LVM裸设备建库redhat
来源：互联网 发布：淘宝怎么没有安能快递 编辑：程序博客网 时间：2024/04/29 05:19
[root@oel4 ~]# fdisk /dev/sdd\
>
[root@oel4 ~]# fdisk /dev/sdd
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
The number of cylinders for this disk is set to 1305.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1305, default 1): 1
Last cylinder or +size or +sizeM or +sizeK (1-1305, default 1305):
Using default value 1305
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): t
Selected partition 1
Hex code (type L to list codes): l
0 Empty 1e Hidden W95 FAT1 75 PC/IX be Solaris boot
1 FAT12 24 NEC DOS 80 Old Minix bf Solaris
2 XENIX root 39 Plan 9 81 Minix / old Lin c1 DRDOS/sec (FAT-
3 XENIX usr 3c PartitionMagic 82 Linux swap c4 DRDOS/sec (FAT-
4 FAT16 <32M 40 Venix 80286 83 Linux c6 DRDOS/sec (FAT-
5 Extended 41 PPC PReP Boot 84 OS/2 hidden C: c7 Syrinx
6 FAT16 42 SFS 85 Linux extended da Non-FS data
7 HPFS/NTFS 4d QNX4.x 86 NTFS volume set db CP/M / CTOS / .
8 AIX 4e QNX4.x 2nd part 87 NTFS volume set de Dell Utility
9 AIX bootable 4f QNX4.x 3rd part 8e Linux LVM df BootIt
a OS/2 Boot Manag 50 OnTrack DM 93 Amoeba e1 DOS access
b W95 FAT32 51 OnTrack DM6 Aux 94 Amoeba BBT e3 DOS R/O
c W95 FAT32 (LBA) 52 CP/M 9f BSD/OS e4 SpeedStor
e W95 FAT16 (LBA) 53 OnTrack DM6 Aux a0 IBM Thinkpad hi eb BeOS fs
f W95 Ext'd (LBA) 54 OnTrackDM6 a5 FreeBSD ee EFI GPT
10 OPUS 55 EZ-Drive a6 OpenBSD ef EFI (FAT-12/16/
11 Hidden FAT12 56 Golden Bow a7 NeXTSTEP f0 Linux/PA-RISC b
12 Compaq diagnost 5c Priam Edisk a8 Darwin UFS f1 SpeedStor
14 Hidden FAT16 <3 61 SpeedStor a9 NetBSD f4 SpeedStor
16 Hidden FAT16 63 GNU HURD or Sys ab Darwin boot f2 DOS secondary
17 Hidden HPFS/NTF 64 Novell Netware b7 BSDI fs fd Linux raid auto
18 AST SmartSleep 65 Novell Netware b8 BSDI swap fe LANstep
1b Hidden W95 FAT3 70 DiskSecure Mult bb Boot Wizard hid ff BBT
1c Hidden W95 FAT3
Hex code (type L to list codes): 8e
Changed system type of partition 1 to 8e (Linux LVM)
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@oel4 ~]# pvcreate /dev/sdd1
Physical volume "/dev/sdd1" successfully created
[root@oel4 ~]# lvcreate --info
lvcreate: unrecognized option `--info'
Error during parsing of command line.
[root@oel4 ~]# man lvcreate
LVCREATE(8) LVCREATE(8)
NAME
lvcreate - create a logical volume in an existing volume group
SYNOPSIS
lvcreate [--addtag Tag] [--alloc AllocationPolicy] [-A/--autobackup y/n] [-C/--contiguous y/n] [-d/--debug] [-h/-?/--help]
[-i/--stripes Stripes [-I/--stripesize StripeSize]] {-l/--extents LogicalExtentsNumber |
-L/--size LogicalVolumeSize[kKmMgGtT]} [-M/--persistent y/n] [--minor minor] [-n/--name LogicalVolumeName] [-p/--permission
r/rw] [-r/--readahead ReadAheadSectors] [-R|--regionsize MirrorLogRegionSize] [-t/--test] [-v/--verbose] [-Z/--zero y/n]
VolumeGroupName [PhysicalVolumePath...]
lvcreate {-l/--extents LogicalExtentsNumber |
-L/--size LogicalVolumeSize[kKmMgGtT]} [-c/--chunksize ChunkSize] -s/--snapshot -n/--name SnapshotLogicalVolumeName Origi-
nalLogicalVolumePath
DESCRIPTION
lvcreate creates a new logical volume in a volume group ( see vgcreate(8), vgchange(8) ) by allocating logical extents from
the free physical extent pool of that volume group. If there are not enough free physical extents then the volume group can
be extended ( see vgextend(8) ) with other physical volumes or by reducing existing logical volumes of this volume group in
size ( see lvreduce(8) ).
