编译 /home/nzm/dvsdk_3_00_02_44/codec_engine_2_24/examples/ti/sdo/ce/examples/apps/video_copy 【part2】
来源：互联网 发布：windows笔记本电脑 编辑：程序博客网 时间：2024/05/16 05:54
关键是设置
/home/nzm/dvsdk_3_00_02_44/codec_engine_2_24/examples
里的
xdcpaths.mak文件
设置好之后，先到
/home/nzm/dvsdk_3_00_02_44/codec_engine_2_24/examples/ti/sdo/ce/examples/servers/all_codecs
make
生成文件在bin里
然后去到
/home/nzm/dvsdk_3_00_02_44/codec_engine_2_24/examples/ti/sdo/ce/examples/apps/video_copy里面make
生成文件在bin里
最后的xdcpaths.mak文件内容为：
#
# Copyright (c) 2009, Texas Instruments Incorporated
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# * Neither the name of Texas Instruments Incorporated nor the names of
# its contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#
# ======== xdcpaths.mak ========
# definition of XDC paths and commands
#
# This makefile constructs the "search path" for the XDCtools where it finds
# numerous components and packages needed to build Codec Engine examples and
# programs. It also assigns various toolchain locations. See
# build_instuctions.html for general details about this file.
#
# USER NOTE:
# 1) you must specify various <component>_INSTALL_DIRs directores below to
# reflect your installation, where <component> is CE for Codec Engine,
# BIOS for DSP/BIOS, etc.
# 2) you must specify compiler path and name in CGTOOLS_* variables below
# 3) you can remove some of the devices from the "DEVICES" list and/or remove
# some of the types of binaries from the "PROGRAMS" list and/or remove
# some of the OS runtime environments from the "GPPOS" list to reduce
# the build time (and possibly avoid checking for presence of a component
# you don't need)
# (Optional) Remove from this list the devices you're not interested in building
#
# Note, this is a space-delimited list.
DEVICES := OMAP3530
# (Optional) remove from this list the GPP OS's you're not interested in
# building. In most cases, you'll likely only leave one, as WinCE users don't
# need Linux, and Linux users don't need WinCE (and probably only want _either_
# GCC or uClibc, but not both)
#
# Note, this is a space-delimited list.
GPPOS := LINUX_GCC
#WINCE
# (Optional) Remove from the list the types of programs you're not
# interested in building:
#
# APP_CLIENT -- ARM client for codecs running on the DSP, on dual-CPU systems
# DSP_SERVER -- DSP server with the codecs, running on the DSP, on dual-CPUs
# APP_LOCAL -- Client+codecs in a single program, whether ARM only or DSP only
#
# Note, this is a space-delimited list.
PROGRAMS := APP_CLIENT DSP_SERVER APP_LOCAL
# (Mandatory) Specify where various components are installed.
# What you need depends on what device(s) you're building for, what type(s) of
# programs you are building for, and whether your Codec Engine distribution
# includes a "cetools" directory. The legend:
# CE - Codec Engine (needed for ARM and for DSP)
# XDC - XDC tools (ARM and DSP)
# BIOS - DSP/BIOS (DSP only)
# DSPLINK - Arm<->DSP communication software (ARM + DSP)
# XDAIS - XDAIS header files (ARM and DSP)
# FC - Framework Components, various resource managers (ARM and DSP)
# CMEM - Contiguous memory manager (ARM only)
# BIOSUTILS - DSP BIOS Utilities (including CPU load monitor) (DSP only)
# EDMA3_LLD - EDMA3 Low Level Driver and resource manager (ARM and DSP)
# LPM - Local Power Manager (ARM + DSP)
#
# you can omit directory specifications for the components you think you don't
# need (will be warned if you do, based on your DEVICES + PROGRAMS selection
# above).
CE_INSTALL_DIR := /home/nzm/dvsdk_3_00_02_44/codec_engine_2_24
