screenwidth);
cprintf("current x %2d/r/n",ti.curx);
cprintf("current y %2d/r/n",ti.cury);
return 0;
}
函数名: gettextsettings
功 能: 返回有关当前图形文本字体的信息
用 法: void far gettextsettings(struct textsettingstype far *textinfo);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
/* the names of the fonts supported */
char *font[] = { "DEFAULT_FONT",
"TRIPLEX_FONT",
"SMALL_FONT",
"SANS_SERIF_FONT",
"GOTHIC_FONT"
};
/* the names of the text directions supported */
char *dir[] = { "HORIZ_DIR", "VERT_DIR" };
/* horizontal text justifications supported */
char *hjust[] = { "LEFT_TEXT", "CENTER_TEXT", "RIGHT_TEXT" };
/* vertical text justifications supported */
char *vjust[] = { "BOTTOM_TEXT", "CENTER_TEXT", "TOP_TEXT" };
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
struct textsettingstype textinfo;
int midx, midy, ht;
char fontstr[80], dirstr[80], sizestr[80];
char hjuststr[80], vjuststr[80];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* get information about current text settings */
gettextsettings(&textinfo);
/* convert text information into strings */
sprintf(fontstr, "%s is the text style.", font[textinfo.font]);
sprintf(dirstr, "%s is the text direction.", dir[textinfo.direction]);
sprintf(sizestr, "%d is the text size.", textinfo.charsize);
sprintf(hjuststr, "%s is the horizontal justification.",
hjust[textinfo.horiz]);
sprintf(vjuststr, "%s is the vertical justification.",
vjust[textinfo.vert]);
/* display the information */
ht = textheight("W");
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, fontstr);
outtextxy(midx, midy+2*ht, dirstr);
outtextxy(midx, midy+4*ht, sizestr);
outtextxy(midx, midy+6*ht, hjuststr);
outtextxy(midx, midy+8*ht, vjuststr);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: gettime
功 能: 取得系统时间
用 法: void gettime(struct time *timep);
程序例:
#include <stdio.h>
#include <dos.h>
int main(void)
{
struct time t;
gettime(&t);
printf("The current time is: %2d:%02d:%02d.%02d/n",
t.ti_hour, t.ti_min, t.ti_sec, t.ti_hund);
return 0;
}
函数名: getvect
功 能: 取得中断向量入口
用 法: void interrupt(*getvect(int intr_num));
程序例:
#include <stdio.h>
#include <dos.h>
void interrupt get_out(); /* interrupt prototype */
void interrupt (*oldfunc)(); /* interrupt function pointer */
int looping = 1;
int main(void)
{
puts("Press <Shift><Prt Sc> to terminate");
/* save the old interrupt */
oldfunc = getvect(5);
/* install interrupt handler */
setvect(5,get_out);
/* do nothing */
while (looping);
/* restore to original interrupt routine */
setvect(5,oldfunc);
puts("Success");
return 0;
}
void interrupt get_out()
{
looping = 0; /* change global variable to get out of loop */
}
函数名: getverify
功 能: 返回DOS校验标志状态
用 法: int getverify(void);
程序例:
#include <stdio.h>
#include <dos.h>
int main(void)
{
if (getverify())
printf("DOS verify flag is on/n");
else
printf("DOS verify flag is off/n");
return 0;
}
函数名: getviewsetting
功 能: 返回有关当前视区的信息
用 法: void far getviewsettings(struct viewporttype far *viewport);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
char *clip[] = { "OFF", "ON" };
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
struct viewporttype viewinfo;
int midx, midy, ht;
char topstr[80], botstr[80], clipstr[80];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* get information about current viewport */
getviewsettings(&viewinfo);
/* convert text information into strings */
sprintf(topstr, "(%d, %d) is the upper left viewport corner.",
viewinfo.left, viewinfo.top);
sprintf(botstr, "(%d, %d) is the lower right viewport corner.",
viewinfo.right, viewinfo.bottom);
sprintf(clipstr, "Clipping is turned %s.", clip[viewinfo.clip]);
/* display the information */
settextjustify(CENTER_TEXT, CENTER_TEXT);
ht = textheight("W");
outtextxy(midx, midy, topstr);
outtextxy(midx, midy+2*ht, botstr);
outtextxy(midx, midy+4*ht, clipstr);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: getw
功 能: 从流中取一整数
用 法: int getw(FILE *strem);
程序例:
#include <stdio.h>