The second form supports the creation of snapshot logical volumes which keep the contents of the original logical volume for
backup purposes.
OPTIONS
See lvm for common options.
-c, --chunksize ChunkSize
Power of 2 chunk size for the snapshot logical volume between 4k and 512k.
[root@oel4 ~]#
[root@oel4 ~]# vgcreate vg01 /dev/sdd1
Volume group "vg01" successfully created
[root@oel4 ~]# vgdisplay
--- Volume group ---
VG Name vg01
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 1
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 10.00 GB
PE Size 4.00 MB
Total PE 2559
Alloc PE / Size 0 / 0
Free PE / Size 2559 / 10.00 GB
VG UUID Xq3EQd-NWV6-aPr4-IH5N-GSH0-PrDR-NUChaS
[root@oel4 ~]# lvcreate -L 112M -n control.ctl vg01
Logical volume "control.ctl" created
[root@oel4 ~]# rmlv -f vg01control.ctl
-bash: rmlv: command not found
[root@oel4 ~]# cd /mapper
-bash: cd: /mapper: No such file or directory
[root@oel4 ~]# cd /dev/mapper
[root@oel4 mapper]# ll
total 0
crw------- 1 root root 10, 63 Dec 21 09:19 control
brw-rw---- 1 root disk 253, 0 Dec 21 09:50 vg01-control.ctl
[root@oel4 mapper]# rm -rf vg01-control.ctl
[root@oel4 mapper]# ll
total 0
crw------- 1 root root 10, 63 Dec 21 09:19 control
[root@oel4 mapper]# [Acd
-bash: [Acd: command not found
[root@oel4 mapper]# cd
[root@oel4 ~]# lvcreate -L 112M -n control01.ctl vg01
Logical volume "control01.ctl" created
[root@oel4 ~]# lvcreate -L 112M -n control02.ctl vg01
Logical volume "control02.ctl" created
[root@oel4 ~]# lvcreate -L 112M -n control03.ctl vg01
Logical volume "control03.ctl" created
[root@oel4 ~]# lvcreate -L 100M -n drsys01 vg01
Logical volume "drsys01" created
[root@oel4 ~]# lvcreate -L 100M -n index.dbf vg01
Logical volume "index.dbf" created
[root@oel4 ~]# lvcreate -L 120M -n redo01.log vg01
Logical volume "redo01.log" created
[root@oel4 ~]# lvcreate -L 120M -n redo02.log vg01
Logical volume "redo02.log" created
[root@oel4 ~]# lvcreate -L 120M -n redo03.log vg01
Logical volume "redo03.log" created
[root@oel4 ~]# lvcreate -L 51M -n spfile.dbf vg01
Rounding up size to full physical extent 52.00 MB
Logical volume "spfile.dbf" created
[root@oel4 ~]# lvcreate -L 2500M -n system01.dbf vg01
Logical volume "system01.dbf" created
[root@oel4 ~]# lvcreate -L 200M temp.dbf vg01
Volume group "temp.dbf" doesn't exist
[root@oel4 ~]# lvcreate -L 200M -n temp.dbf vg01