XDC_INSTALL_DIR := /home/nzm/dvsdk_3_00_02_44/xdctools_3_15_01_59
BIOS_INSTALL_DIR := /home/nzm/dvsdk_3_00_02_44/bios_5_33_06
DSPLINK_INSTALL_DIR := /home/nzm/dvsdk_3_00_02_44/dsplink_1_61_03/packages
# no need to specify the installation directories below if your CE installation
# has cetools/ directory on top
#
# Note, CMEM_INSTALL_DIR is a misnomer - it should be LINUXUTILS_INSTALL_DIR
# but we've got an existing user base. Need to fix this later.
USE_CETOOLS_IF_EXISTS := 1
XDAIS_INSTALL_DIR := /home/nzm/dvsdk_3_00_02_44/xdais_6_24
FC_INSTALL_DIR := /home/nzm/dvsdk_3_00_02_44/framework_components_2_24
CMEM_INSTALL_DIR := /home/nzm/dvsdk_3_00_02_44/linuxutils_2_24_02
#WINCEUTILS_INSTALL_DIR:= /home/nzm/dvsdk_3_00_02_44/codec_engine_2_24/xdoc/ti/sdo/winceutils
BIOSUTILS_INSTALL_DIR := /home/nzm/dvsdk_3_00_02_44/biosutils_1_01_00
EDMA3_LLD_INSTALL_DIR := /home/nzm/dvsdk_3_00_02_44/edma3_lld_1_10_00_01
LPM_INSTALL_DIR := /home/nzm/dvsdk_3_00_02_44/local_power_manager_1_24
# (Mandatory) specify correct compiler paths and names for the architectures
# you'll be building for:
# compiler path and name for Montavista Arm 9 toolchain. NOTE: make sure the
# directory you specify has a "bin" subdirectory
CGTOOLS_V5T := /home/nzm/toolchain/arm-2008q1
CC_V5T := bin/arm-none-linux-gnueabi-gcc
CGTARGET := gnu.targets.arm.GCArmv5T
# compiler path and name for uClibc toolchain. NOTE: make sure the
# directory you specify has a "bin" subdirectory
CGTOOLS_UCARM9 := /usr/local/arm/4.3.2
CC_UCARM9 := bin/arm-linux-gcc
# WinCE toolchain.
#WINCE_ROOTDIR := C:/WINCE600
#WINCE_PROJECTROOT := $(WINCE_ROOTDIR)/_your_ProjectRoot_/Wince600/TI_EVM_3530_ARMV4I
# compiler path and name for TI C64x toolchain. NOTE: make sure the
# directory you specify has a "bin" subdirectory
CGTOOLS_C64P := /home/nzm/dvsdk_3_00_02_44/cg6x_6_0_16
#CC_C64P := bin/cl6x
# compiler path and name for TI C674 toolchain. NOTE: make sure the
# directory you specify has a "bin" subdirectory
CGTOOLS_C674 := /home/nzm/dvsdk_3_00_02_44/cg6x_6_0_16
#CC_C674 := bin/cl6x
# compiler path and name for Linux 86 toolchain. NOTE: make sure the
# directory you specify has a "bin" subdirectory
CGTOOLS_LINUX86 := /usr
#CC_LINUX86 := bin/gcc
# -----------------------------------------------------------------------------
# Most users have no need to modify anything below this line.
# -----------------------------------------------------------------------------
# If we're a subcomponent, allow larger product settings to override our
# defaults. The variable $(RULES_MAKE) can be overridden on the 'make'
# command-line if the location below is not correct (for example, if you
# want to use a Rules.make from some other location.
RULES_MAKE := $(CE_INSTALL_DIR)/../Rules.make
ifneq ($(wildcard $(RULES_MAKE)),)
include $(RULES_MAKE)
