Android onMeasure方法介绍
来源:互联网 发布:淘宝的ip地址 编辑:程序博客网 时间:2024/05/19 12:14
onMeasure方法在控件的父元素正要放置它的子控件时调用.它会问一个问题,“你想要用多大地方啊?”,然后传入两个参数——widthMeasureSpec和heightMeasureSpec.
它们指明控件可获得的空间以及关于这个空间描述的元数据.
比返回一个结果要好的方法是你传递View的高度和宽度到setMeasuredDimension方法里.
接下来的代码片段给出了如何重写onMeasure.注意,调用的本地空方法是来计算高度和宽度的.它们会译解widthHeightSpec和heightMeasureSpec值,并计算出合适的高度和宽度值.
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
int measuredHeight = measureHeight(heightMeasureSpec);
int measuredWidth = measureWidth(widthMeasureSpec);
setMeasuredDimension(measuredHeight, measuredWidth);
}
private int measureHeight(int measureSpec) {
// Return measured widget height.
}
private int measureWidth(int measureSpec) {
// Return measured widget width.
}
边界参数——widthMeasureSpec和heightMeasureSpec ,效率的原因以整数的方式传入。在它们使用之前,首先要做的是使用MeasureSpec类的静态方法getMode和getSize来译解,如下面的片段所示:
java代码:
int specMode = MeasureSpec.getMode(measureSpec);
int specSize = MeasureSpec.getSize(measureSpec);
复制代码
依据specMode的值,如果是AT_MOST,specSize 代表的是最大可获得的空间;如果是EXACTLY,specSize 代表的是精确的尺寸;如果是UNSPECIFIED,对于控件尺寸来说,没有任何参考意义。
当以EXACT方式标记测量尺寸,父元素会坚持在一个指定的精确尺寸区域放置View。在父元素问子元素要多大空间时,AT_MOST指示者会说给我最大的范围。在很多情况下,你得到的值都是相同的。
在两种情况下,你必须绝对的处理这些限制。在一些情况下,它可能会返回超出这些限制的尺寸,在这种情况下,你可以让父元素选择如何对待超出的View,使用裁剪还是滚动等技术。
接下来的框架代码给出了处理View测量的典型实现:
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
int measuredHeight = measureHeight(heightMeasureSpec);
int measuredWidth = measureWidth(widthMeasureSpec);
setMeasuredDimension(measuredHeight, measuredWidth);
}
private int measureHeight(int measureSpec) {
int specMode = MeasureSpec.getMode(measureSpec);
int specSize = MeasureSpec.getSize(measureSpec);
// Default size if no limits are specified.
int result = 500;
if (specMode == MeasureSpec.AT_MOST){
// Calculate the ideal size of your
// control within this maximum size.
// If your control fills the available
// space return the outer bound.
result = specSize;
}
else if (specMode == MeasureSpec.EXACTLY){
// If your control can fit within these bounds return that value.
result = specSize;
}
return result;
}
private int measureWidth(int measureSpec) {
int specMode = MeasureSpec.getMode(measureSpec);
int specSize = MeasureSpec.getSize(measureSpec);
// Default size if no limits are specified.
int result = 500;
if (specMode == MeasureSpec.AT_MOST){
// Calculate the ideal size of your control
// within this maximum size.
// If your control fills the available space
// return the outer bound.
result = specSize;
}
else if (specMode == MeasureSpec.EXACTLY){
// If your control can fit within these bounds return that value.
result = specSize;
}
return result;
}
它们指明控件可获得的空间以及关于这个空间描述的元数据.
比返回一个结果要好的方法是你传递View的高度和宽度到setMeasuredDimension方法里.
接下来的代码片段给出了如何重写onMeasure.注意,调用的本地空方法是来计算高度和宽度的.它们会译解widthHeightSpec和heightMeasureSpec值,并计算出合适的高度和宽度值.
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
int measuredHeight = measureHeight(heightMeasureSpec);
int measuredWidth = measureWidth(widthMeasureSpec);
setMeasuredDimension(measuredHeight, measuredWidth);
}
private int measureHeight(int measureSpec) {
// Return measured widget height.