Logical volume "temp.dbf" created
[root@oel4 ~]# lvcreate -L 100M -n tools01.dbf vg01
Logical volume "tools01.dbf" created
[root@oel4 ~]# lvcreate -L 500M -n undotbs.dbf vg01
Logical volume "undotbs.dbf" created
[root@oel4 ~]# lvcreate -L 200M -n users.dbf vg01
Logical volume "users.dbf" created
[root@oel4 ~]# lvcreate -L 100M -n xdb01.dbf vg01
Logical volume "xdb01.dbf" created
[root@oel4 ~]# vi /etc/sysconfig/rawdevices
# This file and interface are deprecated.
# Applications needing raw device access should open regular
# block devices with O_DIRECT.
# raw device bindings
# format: <rawdev> <major> <minor>
# <rawdev> <blockdev>
# example: /dev/raw/raw1 /dev/sda1
# /dev/raw/raw2 8 5
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
"/etc/sysconfig/rawdevices" 25L, 946C written
[root@oel4 ~]# service rawdevices restart
Assigning devices:
/dev/raw/raw02 --> /dev/mapper/vg01-control01.ctl
/dev/raw/raw2: bound to major 253, minor 1
/dev/raw/raw03 --> /dev/mapper/vg01-control02.ctl
/dev/raw/raw3: bound to major 253, minor 2
/dev/raw/raw04 --> /dev/mapper/vg01-control03.ctl
/dev/raw/raw4: bound to major 253, minor 3
/dev/raw/raw05 --> /dev/mapper/vg01-index.dbf
/dev/raw/raw5: bound to major 253, minor 5
/dev/raw/raw06 --> /dev/mapper/vg01-redo01.log
/dev/raw/raw6: bound to major 253, minor 6
/dev/raw/raw07 --> /dev/mapper/vg01-redo02.log
/dev/raw/raw7: bound to major 253, minor 7
/dev/raw/raw08 --> /dev/mapper/vg01-redo03.log
/dev/raw/raw8: bound to major 253, minor 8
/dev/raw/raw09 --> /dev/mapper/vg01-spfile.dbf
/dev/raw/raw9: bound to major 253, minor 9
/dev/raw/raw10 --> /dev/mapper/vg01-system01.dbf
/dev/raw/raw10: bound to major 253, minor 10
/dev/raw/raw11 --> /dev/mapper/vg01-temp.dbf
/dev/raw/raw11: bound to major 253, minor 11
/dev/raw/raw12 --> /dev/mapper/vg01-undotbs.dbf
/dev/raw/raw12: bound to major 253, minor 13
/dev/raw/raw13 --> /dev/mapper/vg01-users.dbf
/dev/raw/raw13: bound to major 253, minor 14
/dev/raw/raw14 --> /dev/mapper/vg01-drsys01
/dev/raw/raw14: bound to major 253, minor 4
/dev/raw/raw15 --> /dev/mapper/vg01-tools01
Cannot locate block device '/dev/mapper/vg01-tools01' (No such file or directory)
/dev/raw/raw16 --> /dev/mapper/vg01-xdb01
Cannot locate block device '/dev/mapper/vg01-xdb01' (No such file or directory)
done
[root@oel4 ~]# vi /etc/sysconfig/rawdevices