endif
# Note, some good defensive programming here could be to ensure $(DEVICES) and
# $(PROGRAMS) - and others! - don't contain any space characters
#
# Set XDCARGS to some of the variables above. xdcrules.mak will pass this
# variable to the XDC build engine... which will load config.bld... which will
# extract these variables and use them to determine what to build and which
# toolchains to use.
#
# Note that not all of these variables need to be set to something valid.
# Unfortunately, since these vars are unconditionally assigned, your build line
# will be longer and more noisy than necessary (e.g., it will include CC_V5T
# assignment even if you're just building for WinCE. While benign, it is
# annoying. In future releases, we'll clean up this XDCARGS assignment and
# only include the vars that are required.
#
# Some background is here:
# http://rtsc.eclipse.org/docs-tip/Command_-_xdc#Environment_Variables
#
XDCARGS= DEVICES=\"$(DEVICES)\" \
PROGRAMS=\"$(PROGRAMS)\" \
GPPOS=\"$(GPPOS)\" \
CGTOOLS_V5T=$(CGTOOLS_V5T) \
CC_V5T=$(CC_V5T) \
CGTOOLS_C64P=$(CGTOOLS_C64P) \
CGTOOLS_C674=$(CGTOOLS_C674) \
CGTOOLS_UCARM9=$(CGTOOLS_UCARM9) \
WINCE_ROOTDIR=$(WINCE_ROOTDIR) \
WINCE_PROJECTROOT=$(WINCE_PROJECTROOT) \
CGTOOLS_LINUX86=$(CGTOOLS_LINUX86)
# -----------------------------------------------------------------------------
# Utility variables - useful for over-riding these repos from the cmd line
CE_REPO ?= $(CE_INSTALL_DIR)/packages
CETOOLS_REPO ?= $(CE_INSTALL_DIR)/cetools/packages
# figure out what categories of devices we are to build for
ifneq (,$(findstring DM6446,$(DEVICES)))
DEVICES_DUALCPU := 1
endif
ifneq (,$(findstring DM6467,$(DEVICES)))
DEVICES_DUALCPU := 1
endif
ifneq (,$(findstring OMAP2530,$(DEVICES)))
DEVICES_DUALCPU := 1
endif
ifneq (,$(findstring OMAP3530,$(DEVICES)))
DEVICES_DUALCPU := 1
endif
ifneq (,$(findstring SDP3430,$(DEVICES)))
DEVICES_DUALCPU := 1
endif
ifneq (,$(findstring OMAPL137,$(DEVICES)))
DEVICES_DUALCPU := 1
endif
# Determine which components are necessary based on settings above
# Note, this ultimately just sets up the XDCPATH, and provides ease-of-use
# errors when we can catch them here, rather than progress further downstream
# and get [stranger] errors later
# All configurations require CE, XDC, XDAIS and FC
REQUIRE_CE := 1
REQUIRE_XDC := 1
REQUIRE_XDAIS := 1
REQUIRE_FC := 1
ifneq (,$(findstring DM6446,$(DEVICES)))
ifneq (, $(findstring APP_CLIENT, $(PROGRAMS) ))
REQUIRE_LINK := 1
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_LINUXUTILS := 1
REQUIRE_CGTOOLS_V5T := 1
endif
ifneq (, $(findstring LINUX_UCLIBC, $(GPPOS) ))
REQUIRE_LINUXUTILS := 1