#include <stdlib.h>
#define FNAME "test.$$$"
int main(void)
{
FILE *fp;
int word;
/* place the word in a file */
fp = fopen(FNAME, "wb");
if (fp == NULL)
{
printf("Error opening file %s/n", FNAME);
exit(1);
}
word = 94;
putw(word,fp);
if (ferror(fp))
printf("Error writing to file/n");
else
printf("Successful write/n");
fclose(fp);
/* reopen the file */
fp = fopen(FNAME, "rb");
if (fp == NULL)
{
printf("Error opening file %s/n", FNAME);
exit(1);
}
/* extract the word */
word = getw(fp);
if (ferror(fp))
printf("Error reading file/n");
else
printf("Successful read: word = %d/n", word);
/* clean up */
fclose(fp);
unlink(FNAME);
return 0;
}
函数名: getx
功 能: 返回当前图形位置的x坐标
用 法: int far getx(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
char msg[80];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
/* move to the screen center point */
moveto(getmaxx() / 2, getmaxy() / 2);
/* create a message string */
sprintf(msg, "<-(%d, %d) is the here.", getx(), gety());
/* display the message */
outtext(msg);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: gety
功 能: 返回当前图形位置的y坐标
用 法: int far gety(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
char msg[80];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
/* move to the screen center point */
moveto(getmaxx() / 2, getmaxy() / 2);
/* create a message string */
sprintf(msg, "<-(%d, %d) is the here.", getx(), gety());
/* display the message */
outtext(msg);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: gmtime
功 能: 把日期和时间转换为格林尼治标准时间(GMT)
用 法: struct tm *gmtime(long *clock);
程序例:
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <dos.h>
/* Pacific Standard Time & Daylight Savings */
char *tzstr = "TZ=PST8PDT";
int main(void)
{
time_t t;
struct tm *gmt, *area;
putenv(tzstr);
tzset();
t = time(NULL);
area = localtime(&t);
printf("Local time is: %s", asctime(area));
gmt = gmtime(&t);
printf("GMT is: %s", asctime(gmt));
return 0;
}
函数名: gotoxy
功 能: 在文本窗口中设置光标
用 法: void gotoxy(int x, int y);
程序例:
#include <conio.h>
int main(void)
{
clrscr();
gotoxy(35, 12);
cprintf("Hello world");
getch();
return 0;
}
函数名: gotoxy
功 能: 在文本窗口中设置光标
用 法: void gotoxy(int x, int y);
程序例:
#include <conio.h>
int main(void)
{
clrscr();
gotoxy(35, 12);
cprintf("Hello world");
getch();
return 0;
}
函数名: graphdefaults
功 能: 将所有图形设置复位为它们的缺省值
用 法: void far graphdefaults(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int maxx, maxy;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "c://bor//Borland//bgi");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
maxx = getmaxx();
maxy = getmaxy();
/* output line with non-default settings */
setlinestyle(DOTTED_LINE, 0, 3);
line(0, 0, maxx, maxy);
outtextxy(maxx/2, maxy/3, "Before default values are restored.");
getch();
/* restore default values for everything */
graphdefaults();
/* clear the screen */
cleardevice();
/* output line with default settings */
line(0, 0, maxx, maxy);
outtextxy(maxx/2, maxy/3, "After restoring default values.");
/* clean up */
getch();
closegraph();
return 0;
}
函数名: grapherrormsg
功 能: 返回一个错误信息串的指针
用 法: char *far grapherrormsg(int errorcode);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
#define NONSENSE -50
int main(void)
{
/* FORCE AN ERROR TO OCCUR */
int gdriver = NONSENSE, gmode, errorcode;
/* initialize graphics mode */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
/* if an error occurred, then output a */
/* descriptive error message. */
if (errorcode != grOk)
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
/* draw a line */
line(0, 0, getmaxx(), getmaxy());
/* clean up */
getch();
closegraph();
return 0;
}
函数名: graphresult
功 能: 返回最后一次不成功的图形操作的错误代码
用 法: int far graphresult(void);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
/* draw a line */
line(0, 0, getmaxx(), getmaxy());
/* clean up */
getch();
closegraph();
return 0;
}
函数名: _graphfreemem
功 能: 用户可修改的图形存储区释放函数