# This file and interface are deprecated.
# Applications needing raw device access should open regular
# block devices with O_DIRECT.
# raw device bindings
# format: <rawdev> <major> <minor>
# <rawdev> <blockdev>
# example: /dev/raw/raw1 /dev/sda1
# /dev/raw/raw2 8 5
/dev/raw/raw02 /dev/mapper/vg01-control01.ctl
/dev/raw/raw03 /dev/mapper/vg01-control02.ctl
/dev/raw/raw04 /dev/mapper/vg01-control03.ctl
/dev/raw/raw05 /dev/mapper/vg01-index.dbf
/dev/raw/raw06 /dev/mapper/vg01-redo01.log
/dev/raw/raw07 /dev/mapper/vg01-redo02.log
/dev/raw/raw08 /dev/mapper/vg01-redo03.log
/dev/raw/raw09 /dev/mapper/vg01-spfile.dbf
/dev/raw/raw10 /dev/mapper/vg01-system01.dbf
/dev/raw/raw11 /dev/mapper/vg01-temp.dbf
/dev/raw/raw12 /dev/mapper/vg01-undotbs.dbf
/dev/raw/raw13 /dev/mapper/vg01-users.dbf
/dev/raw/raw14 /dev/mapper/vg01-drsys01
/dev/raw/raw15 /dev/mapper/vg01-tools01
/dev/raw/raw16 /dev/mapper/vg01-xdb01
~
~
~
~
[root@oel4 ~]# service rawdevices restart
Assigning devices:
/dev/raw/raw02 --> /dev/mapper/vg01-control01.ctl
/dev/raw/raw2: bound to major 253, minor 1
/dev/raw/raw03 --> /dev/mapper/vg01-control02.ctl
/dev/raw/raw3: bound to major 253, minor 2
/dev/raw/raw04 --> /dev/mapper/vg01-control03.ctl
/dev/raw/raw4: bound to major 253, minor 3
/dev/raw/raw05 --> /dev/mapper/vg01-index.dbf
/dev/raw/raw5: bound to major 253, minor 5
/dev/raw/raw06 --> /dev/mapper/vg01-redo01.log
/dev/raw/raw6: bound to major 253, minor 6
/dev/raw/raw07 --> /dev/mapper/vg01-redo02.log
/dev/raw/raw7: bound to major 253, minor 7
/dev/raw/raw08 --> /dev/mapper/vg01-redo03.log
/dev/raw/raw8: bound to major 253, minor 8
/dev/raw/raw09 --> /dev/mapper/vg01-spfile.dbf
/dev/raw/raw9: bound to major 253, minor 9
/dev/raw/raw10 --> /dev/mapper/vg01-system01.dbf
/dev/raw/raw10: bound to major 253, minor 10
/dev/raw/raw11 --> /dev/mapper/vg01-temp.dbf
/dev/raw/raw11: bound to major 253, minor 11
/dev/raw/raw12 --> /dev/mapper/vg01-undotbs.dbf
/dev/raw/raw12: bound to major 253, minor 13
/dev/raw/raw13 --> /dev/mapper/vg01-users.dbf
/dev/raw/raw13: bound to major 253, minor 14
/dev/raw/raw14 --> /dev/mapper/vg01-drsys01
/dev/raw/raw14: bound to major 253, minor 4
/dev/raw/raw15 --> /dev/mapper/vg01-tools01
Cannot locate block device '/dev/mapper/vg01-tools01' (No such file or directory)
/dev/raw/raw16 --> /dev/mapper/vg01-xdb01
Cannot locate block device '/dev/mapper/vg01-xdb01' (No such file or directory)