REQUIRE_CGTOOLS_UCARM9 := 1
endif
ifneq (, $(findstring WINCE, $(GPPOS) ))
REQUIRE_WINCEUTILS := 1
REQUIRE_CGTOOLS_WINCE := 1
endif
endif
ifneq (, $(findstring APP_LOCAL, $(PROGRAMS) ))
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_LINUXUTILS := 1
REQUIRE_CGTOOLS_V5T := 1
endif
ifneq (, $(findstring LINUX_UCLIBC, $(GPPOS) ))
REQUIRE_LINUXUTILS := 1
REQUIRE_CGTOOLS_UCARM9 := 1
endif
ifneq (, $(findstring WINCE, $(GPPOS) ))
REQUIRE_WINCEUTILS := 1
REQUIRE_CGTOOLS_WINCE := 1
endif
endif
ifneq (, $(findstring DSP_SERVER, $(PROGRAMS) ))
REQUIRE_LINK := 1
REQUIRE_BIOS := 1
REQUIRE_CGTOOLS_C64P := 1
endif
endif
ifneq (,$(findstring DM6467,$(DEVICES)))
ifneq (, $(findstring APP_CLIENT, $(PROGRAMS) ))
REQUIRE_LINK := 1
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_CGTOOLS_V5T := 1
REQUIRE_LINUXUTILS := 1
endif
ifneq (, $(findstring LINUX_UCLIBC, $(GPPOS) ))
REQUIRE_CGTOOLS_UCARM9 := 1
REQUIRE_LINUXUTILS := 1
endif
endif
ifneq (, $(findstring APP_LOCAL, $(PROGRAMS) ))
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_CGTOOLS_V5T := 1
REQUIRE_LINUXUTILS := 1
endif
ifneq (, $(findstring LINUX_UCLIBC, $(GPPOS) ))
REQUIRE_CGTOOLS_UCARM9 := 1
REQUIRE_LINUXUTILS := 1
endif
endif
ifneq (, $(findstring DSP_SERVER, $(PROGRAMS) ))
REQUIRE_LINK := 1
REQUIRE_BIOS := 1
REQUIRE_CGTOOLS_C64P := 1
endif
endif
ifneq (,$(findstring DM355,$(DEVICES)))
ifneq (, $(findstring APP_LOCAL, $(PROGRAMS) ))
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_CGTOOLS_V5T := 1
REQUIRE_LINUXUTILS := 1
endif
ifneq (, $(findstring LINUX_UCLIBC, $(GPPOS) ))
REQUIRE_CGTOOLS_UCARM9 := 1
REQUIRE_LINUXUTILS := 1
endif
endif
endif
ifneq (,$(findstring DM357,$(DEVICES)))
ifneq (, $(findstring APP_LOCAL, $(PROGRAMS) ))
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_CGTOOLS_V5T := 1
REQUIRE_LINUXUTILS := 1
endif
ifneq (, $(findstring LINUX_UCLIBC, $(GPPOS) ))
REQUIRE_CGTOOLS_UCARM9 := 1
REQUIRE_LINUXUTILS := 1
endif
endif
endif
ifneq (,$(findstring DM365,$(DEVICES)))
ifneq (, $(findstring APP_LOCAL, $(PROGRAMS) ))
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_CGTOOLS_V5T := 1
REQUIRE_LINUXUTILS := 1
endif
ifneq (, $(findstring LINUX_UCLIBC, $(GPPOS) ))
REQUIRE_CGTOOLS_UCARM9 := 1
REQUIRE_LINUXUTILS := 1
endif
endif
endif
ifneq (,$(findstring DM6437,$(DEVICES)))
ifneq (, $(findstring APP_LOCAL, $(PROGRAMS) ))
REQUIRE_BIOS := 1
REQUIRE_CGTOOLS_C64P := 1
endif
endif
ifneq (,$(findstring DM648,$(DEVICES)))
ifneq (, $(findstring APP_LOCAL, $(PROGRAMS) ))
REQUIRE_BIOS := 1
REQUIRE_CGTOOLS_C64P := 1
endif
endif
ifneq (,$(findstring OMAP2530,$(DEVICES)))
ifneq (, $(findstring APP_CLIENT, $(PROGRAMS) ))
REQUIRE_LINK := 1