用 法: void far _graphfreemem(void far *ptr, unsigned size);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
#include <alloc.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy;
/* clear the text screen */
clrscr();
printf("Press any key to initialize graphics mode:");
getch();
clrscr();
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* display a message */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, "Press any key to exit graphics mode:");
/* clean up */
getch();
closegraph();
return 0;
}
/* called by the graphics kernel to allocate memory */
void far * far _graphgetmem(unsigned size)
{
printf("_graphgetmem called to allocate %d bytes./n", size);
printf("hit any key:");
getch();
printf("/n");
/* allocate memory from far heap */
return farmalloc(size);
}
/* called by the graphics kernel to free memory */
void far _graphfreemem(void far *ptr, unsigned size)
{
printf("_graphfreemem called to free %d bytes./n", size);
printf("hit any key:");
getch();
printf("/n");
/* free ptr from far heap */
farfree(ptr);
}
函数名: _graphgetmem
功 能: 用户可修改的图形存储区分配函数
用 法: void far *far _graphgetmem(unsigned size);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
#include <alloc.h>
int main(void)
{
/* request autodetection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy;
/* clear the text screen */
clrscr();
printf("Press any key to initialize graphics mode:");
getch();
clrscr();
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* display a message */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, "Press any key to exit graphics mode:");
/* clean up */
getch();
closegraph();
return 0;
}
/* called by the graphics kernel to allocate memory */
void far * far _graphgetmem(unsigned size)
{
printf("_graphgetmem called to allocate %d bytes./n", size);
printf("hit any key:");
getch();
printf("/n");
/* allocate memory from far heap */
return farmalloc(size);
}
/* called by the graphics kernel to free memory */
void far _graphfreemem(void far *ptr, unsigned size)
{
printf("_graphfreemem called to free %d bytes./n", size);
printf("hit any key:");
getch();
printf("/n");
/* free ptr from far heap */
farfree(ptr);
}
H：
函数名: harderr
功 能: 建立一个硬件错误处理程序
用 法: void harderr(int (*fptr)());
程序例:
/*This program will trap disk errors and prompt
the user for action. Try running it with no
disk in drive A: to invoke its functions.*/
#include <stdio.h>
#include <conio.h>
#include <dos.h>
#define IGNORE 0
#define RETRY 1
#define ABORT 2
int buf[500];
/*define the error messages for trapping disk problems*/
static char *err_msg[] = {
"write protect",
"unknown unit",
"drive not ready",
"unknown command",
"data error (CRC)",
"bad request",
"seek error",
"unknown media type",
"sector not found",
"printer out of paper",
"write fault",
"read fault",
"general failure",
"reserved",
"reserved",
"invalid disk change"
};
error_win(char *msg)
{
int retval;
cputs(msg);
/*prompt for user to press a key to abort, retry, ignore*/
while(1)
{
retval= getch();
if (retval == 'a' || retval == 'A')
{
retval = ABORT;
break;
}
if (retval == 'r' || retval == 'R')
{
retval = RETRY;
break;
}
if (retval == 'i' || retval == 'I')
{
retval = IGNORE;
break;
}
}
return(retval);
}
/*pragma warn -par reduces warnings which occur
due to the non use of the parameters errval,
bp and si to the handler.*/
#pragma warn -par
int handler(int errval,int ax,int bp,int si)
{
static char msg[80];
unsigned di;
int drive;
int errorno;
di= _DI;
/*if this is not a disk error then it was
another device having trouble*/
if (ax < 0)
{
/* report the error */
error_win("Device error");
/* and return to the program directly requesting abort */
hardretn(ABORT);
}
/* otherwise it was a disk error */
drive = ax & 0x00FF;
errorno = di & 0x00FF;
/* report which error it was */
sprintf(msg, "Error: %s on drive %c/r/nA)bort, R)etry, I)gnore: ",
err_msg[errorno], 'A' + drive);
/*
return to the program via dos interrupt 0x23 with abort, retry,
or ignore as input by the user.
