mongoDB 入门指南、示例
来源:互联网 发布:真假客服识别网站源码 编辑:程序博客网 时间:2024/04/26 21:15
版权所有,转载请注明出处本文出自:http://www.cnblogs.com/hoojo/archive/2011/06/01/2066426.html
一、准备工作
1、 下载mongoDB
下载地址:http://www.mongodb.org/downloads
选择合适你的版本
相关文档:http://www.mongodb.org/display/DOCS/Tutorial
2. 安装准备
将mongodb移动到/usr/local/server/mongdb文件夹
mv mongodb-linux-i686-1.8.2 /usr/local/mongodb
创建数据库文件夹与日志文件
mkdir /usr/local/mongodb/data
touch /usr/local/mongodb/logs
3. 设置开机自启动
将mongodb启动项目追加入rc.local保证mongodb在服务器开机时启动
echo "/usr/local/server/mongodb/bin/mongod --dbpath=/usr/local/server/mongodb/data –logpath=/usr/local/server/mongodb/logs –logappend --auth –port=27017" >> /etc/rc.local
4. 启动mongodb
cd到mongodb目录下的bin文件夹启动mongodb
//下面这个是需要权限的登录方式, 用户连接需要用户名和密码
/usr/local/server/mongodb/bin/mongod --dbpath=/usr/local/server/mongodb/data --logpath=/usr/local/server/mongodb/logs --logappend --auth --port=27017 --fork
//这个是不需要密码的
/usr/local/server/mongodb/bin/mongod --dbpath=/usr/local/server/mongodb/data --logpath=/usr/local/server/mongodb/logs --logappend --port=27017 --fork
5. 参数解释: --dbpath 数据库路径(数据文件)
--logpath 日志文件路径
--master 指定为主机器
--slave 指定为从机器
--source 指定主机器的IP地址
--pologSize 指定日志文件大小不超过64M.因为resync是非常操作量大且耗时,最好通过设置一个足够大的oplogSize来避免resync(默认的 oplog大小是空闲磁盘大小的5%)。
--logappend 日志文件末尾添加
--port 启用端口号
--fork 在后台运行
--only 指定只复制哪一个数据库
--slavedelay 指从复制检测的时间间隔
--auth 是否需要验证权限登录(用户名和密码)
-h [ --help ] show this usage information
--version show version information
-f [ --config ] arg configuration file specifying additional options
--port arg specify port number
--bind_ip arg local ip address to bind listener - all local ips
bound by default
-v [ --verbose ] be more verbose (include multiple times for more
verbosity e.g. -vvvvv)
--dbpath arg (=/data/db/) directory for datafiles 指定数据存放目录
--quiet quieter output 静默模式
--logpath arg file to send all output to instead of stdout 指定日志存放目录
--logappend appnd to logpath instead of over-writing 指定日志是以追加还是以覆盖的方式写入日志文件
--fork fork server process 以创建子进程的方式运行
--cpu periodically show cpu and iowait utilization 周期性的显示cpu和io的使用情况
--noauth run without security 无认证模式运行
--auth run with security 认证模式运行
--objcheck inspect client data for validity on receipt 检查客户端输入数据的有效性检查
--quota enable db quota management 开始数据库配额的管理
--quotaFiles arg number of files allower per db, requires --quota 规定每个数据库允许的文件数
--appsrvpath arg root directory for the babble app server
--nocursors diagnostic/debugging option 调试诊断选项
--nohints ignore query hints 忽略查询命中率
--nohttpinterface disable http interface 关闭http接口,默认是28017
--noscripting disable scripting engine 关闭脚本引擎
--noprealloc disable data file preallocation 关闭数据库文件大小预分配
--smallfiles use a smaller default file size 使用较小的默认文件大小
--nssize arg (=16) .ns file size (in MB) for new databases 新数据库ns文件的默认大小
