这一步是难点
就像学习使用筷子一样
用的好差 决定你将来吃的饱不饱
1--------MDK开发实例
http://wenku.baidu.com/view/0fc26329bd64783e09122b65.html 官方固件庫
http://wenku.baidu.com/view/8d3aa300cc175527072208cf.html 官方固件庫
http://wenku.baidu.com/view/5eaa807da26925c52cc5bf10.html 用mdk自帶庫
2--------图片教程
http://bbs.ednchina.com/BLOG_ARTICLE_3000296.HTM
3--------又教程
http://www.eefocus.com/yuanxihua/blog/09-10/178901_ea159.html
9G-STM32 MDK-ARM开发过程简介
一，准备MDK-ARM+JLINK+STM32软件包
1，在http://www.mcu123.com/news/Soft/embsof/arm/200908/505.html
下载RealView MDK-ARM 3.80a(MDK-ARM V3.80a,MDK3.80a)版本
mdk380a_mcu123.rar
http://esoft.mcu123.com/MCU123_temp_0080309@/arm/mdk380a_mcu123.rar
(注册机自行查找，安装过程略)
2，在http://www.segger.com/cms/jlink-software.html
下载Software and documentation pack V4.08l软件
Setup_JLinkARM_V408l.zip
http://www.segger.com/cms/admin/uploads/userfiles/file/J-Link/Setup_JLinkARM_V408l.zip
(JLINK自行购买，安装过程略)
3，在http://www.st.com/mcu/familiesdocs-110.html
下载ARM-based 32-bit MCU STM32F10xxx standard peripheral library
stm32f10x_stdperiph_lib.zip
http://www.st.com/stonline/products/support/micro/files/stm32f10x_stdperiph_lib.zip
二，建立STM32工程
1，解压stm32f10x_stdperiph_lib.zip软件包，把其中的“Libraries”和“Project”文件夹复制到“D:\works\EK-STM3210E-MDK\”，
在“D:\works\EK-STM3210E-MDK\”下建立“Drivers”、“Include”和“Source”空文件夹，在“D:\works\lccd-1.0.0\Project”
下建立“Stm32f103”空文件夹，把“Project\Template”下的C文件复制到“Source”和H文件复制到“Include”；
2，在Keil uVision3菜单中“Project”->“New uVision Project”打开“Create New Project”窗口，选择项目工程存储路径
“D:\works\EK-STM3210E-MDK\Project\Stm32f103”填写项目文件名“stm32.uv2"，选择“保存”后自动打开“Select Device for
Target "Target 1"”窗口，在左面“CPU”页面下的“Data base”点开“STMicroelectronics”前面的“+”选择上“STM32F103ZD”
点击“OK”再确定“是”；
3，在Keil uVision3菜单中“Project”->“New Project Workspace”打开“Create New Multi Project Workspace”窗口，选择项目
工作区存储路径“D:\works\EK-STM3210E-MDK\Project\Stm32f103”填写工作区文件名“stm32.mpw"，点击“保存”打开
“Create New Multi-Project Workspace”窗口，点击插入项目，然后选择到刚才建立的“stm32.uv2"再点“OK”“确定”
即可建立一个新的 Workspace；
4，在Keil uVision3菜单中“Project”->“Manage”选择“Project "stm32" Components”打开“Components Environment and Books”窗口，
把“Target 1”改为“EK-STM3210E”把“Source Group 1”以为“BOOT”点击“OK”；并在“Groups”下建立“SRC”，“DRV”，“SRC”，
“INC”，“SDRV”等 目录；
5，在Keil uVision3的左面“Workspace”窗口下面的“BOOT”上右击鼠标，选择“Add Files to Group "BOOT"”选择上文件
“D:\works\EK-STM3210E-MDK\Libraries\CMSIS\Core\CM3”文件夹下的“core_cm3.c”和“system_stm32f10x.c”文件，和
D:\works\EK-STM3210E-MDK\Libraries\CMSIS\Core\CM3\startup\arm文件夹下的“startup_stm32f10x_hd.s”后点击“CLOSE”退出；
6，在Keil uVision3的左面“Workspace”窗口下面的“SDRV”上右击鼠标，选择“Add Files to Group "SDRV"”选择上文件
“D:\works\EK-STM3210E-MDK\Libraries\STM32F10x_StdPeriph_Driver\src”文件夹下的所有C文件后点击“CLOSE”退出；
7，在Keil uVision3的左面“Workspace”窗口下面的“SRC”上右击鼠标，选择“Add Files to Group "SRC"”选择上文件
“D:\works\EK-STM3210E-MDK\Source”文件夹下的“main.c”和“stm32f10x_it.c”文件后点击“CLOSE”退出；
8，在Keil uVision3的左面“Workspace”窗口下面的“DRV”上右击鼠标，选择“Add Files to Group "DRV"”选择上文件
“D:\works\EK-STM3210E-MDK\Source”文件夹下的“serial.c”文件后点击“CLOSE”退出；
三，配置STM32工程
在Keil uVision3的左面“Workspace”窗口下面的“EK-STM3210E”右击鼠标，选择“Options for Target "EK-STM3210E"”窗口；
1，在页面“Device”中选择上“STMicroelectronics”下面的STM32F103ZD”，
在页面“TarGet”中选择上“USE microLIB”；
2，在页面“Output”中选择上“Select Folder for Objects...”，在文件夹选择框中指定到路径：
D:\works\EK-STM3210E-MDK\Project\Stm32f103\obj 后点击“OK”；并勾选上Create HEX File，
产生“Debug information”浏览“Browse information”;
3，在页面“Listing”中选择上“Select Folder for Listing...”，在文件夹选择框中指定到路径：