*/
hardresume(error_win(msg));
return ABORT;
}
#pragma warn +par
int main(void)
{
/*
install our handler on the hardware problem interrupt
*/
harderr(handler);
clrscr();
printf("Make sure there is no disk in drive A:/n");
printf("Press any key ..../n");
getch();
printf("Trying to access drive A:/n");
printf("fopen returned %p/n",fopen("A:temp.dat", "w"));
return 0;
}
函数名: hardresume
功 能: 硬件错误处理函数
用 法: void hardresume(int rescode);
程序例:
/* This program will trap disk errors and prompt the user for action. */
/* Try running it with no disk in drive A: to invoke its functions */
#include <stdio.h>
#include <conio.h>
#include <dos.h>
#define IGNORE 0
#define RETRY 1
#define ABORT 2
int buf[500];
/* define the error messages for trapping disk problems */
static char *err_msg[] = {
"write protect",
"unknown unit",
"drive not ready",
"unknown command",
"data error (CRC)",
"bad request",
"seek error",
"unknown media type",
"sector not found",
"printer out of paper",
"write fault",
"read fault",
"general failure",
"reserved",
"reserved",
"invalid disk change"
};
error_win(char *msg)
{
int retval;
cputs(msg);
/* prompt for user to press a key to abort, retry, ignore */
while(1)
{
retval= getch();
if (retval == 'a' || retval == 'A')
{
retval = ABORT;
break;
}
if (retval == 'r' || retval == 'R')
{
retval = RETRY;
break;
}
if (retval == 'i' || retval == 'I')
{
retval = IGNORE;
break;
}
}
return(retval);
}
/* pragma warn -par reduces warnings which occur due to the non use */
/* of the parameters errval, bp and si to the handler. */
#pragma warn -par
int handler(int errval,int ax,int bp,int si)
{
static char msg[80];
unsigned di;
int drive;
int errorno;
di= _DI;
/* if this is not a disk error then it was another device having trouble */
if (ax < 0)
{
/* report the error */
error_win("Device error");
/* and return to the program directly
requesting abort */
hardretn(ABORT);
}
/* otherwise it was a disk error */
drive = ax & 0x00FF;
errorno = di & 0x00FF;
/* report which error it was */
sprintf(msg, "Error: %s on drive %c/r/nA)bort, R)etry, I)gnore: ",
err_msg[errorno], 'A' + drive);
/* return to the program via dos interrupt 0x23 with abort, retry */
/* or ignore as input by the user. */
hardresume(error_win(msg));
return ABORT;
}
#pragma warn +par
int main(void)
{
/* install our handler on the hardware problem interrupt */
harderr(handler);
clrscr();
printf("Make sure there is no disk in drive A:/n");
printf("Press any key ..../n");
getch();
printf("Trying to access drive A:/n");
printf("fopen returned %p/n",fopen("A:temp.dat", "w"));
return 0;
}
函数名: highvideo
功 能: 选择高亮度文本字符
用 法: void highvideo(void);
程序例:
#include <conio.h>
int main(void)
{
clrscr();
lowvideo();
cprintf("Low Intensity text/r/n");
highvideo();
gotoxy(1,2);
cprintf("High Intensity Text/r/n");
return 0;
}
函数名: hypot
功 能: 计算直角三角形的斜边长
用 法: double hypot(double x, double y);
程序例:
#include <stdio.h>
#include <math.h>
int main(void)
{
double result;
double x = 3.0;