--diaglog arg 0=off 1=W 2=R 3=both 7=W+some reads 提供的方式,是只读,只写,还是读写都行,还是主要写+部分的读模式
--sysinfo print some diagnostic system information 打印系统诊断信息
--upgrade upgrade db if needed 如果需要就更新数据库
--repair run repair on all dbs 修复所有的数据库
--notablescan do not allow table scans 不运行表扫描
--syncdelay arg (=60) seconds between disk syncs (0 for never) 系统同步刷新磁盘的时间,默认是60s
Replication options:
--master master mode 主复制模式
--slave slave mode 从复制模式
--source arg when slave: specify master as <server:port> 当为从时,指定主的地址和端口
--only arg when slave: specify a single database to replicate 当为从时,指定需要从主复制的单一库
--pairwith arg address of server to pair with
--arbiter arg address of arbiter server 仲裁服务器,在主主中和pair中用到
--autoresync automatically resync if slave data is stale 自动同步从的数据
--oplogSize arg size limit (in MB) for op log 指定操作日志的大小
--opIdMem arg size limit (in bytes) for in memory storage of op ids指定存储操作日志的内存大小
Sharding options:
--configsvr declare this is a config db of a cluster 指定shard中的配置服务器
--shardsvr declare this is a shard db of a cluster 指定shard服务器
6. 进入数据库的CLI管理界面
cd到mongodb目录下的bin文件夹,执行命令./mongo
运行如下:
[root@namenode mongodb]# ./bin/mongo
MongoDB shell version: 1.8.2
connecting to: test
> use test;
switched to db test
若数据库出现如不能连上,则是一个data目录下的mongod.lock文件的问题,可以用如下的修复的命令,
mongod --repair
二、DB shell数据操作
shell命令操作语法和JavaScript很类似,其实控制台底层的查询语句都是用JavaScript脚本完成操作的。
Ø 数据库
1、Help查看命令提示
help
db.help();
db.yourColl.help();
db.youColl.find().help();
rs.help();
2、切换/创建数据库
>use yourDB;
当创建一个集合(table)的时候会自动创建当前数据库
3、查询所有数据库
show dbs;
4、删除当前使用数据库
db.dropDatabase();
5、从指定主机上克隆数据库
db.cloneDatabase(“127.0.0.1”);
将指定机器上的数据库的数据克隆到当前数据库
6、从指定的机器上复制指定数据库数据到某个数据库
db.copyDatabase("mydb", "temp", "127.0.0.1");
将本机的mydb的数据复制到temp数据库中
7、修复当前数据库
db.repairDatabase();
8、查看当前使用的数据库
db.getName();
db;
db和getName方法是一样的效果,都可以查询当前使用的数据库
9、显示当前db状态
db.stats();
10、当前db版本
db.version();
11、查看当前db的链接机器地址
db.getMongo();
Ø Collection聚集集合
1、创建一个聚集集合(table)
db.createCollection(“collName”, {size: 20, capped: 5, max: 100});
2、得到指定名称的聚集集合(table)
db.getCollection("account");
3、得到当前db的所有聚集集合
db.getCollectionNames();
4、显示当前db所有聚集索引的状态
db.printCollectionStats();
Ø 用户相关
1、添加一个用户
db.addUser("name");
db.addUser("userName", "pwd123", true);
添加用户、设置密码、是否只读
2、数据库认证、安全模式
db.auth("userName", "123123");
3、显示当前所有用户
show users;
4、删除用户
db.removeUser("userName");
Ø 其他
1、查询之前的错误信息
db.getPrevError();
2、清除错误记录
db.resetError();
三、Collection聚集集合操作
Ø 查看聚集集合基本信息
1、查看帮助
db.yourColl.help();
2、查询当前集合的数据条数
db.yourColl.count();
3、查看数据空间大小
db.userInfo.dataSize();
4、得到当前聚集集合所在的db
db.userInfo.getDB();
5、得到当前聚集的状态
db.userInfo.stats();
6、得到聚集集合总大小
db.userInfo.totalSize();
7、聚集集合储存空间大小
db.userInfo.storageSize();
8、Shard版本信息
db.userInfo.getShardVersion()
9、聚集集合重命名
db.userInfo.renameCollection("users");
将userInfo重命名为users
10、删除当前聚集集合
db.userInfo.drop();