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_CGTOOLS_V5T := 1
REQUIRE_LINUXUTILS := 1
endif
ifneq (, $(findstring LINUX_UCLIBC, $(GPPOS) ))
REQUIRE_CGTOOLS_UCARM9 := 1
REQUIRE_LINUXUTILS := 1
endif
endif
ifneq (, $(findstring APP_LOCAL, $(PROGRAMS) ))
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_CGTOOLS_V5T := 1
REQUIRE_LINUXUTILS := 1
endif
ifneq (, $(findstring LINUX_UCLIBC, $(GPPOS) ))
REQUIRE_CGTOOLS_UCARM9 := 1
REQUIRE_LINUXUTILS := 1
endif
endif
ifneq (, $(findstring DSP_SERVER, $(PROGRAMS) ))
REQUIRE_LINK := 1
REQUIRE_BIOS := 1
REQUIRE_CGTOOLS_C64P := 1
endif
endif
ifneq (,$(findstring OMAP3530,$(DEVICES)))
ifneq (, $(findstring APP_CLIENT, $(PROGRAMS) ))
REQUIRE_LINK := 1
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_CGTOOLS_V5T := 1
REQUIRE_LINUXUTILS := 1
endif
ifneq (, $(findstring LINUX_UCLIBC, $(GPPOS) ))
REQUIRE_CGTOOLS_UCARM9 := 1
REQUIRE_LINUXUTILS := 1
endif
ifneq (, $(findstring WINCE, $(GPPOS) ))
REQUIRE_CGTOOLS_WINCE := 1
REQUIRE_WINCEUTILS := 1
endif
endif
ifneq (, $(findstring APP_LOCAL, $(PROGRAMS) ))
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_CGTOOLS_V5T := 1
REQUIRE_LINUXUTILS := 1
endif
ifneq (, $(findstring LINUX_UCLIBC, $(GPPOS) ))
REQUIRE_CGTOOLS_UCARM9 := 1
REQUIRE_LINUXUTILS := 1
endif
ifneq (, $(findstring WINCE, $(GPPOS) ))
REQUIRE_CGTOOLS_WINCE := 1
REQUIRE_WINCEUTILS := 1
endif
endif
ifneq (, $(findstring DSP_SERVER, $(PROGRAMS) ))
REQUIRE_LINK := 1
REQUIRE_BIOS := 1
REQUIRE_CGTOOLS_C64P := 1
endif
endif
ifneq (,$(findstring OMAPL137,$(DEVICES)))
ifneq (, $(findstring APP_CLIENT, $(PROGRAMS) ))
REQUIRE_LINK := 1
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_CGTOOLS_V5T := 1
REQUIRE_LINUXUTILS := 1
endif
ifneq (, $(findstring LINUX_UCLIBC, $(GPPOS) ))
REQUIRE_CGTOOLS_UCARM9 := 1
REQUIRE_LINUXUTILS := 1
endif
endif
ifneq (, $(findstring APP_LOCAL, $(PROGRAMS) ))
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_CGTOOLS_V5T := 1
REQUIRE_LINUXUTILS := 1
endif
ifneq (, $(findstring LINUX_UCLIBC, $(GPPOS) ))
REQUIRE_CGTOOLS_UCARM9 := 1
REQUIRE_LINUXUTILS := 1
endif
endif
ifneq (, $(findstring DSP_SERVER, $(PROGRAMS) ))
REQUIRE_LINK := 1
REQUIRE_BIOS := 1
REQUIRE_CGTOOLS_C674 := 1
endif
endif
ifneq (,$(findstring X86,$(DEVICES)))
ifneq (, $(findstring APP_LOCAL, $(PROGRAMS) ))
ifneq (, $(findstring LINUX_GCC, $(GPPOS) ))
REQUIRE_CGTOOLS_LINUX86 := 1
endif
endif
endif
# Build the XDC path from the necessary components, verifying along the way
# that the required compoments are present
XDC_PATH :=
ERRMSG = which is invalid (could not find file "$(TEST_FILE)"). Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.