double y = 4.0;
result = hypot(x, y);
printf("The hypotenuse is: %lf/n", result);
return 0;
}
I：
函数名: imagesize
功 能: 返回保存位图像所需的字节数
用 法: unsigned far imagesize(int left, int top, int right, int bottom);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
#define ARROW_SIZE 10
void draw_arrow(int x, int y);
int main(void)
{
/* request autodetection */
int gdriver = DETECT, gmode, errorcode;
void *arrow;
int x, y, maxx;
unsigned int size;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
maxx = getmaxx();
x = 0;
y = getmaxy() / 2;
/* draw the image to be grabbed */
draw_arrow(x, y);
/* calculate the size of the image */
size = imagesize(x, y-ARROW_SIZE, x+(4*ARROW_SIZE), y+ARROW_SIZE);
/* allocate memory to hold the image */
arrow = malloc(size);
/* grab the image */
getimage(x, y-ARROW_SIZE, x+(4*ARROW_SIZE), y+ARROW_SIZE, arrow);
/* repeat until a key is pressed */
while (!kbhit())
{
/* erase old image */
putimage(x, y-ARROW_SIZE, arrow, XOR_PUT);
x += ARROW_SIZE;
if (x >= maxx)
x = 0;
/* plot new image */
putimage(x, y-ARROW_SIZE, arrow, XOR_PUT);
}
/* clean up */
free(arrow);
closegraph();
return 0;
}
void draw_arrow(int x, int y)
{
/* draw an arrow on the screen */
moveto(x, y);
linerel(4*ARROW_SIZE, 0);
linerel(-2*ARROW_SIZE, -1*ARROW_SIZE);
linerel(0, 2*ARROW_SIZE);
linerel(2*ARROW_SIZE, -1*ARROW_SIZE);
}
函数名: initgraph
功 能: 初始化图形系统
用 法: void far initgraph(int far *graphdriver, int far *graphmode,
char far *pathtodriver);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
/* initialize graphics mode */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* return with error code */
}
/* draw a line */
line(0, 0, getmaxx(), getmaxy());
/* clean up */
getch();
closegraph();
return 0;
}
函数名: inport
功 能: 从硬件端口中输入
用 法: int inp(int protid);
程序例:
#include <stdio.h>
#include <dos.h>
int main(void)
{
int result;
int port = 0; /* serial port 0 */
result = inport(port);
printf("Word read from port %d = 0x%X/n", port, result);
return 0;
}
函数名: insline
功 能: 在文本窗口中插入一个空行
用 法: void insline(void);
程序例:
#include <conio.h>
int main(void)
{
clrscr();
cprintf("INSLINE inserts an empty line in the text window/r/n");
cprintf("at the cursor position using the current text/r/n");
cprintf("background color. All lines below the empty one/r/n");
cprintf("move down one line and the bottom line scrolls/r/n");
cprintf("off the bottom of the window./r/n");
cprintf("/r/nPress any key to continue:");
gotoxy(1, 3);
getch();
insline();
getch();
return 0;
}
函数名: installuserdriver
功 能: 安装设备驱动程序到BGI设备驱动程序表中
用 法: int far installuserdriver(char far *name, int (*detect)(void));
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
/* function prototypes */
int huge detectEGA(void);
void checkerrors(void);
int main(void)
{
int gdriver, gmode;
/* install a user written device driver */
gdriver = installuserdriver("EGA", detectEGA);
/* must force use of detection routine */
gdriver = DETECT;
/* check for any installation errors */
checkerrors();