Ø 聚集集合查询
1、查询所有记录
db.userInfo.find();
相当于:select * from userInfo;
默认每页显示20条记录,当显示不下的情况下,可以用it迭代命令查询下一页数据。注意:键入it命令不能带“;”
但是你可以设置每页显示数据的大小,用DBQuery.shellBatchSize = 50;这样每页就显示50条记录了。
2、查询去掉后的当前聚集集合中的某列的重复数据
db.userInfo.distinct("name");
会过滤掉name中的相同数据
相当于:select distict name from userInfo;
3、查询age = 22的记录
db.userInfo.find({"age": 22});
相当于: select * from userInfo where age = 22;
4、查询age > 22的记录
db.userInfo.find({age: {$gt: 22}});
相当于:select * from userInfo where age > 22;
5、查询age < 22的记录
db.userInfo.find({age: {$lt: 22}});
相当于:select * from userInfo where age < 22;
6、查询age >= 25的记录
db.userInfo.find({age: {$gte: 25}});
相当于:select * from userInfo where age >= 25;
7、查询age <= 25的记录
db.userInfo.find({age: {$lte: 25}});
8、查询age >= 23 并且 age <= 26
db.userInfo.find({age: {$gte: 23, $lte: 26}});
9、查询name中包含 mongo的数据
db.userInfo.find({name: /mongo/});
//相当于%%
select * from userInfo where name like ‘%mongo%’;
10、查询name中以mongo开头的
db.userInfo.find({name: /^mongo/});
select * from userInfo where name like ‘mongo%’;
11、查询指定列name、age数据
db.userInfo.find({}, {name: 1, age: 1});
相当于:select name, age from userInfo;
当然name也可以用true或false,当用ture的情况下河name:1效果一样,如果用false就是排除name,显示name以外的列信息。
12、查询指定列name、age数据, age > 25
db.userInfo.find({age: {$gt: 25}}, {name: 1, age: 1});
相当于:select name, age from userInfo where age > 25;
13、按照年龄排序
升序:db.userInfo.find().sort({age: 1});
降序:db.userInfo.find().sort({age: -1});
14、查询name = zhangsan, age = 22的数据
db.userInfo.find({name: 'zhangsan', age: 22});
相当于:select * from userInfo where name = ‘zhangsan’ and age = ‘22’;
15、查询前5条数据
db.userInfo.find().limit(5);
相当于:select top 5* from userInfo;
16、查询10条以后的数据
db.userInfo.find().skip(10);
相当于:select * from userInfo where id not in (
select top 10 * from userInfo
);
17、查询在5-10之间的数据
db.userInfo.find().limit(10).skip(5);
可用于分页,limit是pageSize,skip是第几页*pageSize
18、or与 查询
db.userInfo.find({$or: [{age: 22}, {age: 25}]});
相当于:select * from userInfo where age = 22 or age= 25;
19、查询第一条数据
db.userInfo.findOne();
相当于:select top 1* from userInfo;
db.userInfo.find().limit(1);
20、查询某个结果集的记录条数
db.userInfo.find({age: {$gte: 25}}).count();
相当于:select count(*) from userInfo where age >= 20;
21、按照某列进行排序
db.userInfo.find({sex: {$exists: true}}).count();
相当于:select count(sex) from userInfo;
Ø 索引
1、创建索引
db.userInfo.ensureIndex({name: 1});
db.userInfo.ensureIndex({name: 1, ts: -1});
2、查询当前聚集集合所有索引
db.userInfo.getIndexes();
3、查看总索引记录大小
db.userInfo.totalIndexSize();
4、读取当前集合的所有index信息
db.users.reIndex();
5、删除指定索引
db.users.dropIndex("name_1");
6、删除所有索引索引
db.users.dropIndexes();
Ø 修改、添加、删除集合数据
1、添加
db.users.save({name: ‘zhangsan’, age: 25, sex: true});
添加的数据的数据列,没有固定,根据添加的数据为准
2、修改
db.users.update({age: 25}, {$set: {name: 'changeName'}}, false, true);
相当于:update users set name = ‘changeName’ where age = 25;