D:\works\EK-STM3210E-MDK\Project\Stm32f103\lst 后点击“OK”；并勾选上C Compiler Listing
和 C Preprocessor Listing (看看自己是否需要)；
4，在页面“C/C++”中的“Include Paths ”，中添加：
..\..\Libraries\STM32F10x_StdPeriph_Driver\inc
..\..\Libraries\CMSIS\Core\CM3
..\..\Include
在页面“C/C++”中的“Preprocessor Symbols”，中添加：
USE_STDPERIPH_DRIVER, USE_FULL_ASSERT, STM32F10X_HD,USE_STM3210C_EVAL
5，在页面“ASM”中的“Include Paths ”，中添加：
..\..\Libraries\STM32F10x_StdPeriph_Driver\inc
..\..\Libraries\CMSIS\Core\CM3
..\..\Include
在页面“ASM”中的“Preprocessor Symbols”，中添加：
USE_STDPERIPH_DRIVER, USE_FULL_ASSERT, STM32F10X_HD,USE_STM3210C_EVAL6，在页面“Debug”中选择右边的硬件仿真功能的“Cortex-M3 J-LINK”，并点开右面的“Settings”配置页面，选择SW接口并把速度改成2M；
在“Flash Download”的编程算法选择上“STM32F10x High-density Flash”;
7，在页面“Utlites”中硬件FLASH编程工具“Cortex-M3 J-LINK”，并点开右面的“Settings”配置页面，选择SW接口并把速度改成2M；
在“Flash Download”的编程算法选择上“STM32F10x High-density Flash”;
四，修改STM32工程
(待续)
附件：
1,serial.c 文件
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
#include "stm32f10x_conf.h"
#include
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
USART_InitTypeDef USART_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
void UART_Configuration(void)
{
/* Enable USART1 clocks */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_USART1, ENABLE);
/* Configure USART1_Tx as alternate function push-pull */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
/* Configure USART1_Rx as input floating */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStructure);
/* USARTx configured as follow:
- BaudRate = 115200 baud
- Word Length = 8 Bits
- One Stop Bit
- No parity
- Hardware flow control disabled (RTS and CTS signals)
- Receive and transmit enabled
*/
USART_InitStructure.USART_BaudRate = 115200;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
// STM_EVAL_COMInit(COM1, &USART_InitStructure);
/* Configure the USARTx */
USART_Init(USART1, &USART_InitStructure);
/* Enable the USARTx */
USART_Cmd(USART1, ENABLE);
}
/**
* @brief Retargets the C library printf function to the USART.
* @param None
* @retval None
*/
int fputc(int ch, FILE *f)
{
/* Place your implementation of fputc here */
/* e.g. write a character to the USART */
USART_SendData(USART1, (uint8_t) ch);
/* Loop until the end of transmission */
while(USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET)
{}
return ch;
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t* file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
printf("Wrong parameters value: file %s on line %d\r\n", file, line);
/* Infinite loop */
while (1)
{
}
}
#endif
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
2,main.c文件
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
#include "stm32f10x_conf.h"
#include
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
extern void UART_Configuration(void);
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/* Setup STM32 system (clock, PLL and Flash configuration) */
SystemInit();
UART_Configuration();
/* Output a message on Hyperterminal using printf function */
printf("\n\r\n\r\n\r\n\r");
printf("*** STM32-MDK V1.0 Build by yuanxihua@21cn.com on ("__DATE__ " - " __TIME__ ")\n\r");
printf("*** STM32-MDK V1.0 Rebooting ...\n\r");
/* Add your application code here
*/
/* Infinite loop */
while (1)
{
}
}
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