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* check for any initialization errors */
checkerrors();
/* draw a line */
line(0, 0, getmaxx(), getmaxy());
/* clean up */
getch();
closegraph();
return 0;
}
/* detects EGA or VGA cards */
int huge detectEGA(void)
{
int driver, mode, sugmode = 0;
detectgraph(&driver, &mode);
if ((driver == EGA) || (driver == VGA))
/* return suggested video mode number */
return sugmode;
else
/* return an error code */
return grError;
}
/* check for and report any graphics errors */
void checkerrors(void)
{
int errorcode;
/* read result of last graphics operation */
errorcode = graphresult();
if (errorcode != grOk)
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1);
}
}
函数名: installuserfont
功 能: 安装未嵌入BGI系统的字体文件(CHR)
用 法: int far installuserfont(char far *name);
程序例:
#include <graphics.h>
#include <stdlib.h>
#include <stdio.h>
#include <conio.h>
/* function prototype */
void checkerrors(void);
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode;
int userfont;
int midx, midy;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* check for any initialization errors */
checkerrors();
/* install a user defined font file */
userfont = installuserfont("USER.CHR");
/* check for any installation errors */
checkerrors();
/* select the user font */
settextstyle(userfont, HORIZ_DIR, 4);
/* output some text */
outtextxy(midx, midy, "Testing!");
/* clean up */
getch();
closegraph();
return 0;
}
/* check for and report any graphics errors */
void checkerrors(void)
{
int errorcode;
/* read result of last graphics operation */
errorcode = graphresult();
if (errorcode != grOk)
{
printf("Graphics error: %s/n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1);
}
}
函数名: int86
功 能: 通用8086软中断接口
用 法: int int86(int intr_num, union REGS *inregs, union REGS *outregs);
程序例:
#include <stdio.h>
#include <conio.h>
#include <dos.h>
#define VIDEO 0x10
void movetoxy(int x, int y)
{
union REGS regs;
regs.h.ah = 2; /* set cursor postion */
regs.h.dh = y;
regs.h.dl = x;
regs.h.bh = 0; /* video page 0 */
int86(VIDEO, ®s, ®s);
}
int main(void)
{
clrscr();
movetoxy(35, 10);
printf("Hello/n");
return 0;
}
函数名: int86x
功 能: 通用8086软中断接口
用 法: int int86x(int intr_num, union REGS *insegs, union REGS *outregs, struct SREGS *segregs);
程序例:
#include <dos.h>
#include <process.h>
#include <stdio.h>
int main(void)
{
char filename[80];
union REGS inregs, outregs;
struct SREGS segregs;
printf("Enter filename: ");
gets(filename);
inregs.h.ah = 0x43;
inregs.h.al = 0x21;
inregs.x.dx = FP_OFF(filename);
segregs.ds = FP_SEG(filename);
int86x(0x21, &inregs, &outregs, &segregs);
printf("File attribute: %X/n", outregs.x.cx);
return 0;
}
函数名: intdos
功 能: 通用DOS接口
用 法: int intdos(union REGS *inregs, union REGS *outregs);
程序例:
#include <stdio.h>
#include <dos.h>
/* deletes file name; returns 0 on success, nonzero on failure */
int delete_file(char near *filename)
{
union REGS regs;
int ret;
regs.h.ah = 0x41; /* delete file */
regs.x.dx = (unsigned) filename;