done
[root@oel4 ~]# cd /dev/mapper/
[root@oel4 mapper]# ll
total 0
crw------- 1 root root 10, 63 Dec 21 09:19 control
brw-rw---- 1 root disk 253, 1 Dec 21 09:57 vg01-control01.ctl
brw-rw---- 1 root disk 253, 2 Dec 21 09:57 vg01-control02.ctl
brw-rw---- 1 root disk 253, 3 Dec 21 09:57 vg01-control03.ctl
brw-rw---- 1 root disk 253, 4 Dec 21 10:00 vg01-drsys01
brw-rw---- 1 root disk 253, 5 Dec 21 10:00 vg01-index.dbf
brw-rw---- 1 root disk 253, 6 Dec 21 10:01 vg01-redo01.log
brw-rw---- 1 root disk 253, 7 Dec 21 10:01 vg01-redo02.log
brw-rw---- 1 root disk 253, 8 Dec 21 10:01 vg01-redo03.log
brw-rw---- 1 root disk 253, 9 Dec 21 10:05 vg01-spfile.dbf
brw-rw---- 1 root disk 253, 10 Dec 21 10:06 vg01-system01.dbf
brw-rw---- 1 root disk 253, 11 Dec 21 10:07 vg01-temp.dbf
brw-rw---- 1 root disk 253, 12 Dec 21 10:07 vg01-tools01.dbf
brw-rw---- 1 root disk 253, 13 Dec 21 10:08 vg01-undotbs.dbf
brw-rw---- 1 root disk 253, 14 Dec 21 10:09 vg01-users.dbf
brw-rw---- 1 root disk 253, 15 Dec 21 10:10 vg01-xdb01.dbf
[root@oel4 mapper]# vi /etc/sysconfig/rawdevices
# This file and interface are deprecated.
# Applications needing raw device access should open regular
# block devices with O_DIRECT.
# raw device bindings
# format: <rawdev> <major> <minor>
# <rawdev> <blockdev>
# example: /dev/raw/raw1 /dev/sda1
# /dev/raw/raw2 8 5
/dev/raw/raw02 /dev/mapper/vg01-control01.ctl
/dev/raw/raw03 /dev/mapper/vg01-control02.ctl
/dev/raw/raw04 /dev/mapper/vg01-control03.ctl
/dev/raw/raw05 /dev/mapper/vg01-index.dbf
/dev/raw/raw06 /dev/mapper/vg01-redo01.log
/dev/raw/raw07 /dev/mapper/vg01-redo02.log
/dev/raw/raw08 /dev/mapper/vg01-redo03.log
/dev/raw/raw09 /dev/mapper/vg01-spfile.dbf
/dev/raw/raw10 /dev/mapper/vg01-system01.dbf
/dev/raw/raw11 /dev/mapper/vg01-temp.dbf
/dev/raw/raw12 /dev/mapper/vg01-undotbs.dbf
/dev/raw/raw13 /dev/mapper/vg01-users.dbf
/dev/raw/raw14 /dev/mapper/vg01-drsys01
/dev/raw/raw15 /dev/mapper/vg01-tools01
/dev/raw/raw16 /dev/mapper/vg01-xdb01
~
~
~
~
"/etc/sysconfig/rawdevices" 26L, 959C written
[root@oel4 mapper]# service rawdevices restart
Assigning devices:
/dev/raw/raw02 --> /dev/mapper/vg01-control01.ctl
/dev/raw/raw2: bound to major 253, minor 1
/dev/raw/raw03 --> /dev/mapper/vg01-control02.ctl
/dev/raw/raw3: bound to major 253, minor 2
/dev/raw/raw04 --> /dev/mapper/vg01-control03.ctl
/dev/raw/raw4: bound to major 253, minor 3
/dev/raw/raw05 --> /dev/mapper/vg01-index.dbf
/dev/raw/raw5: bound to major 253, minor 5
/dev/raw/raw06 --> /dev/mapper/vg01-redo01.log
/dev/raw/raw6: bound to major 253, minor 6
/dev/raw/raw07 --> /dev/mapper/vg01-redo02.log
/dev/raw/raw7: bound to major 253, minor 7
/dev/raw/raw08 --> /dev/mapper/vg01-redo03.log
/dev/raw/raw8: bound to major 253, minor 8
/dev/raw/raw09 --> /dev/mapper/vg01-spfile.dbf
/dev/raw/raw9: bound to major 253, minor 9
/dev/raw/raw10 --> /dev/mapper/vg01-system01.dbf
/dev/raw/raw10: bound to major 253, minor 10
/dev/raw/raw11 --> /dev/mapper/vg01-temp.dbf
/dev/raw/raw11: bound to major 253, minor 11
/dev/raw/raw12 --> /dev/mapper/vg01-undotbs.dbf
/dev/raw/raw12: bound to major 253, minor 13
/dev/raw/raw13 --> /dev/mapper/vg01-users.dbf
/dev/raw/raw13: bound to major 253, minor 14
/dev/raw/raw14 --> /dev/mapper/vg01-drsys01.dbf
Cannot locate block device '/dev/mapper/vg01-drsys01.dbf' (No such file or directory)