}
private int measureWidth(int measureSpec) {
// Return measured widget width.
}
边界参数——widthMeasureSpec和heightMeasureSpec ,效率的原因以整数的方式传入。在它们使用之前,首先要做的是使用MeasureSpec类的静态方法getMode和getSize来译解,如下面的片段所示:
java代码:
int specMode = MeasureSpec.getMode(measureSpec);
int specSize = MeasureSpec.getSize(measureSpec);
复制代码
依据specMode的值,如果是AT_MOST,specSize 代表的是最大可获得的空间;如果是EXACTLY,specSize 代表的是精确的尺寸;如果是UNSPECIFIED,对于控件尺寸来说,没有任何参考意义。
当以EXACT方式标记测量尺寸,父元素会坚持在一个指定的精确尺寸区域放置View。在父元素问子元素要多大空间时,AT_MOST指示者会说给我最大的范围。在很多情况下,你得到的值都是相同的。
在两种情况下,你必须绝对的处理这些限制。在一些情况下,它可能会返回超出这些限制的尺寸,在这种情况下,你可以让父元素选择如何对待超出的View,使用裁剪还是滚动等技术。
接下来的框架代码给出了处理View测量的典型实现:
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
int measuredHeight = measureHeight(heightMeasureSpec);
int measuredWidth = measureWidth(widthMeasureSpec);
setMeasuredDimension(measuredHeight, measuredWidth);
}
private int measureHeight(int measureSpec) {
int specMode = MeasureSpec.getMode(measureSpec);
int specSize = MeasureSpec.getSize(measureSpec);
// Default size if no limits are specified.
int result = 500;
if (specMode == MeasureSpec.AT_MOST){
// Calculate the ideal size of your
// control within this maximum size.
// If your control fills the available
// space return the outer bound.
result = specSize;
}
else if (specMode == MeasureSpec.EXACTLY){
// If your control can fit within these bounds return that value.
result = specSize;
}
return result;
}
private int measureWidth(int measureSpec) {
int specMode = MeasureSpec.getMode(measureSpec);
int specSize = MeasureSpec.getSize(measureSpec);
// Default size if no limits are specified.
int result = 500;
if (specMode == MeasureSpec.AT_MOST){
// Calculate the ideal size of your control
// within this maximum size.
// If your control fills the available space
// return the outer bound.
result = specSize;
}
else if (specMode == MeasureSpec.EXACTLY){
// If your control can fit within these bounds return that value.
result = specSize;
}
return result;
}
- Android onMeasure方法介绍
- Android onMeasure方法介绍
- Android onMeasure方法介绍
- Android onMeasure方法介绍
- Android onMeasure方法介绍
- Android onMeasure,onFocusChanged方法介绍
- Android 自定义view 和 onMeasure方法介绍
- Android 自定义view 和 onMeasure方法介绍
- android onmeasure介绍
- android onmeasure介绍
- Android的View绘制过程,onMeasure()方法介绍
- Android View onMeasure 方法
- Android View.onMeasure方法
- Android的onMeasure方法
- android 的onMeasure方法
- Android onMeasure() 方法翻译
- Android onMeasure方法
- Android自定义View-onMeasure介绍
- Mozilla推出‘Pancake’,挑战Web传统
- App开发者需要了解的2012五大应用趋势
- Twitter发布Bootstaps 2.0,添加响应设计特性
- 区域医疗 SOA 解决方案,第 2 部分
- poj 2503 Babelfish【trie】
- Android onMeasure方法介绍
- 区域医疗 SOA 解决方案,第 4 部分
- PHP版本选择讲解:VC6与VC9,Thread Safe与None-Thread Safe等的选择
- 区域医疗 SOA 解决方案,第 5 部分
- 微软正式发布Kinect for Windows
- windowsSDK贪吃蛇
- OpenVPN单线程原因
- android 程序安装完成时,程序启动两次的问题解决办法。
- VirtualBox 学习 - 高级课题3 - CPU热插拔,PCI passthrough