ret = intdos(®s, ®s);
/* if carry flag is set, there was an error */
return(regs.x.cflag ? ret : 0);
}
int main(void)
{
int err;
err = delete_file("NOTEXIST.$$$");
if (!err)
printf("Able to delete NOTEXIST.$$$/n");
else
printf("Not Able to delete NOTEXIST.$$$/n");
return 0;
}
函数名: intdosx
功 能: 通用DOS中断接口
用 法: int intdosx(union REGS *inregs, union REGS *outregs, struct SREGS *segregs);
程序例:
#include <stdio.h>
#include <dos.h>
/* deletes file name; returns 0 on success, nonzero on failure */
int delete_file(char far *filename)
{
union REGS regs; struct SREGS sregs;
int ret;
regs.h.ah = 0x41; /* delete file */
regs.x.dx = FP_OFF(filename);
sregs.ds = FP_SEG(filename);
ret = intdosx(®s, ®s, &sregs);
/* if carry flag is set, there was an error */
return(regs.x.cflag ? ret : 0);
}
int main(void)
{
int err;
err = delete_file("NOTEXIST.$$$");
if (!err)
printf("Able to delete NOTEXIST.$$$/n");
else
printf("Not Able to delete NOTEXIST.$$$/n");
return 0;
}
函数名: intr
功 能: 改变软中断接口
用 法: void intr(int intr_num, struct REGPACK *preg);
程序例:
#include <stdio.h>
#include <string.h>
#include <dir.h>
#include <dos.h>
#define CF 1 /* Carry flag */
int main(void)
{
char directory[80];
struct REGPACK reg;
printf("Enter directory to change to: ");
gets(directory);
reg.r_ax = 0x3B << 8; /* shift 3Bh into AH */
reg.r_dx = FP_OFF(directory);
reg.r_ds = FP_SEG(directory);
intr(0x21, ®);
if (reg.r_flags & CF)
printf("Directory change failed/n");
getcwd(directory, 80);
printf("The current directory is: %s/n", directory);
return 0;
}
函数名: ioctl
功 能: 控制I/O设备
用 法: int ioctl(int handle, int cmd[,int *argdx, int argcx]);
程序例:
#include <stdio.h>
#include <dir.h>
#include <io.h>
int main(void)
{
int stat;
/* use func 8 to determine if the default drive is removable */
stat = ioctl(0, 8, 0, 0);
if (!stat)
printf("Drive %c is removable./n", getdisk() + 'A');
else
printf("Drive %c is not removable./n", getdisk() + 'A');
return 0;
}
函数名: isatty
功 能: 检查设备类型
用 法: int isatty(int handle);
程序例:
#include <stdio.h>
#include <io.h>
int main(void)
{
int handle;
handle = fileno(stdprn);
if (isatty(handle))
printf("Handle %d is a device type/n", handle);
else
printf("Handle %d isn't a device type/n", handle);
return 0;
}
函数名: itoa
功 能: 把一整数转换为字符串
用 法: char *itoa(int value, char *string, int radix);
程序例:
#include <stdlib.h>
#include <stdio.h>
int main(void)
{
int number = 12345;
char string[25];
itoa(number, string, 10);
printf("integer = %d string = %s/n", number, string);
return 0;
}
- C语言函数大全（2）
- C语言函数大全
- C语言函数大全
- C语言函数大全
- C语言函数大全
- c语言函数大全
- C语言函数大全（1）
- C语言函数大全（3）
- C语言函数大全（4）
- C语言函数大全（5）
- c语言字符串函数大全
- c语言字符串函数大全
- C语言字符串函数大全
- C语言字符串函数大全
- C语言字符串函数大全
- C语言字符串函数大全
- C语言字符串函数大全
- C语言字符串函数大全
- RMI 程序能在 Windows 上运行，却在 Linux 上报错的一个原因
- 简单的用户权限管理
- CSND的Blog怎么回事？！测试了吗？测试好了再发布行不行?
- 静悟
- 如何做好优秀的UI设计
- C语言函数大全（2）
- windows系统下安装MySQL
- 功能完善的Java连接池调用实例
- C语言函数大全（3）
- 一个连接池的例子（来自JIVE）
- C语言函数大全（4）
- J2ME平台A-RPG游戏地图数据处理
- SOA实践 -- 使用IoC和AOP重构SOA应用
- C语言函数大全（5）