/dev/raw/raw15 --> /dev/mapper/vg01-tools01.dbf
/dev/raw/raw15: bound to major 253, minor 12
/dev/raw/raw16 --> /dev/mapper/vg01-xdb01.dbf
/dev/raw/raw16: bound to major 253, minor 15
done
[root@oel4 mapper]# vi /etc/sysconfig/rawdevices
# This file and interface are deprecated.
# Applications needing raw device access should open regular
# block devices with O_DIRECT.
# raw device bindings
# format: <rawdev> <major> <minor>
# <rawdev> <blockdev>
# example: /dev/raw/raw1 /dev/sda1
# /dev/raw/raw2 8 5
/dev/raw/raw02 /dev/mapper/vg01-control01.ctl
/dev/raw/raw03 /dev/mapper/vg01-control02.ctl
/dev/raw/raw04 /dev/mapper/vg01-control03.ctl
/dev/raw/raw05 /dev/mapper/vg01-index.dbf
/dev/raw/raw06 /dev/mapper/vg01-redo01.log
/dev/raw/raw07 /dev/mapper/vg01-redo02.log
/dev/raw/raw08 /dev/mapper/vg01-redo03.log
/dev/raw/raw09 /dev/mapper/vg01-spfile.dbf
/dev/raw/raw10 /dev/mapper/vg01-system01.dbf
/dev/raw/raw11 /dev/mapper/vg01-temp.dbf
/dev/raw/raw12 /dev/mapper/vg01-undotbs.dbf
/dev/raw/raw13 /dev/mapper/vg01-users.dbf
/dev/raw/raw14 /dev/mapper/vg01-drsys01.dbf
/dev/raw/raw15 /dev/mapper/vg01-tools01.dbf
/dev/raw/raw16 /dev/mapper/vg01-xdb01.dbf
~
~
~
"/etc/sysconfig/rawdevices" 26L, 955C written
[root@oel4 mapper]# service rawdevices restart
Assigning devices:
/dev/raw/raw02 --> /dev/mapper/vg01-control01.ctl
/dev/raw/raw2: bound to major 253, minor 1
/dev/raw/raw03 --> /dev/mapper/vg01-control02.ctl
/dev/raw/raw3: bound to major 253, minor 2
/dev/raw/raw04 --> /dev/mapper/vg01-control03.ctl
/dev/raw/raw4: bound to major 253, minor 3
/dev/raw/raw05 --> /dev/mapper/vg01-index.dbf
/dev/raw/raw5: bound to major 253, minor 5
/dev/raw/raw06 --> /dev/mapper/vg01-redo01.log
/dev/raw/raw6: bound to major 253, minor 6
/dev/raw/raw07 --> /dev/mapper/vg01-redo02.log
/dev/raw/raw7: bound to major 253, minor 7
/dev/raw/raw08 --> /dev/mapper/vg01-redo03.log
/dev/raw/raw8: bound to major 253, minor 8
/dev/raw/raw09 --> /dev/mapper/vg01-spfile.dbf
/dev/raw/raw9: bound to major 253, minor 9
/dev/raw/raw10 --> /dev/mapper/vg01-system01.dbf
/dev/raw/raw10: bound to major 253, minor 10
/dev/raw/raw11 --> /dev/mapper/vg01-temp.dbf
/dev/raw/raw11: bound to major 253, minor 11
/dev/raw/raw12 --> /dev/mapper/vg01-undotbs.dbf
/dev/raw/raw12: bound to major 253, minor 13
/dev/raw/raw13 --> /dev/mapper/vg01-users.dbf
/dev/raw/raw13: bound to major 253, minor 14
/dev/raw/raw14 --> /dev/mapper/vg01-drsys01
/dev/raw/raw14: bound to major 253, minor 4
/dev/raw/raw15 --> /dev/mapper/vg01-tools01.dbf
/dev/raw/raw15: bound to major 253, minor 12
/dev/raw/raw16 --> /dev/mapper/vg01-xdb01.dbf
/dev/raw/raw16: bound to major 253, minor 15
done
[root@oel4 mapper]# vi /etc/rc/local
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
[root@oel4 mapper]# vi /etc/rc.local
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
"/etc/rc.local" 24L, 799C written
[root@oel4 mapper]# chown oracle:oninstall /dev/raw/raw2
chown: `oracle:oninstall': invalid group
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw2
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw2
chown -R oracle:oinstall /dev/raw/raw3
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw3
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw4
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw5
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw6
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw7
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw8
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw9
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw10
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw11
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw12