db.users.update({name: 'Lisi'}, {$inc: {age: 50}}, false, true);
相当于:update users set age = age + 50 where name = ‘Lisi’;
db.users.update({name: 'Lisi'}, {$inc: {age: 50}, $set: {name: 'hoho'}}, false, true);
相当于:update users set age = age + 50, name = ‘hoho’ where name = ‘Lisi’;
3、删除
db.users.remove({age: 132});
4、查询修改删除
db.users.findAndModify({
query: {age: {$gte: 25}},
sort: {age: -1},
update: {$set: {name: 'a2'}, $inc: {age: 2}},
remove: true
});
db.runCommand({ findandmodify : "users",
query: {age: {$gte: 25}},
sort: {age: -1},
update: {$set: {name: 'a2'}, $inc: {age: 2}},
remove: true
});
update 或 remove 其中一个是必须的参数; 其他参数可选。
参数
详解
默认值
query
查询过滤条件
{}
sort
如果多个文档符合查询过滤条件,将以该参数指定的排列方式选择出排在首位的对象,该对象将被操作
{}
remove
若为true,被选中对象将在返回前被删除
N/A
update
一个 修改器对象
N/A
new
若为true,将返回修改后的对象而不是原始对象。在删除操作中,该参数被忽略。
false
fields
参见Retrieving a Subset of Fields (1.5.0+)
All fields
upsert
创建新对象若查询结果为空。 示例 (1.5.4+)
false
Ø 语句块操作1、简单Hello World
print("Hello World!");
这种写法调用了print函数,和直接写入"Hello World!"的效果是一样的;
2、将一个对象转换成json
tojson(new Object());
tojson(new Object('a'));
3、循环添加数据
> for (var i = 0; i< 30; i++) {
... db.users.save({name: "u_" +i, age: 22 + i, sex:i % 2});
... };
这样就循环添加了30条数据,同样也可以省略括号的写法
> for (var i = 0; i< 30; i++) db.users.save({name: "u_" +i, age: 22 + i, sex:i % 2});
也是可以的,当你用db.users.find()查询的时候,显示多条数据而无法一页显示的情况下,可以用it查看下一页的信息;
4、find 游标查询
>var cursor = db.users.find();
> while (cursor.hasNext()) {
printjson(cursor.next());
}
这样就查询所有的users信息,同样可以这样写
var cursor = db.users.find();
while (cursor.hasNext()) { printjson(cursor.next); }
同样可以省略{}号
5、forEach迭代循环
db.users.find().forEach(printjson);
forEach中必须传递一个函数来处理每条迭代的数据信息
6、将find游标当数组处理
var cursor = db.users.find();
cursor[4];
取得下标索引为4的那条数据
既然可以当做数组处理,那么就可以获得它的长度:cursor.length();或者cursor.count();
那样我们也可以用循环显示数据
for (var i = 0, len = c.length();i < len; i++) printjson(c[i]);
7、将find游标转换成数组
> var arr = db.users.find().toArray();
> printjson(arr[2]);
用toArray方法将其转换为数组
8、定制我们自己的查询结果
只显示age <= 28的并且只显示age这列数据
db.users.find({age: {$lte: 28}}, {age: 1}).forEach(printjson);
db.users.find({age: {$lte: 28}}, {age: true}).forEach(printjson);
排除age的列
db.users.find({age: {$lte: 28}}, {age: false}).forEach(printjson);
9、forEach传递函数显示信息
db.things.find({x:4}).forEach(function(x) {print(tojson(x));});
上面介绍过forEach需要传递一个函数,函数会接受一个参数,就是当前循环的对象,然后在函数体重处理传入的参数信息。
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- MongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- mongoDB 入门指南、示例
- 防止jQuery Load使用缓存
- Qt元对象系统
- sim, uim, usim
- wstring 和 wchar_t* 转换(处理const)
- 51CTO技术资料
- mongoDB 入门指南、示例
- 二层交换机和三层交换机有什么区别?
- FLex中的this关键字带来的困扰
- Hadoop集群安装 (4) 配置JobTracker_conf/mapred-site.xml
- Google Map Api 谷歌地图接口整理
- mysql数据库优化的思维导图
- 【MongoDB for Java】Java操作MongoDB
- 2012新的开始
- linux查看网卡驱动