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw13
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw14
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw15
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw16
[root@oel4 mapper]# chown -R oracle:oinstall /dev/raw/raw3
[root@oel4 mapper]# cd /dev/raw/
[root@oel4 raw]# ll
total 0
crw-rw---- 1 oracle oinstall 162, 10 Dec 21 10:15 raw10
crw-rw---- 1 oracle oinstall 162, 11 Dec 21 10:15 raw11
crw-rw---- 1 oracle oinstall 162, 12 Dec 21 10:15 raw12
crw-rw---- 1 oracle oinstall 162, 13 Dec 21 10:15 raw13
crw-rw---- 1 oracle oinstall 162, 14 Dec 21 10:15 raw14
crw-rw---- 1 oracle oinstall 162, 15 Dec 21 10:15 raw15
crw-rw---- 1 oracle oinstall 162, 16 Dec 21 10:15 raw16
crw-rw---- 1 oracle oinstall 162, 2 Dec 21 10:15 raw2
crw-rw---- 1 oracle oinstall 162, 3 Dec 21 10:15 raw3
crw-rw---- 1 oracle oinstall 162, 4 Dec 21 10:15 raw4
crw-rw---- 1 oracle oinstall 162, 5 Dec 21 10:15 raw5
crw-rw---- 1 oracle oinstall 162, 6 Dec 21 10:15 raw6
crw-rw---- 1 oracle oinstall 162, 7 Dec 21 10:15 raw7
crw-rw---- 1 oracle oinstall 162, 8 Dec 21 10:15 raw8
crw-rw---- 1 oracle oinstall 162, 9 Dec 21 10:15 raw9
[root@oel4 raw]# vi /etc/rc.local
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
chown oracle:oninstall /dev/raw/raw2
chown oracle:oninstall /dev/raw/raw3
chown oracle:oninstall /dev/raw/raw4
chown oracle:oninstall /dev/raw/raw5
chown oracle:oninstall /dev/raw/raw6
chown oracle:oninstall /dev/raw/raw7
chown oracle:oninstall /dev/raw/raw8
chown oracle:oninstall /dev/raw/raw9
chown oracle:oninstall /dev/raw/raw10
chown oracle:oninstall /dev/raw/raw11
chown oracle:oninstall /dev/raw/raw12
chown oracle:oninstall /dev/raw/raw13
chown oracle:oninstall /dev/raw/raw14
chown oracle:oninstall /dev/raw/raw15
chown oracle:oninstall /dev/raw/raw16
~
~
~
~
~
chown -R oracle:oinstall /dev/raw/raw12
chown -R oracle:oinstall /dev/raw/raw14
"/etc/rc.local" 24L, 821C written
[root@oel4 raw]# vi DBCA_RAW_CONFIG
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
[root@oel4 raw]# su - oracle
[oracle@oel4 ~]$ vi DBCA_RAW_CONFIG
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
"DBCA_RAW_CONFIG" [New] 15L, 297C written
[oracle@oel4 ~]$ dbca
DISPLAY not set.
Set DISPLAY environment variable, then re-run.
[oracle@oel4 ~]$ export DISPLAY=128.196.0.3:0.0
[oracle@oel4 ~]$ xclock
[oracle@oel4 ~]$ dbca
[oracle@oel4 ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Dec 21 11:09:51 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba
Connected.
SQL> show parameter db_name
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
db_name string prod
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
SQL> alter database mount
2 ;
Database altered.
SQL> archive log list
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination /u01/app/oracle/product/10.2/db/dbs/arch
Oldest online log sequence 0
Current log sequence 1
SQL> alter database open
2 ;
Database altered.
- LVM裸设备建库redhat
- LVM裸设备建库oracle10g
- 在红旗 DC server（linux）上用lvm建裸设备并建库
- LVM——Redhat
- redhat上lvm的设置.
- RAC之redhat裸设备启动配置
- redhat 5下增加裸设备
- Redhat 4、5、6设置裸设备
- SUSE Linux 多路径软件+LVM+裸设备的配置
- 将oracle10g安装在lvm映射的裸设备上
- Redhat 平台下 LVM 管理说明
- RedHat 6.3 将物理LVM做文件系统
- Linux之redhat中lvm分区教程
- Redhat 5 中裸设备(raw) 的配置
- Redhat 5 中裸设备(raw) 的配置
- Redhat 5 中裸设备(raw) 的配置
- 在 libvirt 上使用 LVM 存储设备
- 在 libvirt 上使用 LVM 存储设备
- 鼠标经过连接弹出层效果(自适应显示方向)
- ES PES TS
- JavaScript原型继承
- 图片
- 浅谈JavaScript编程语言的编码规范
- LVM裸设备建库redhat
- java 中List转为Map
- 不要为别人而活
- VC++ 内存泄露的查询方法
- div层自动适应显示方向
- 用Memcached存储Session
- CDP协议 以及 在Cisco路由器上配置WCCP
- MySQL错误:Every derived table must have its own alias
- Human Computing -- GWAP Game