# CE_INSTALL_DIR is the location of your Codec Engine.
ifeq ($(REQUIRE_CE), 1)
TEST_FILE := $(CE_REPO)/ti/sdo/ce/package.xdc
ifeq ($(wildcard $(TEST_FILE)),)
$(error CE_INSTALL_DIR is set to "$(CE_INSTALL_DIR)", $(ERRMSG))
endif
XDC_PATH := $(CE_REPO)
endif
# Add cetools to XDCPATH if 1) $(USE_CETOOLS_IF_EXISTS) is set, and
# 2) the CE distribution has "cetools/"
USING_CETOOLS := 0
ifeq ($(USE_CETOOLS_IF_EXISTS), 1)
ifneq ($(wildcard $(CETOOLS_REPO)),)
USING_CETOOLS := 1
XDC_PATH := $(CETOOLS_REPO);$(XDC_PATH)
endif
endif
ifeq ($(USING_CETOOLS),0)
# XDAIS_INSTALL_DIR is the location of your XDAIS distribution
ifeq ($(REQUIRE_XDAIS), 1)
TEST_FILE := $(XDAIS_INSTALL_DIR)/packages/ti/xdais/package.xdc
ifeq ($(wildcard $(TEST_FILE)),)
$(error XDAIS_INSTALL_DIR is set to "$(XDAIS_INSTALL_DIR)", $(ERRMSG))
endif
XDC_PATH := $(XDC_PATH);$(XDAIS_INSTALL_DIR)/packages
endif
# CMEM_INSTALL_DIR is the location of your Linux Utils distribution
ifeq ($(REQUIRE_LINUXUTILS), 1)
TEST_FILE := $(CMEM_INSTALL_DIR)/packages/ti/sdo/linuxutils/cmem/package.xdc
ifeq ($(wildcard $(TEST_FILE)),)
$(error CMEM_INSTALL_DIR is set to "$(CMEM_INSTALL_DIR)", $(ERRMSG))
endif
XDC_PATH := $(XDC_PATH);$(CMEM_INSTALL_DIR)/packages
endif
# WINCEUTILS_INSTALL_DIR is the location of your WinCE Utils distribution
ifeq ($(REQUIRE_WINCEUTILS), 1)
TEST_FILE := $(WINCEUTILS_INSTALL_DIR)/packages/ti/sdo/winceutils/cmem/package.xdc
ifeq ($(wildcard $(TEST_FILE)),)
$(error WINCEUTILS_INSTALL_DIR is set to "$(WINCEUTILS_INSTALL_DIR)", $(ERRMSG))
endif
XDC_PATH := $(XDC_PATH);$(WINCEUTILS_INSTALL_DIR)/packages
endif
# FC_INSTALL_DIR is the location of your Frameworks Components distribution
ifeq ($(REQUIRE_FC), 1)
TEST_FILE := $(FC_INSTALL_DIR)/packages/ti/sdo/fc/dskt2/package.xdc
ifeq ($(wildcard $(TEST_FILE)),)
$(error FC_INSTALL_DIR is set to "$(FC_INSTALL_DIR)", $(ERRMSG))
endif
XDC_PATH := $(XDC_PATH);$(FC_INSTALL_DIR)/packages
endif
# BIOSUTILS_INSTALL_DIR is the location of your BIOSUTILS distribution
ifeq ($(REQUIRE_BIOS), 1)
TEST_FILE := $(BIOSUTILS_INSTALL_DIR)/packages/ti/bios/utils/package.xdc
ifeq ($(wildcard $(TEST_FILE)),)
$(error BIOSUTILS_INSTALL_DIR is set to "$(BIOSUTILS_INSTALL_DIR)", $(ERRMSG))
endif
XDC_PATH := $(XDC_PATH);$(BIOSUTILS_INSTALL_DIR)/packages
endif
endif
# BIOS_INSTALL_DIR is the location of your BIOS distribution
ifeq ($(REQUIRE_BIOS), 1)
TEST_FILE := $(BIOS_INSTALL_DIR)/packages/ti/bios/package.xdc
ifeq ($(wildcard $(TEST_FILE)),)
$(error BIOS_INSTALL_DIR is set to "$(BIOS_INSTALL_DIR)", $(ERRMSG))
endif
XDC_PATH := $(XDC_PATH);$(BIOS_INSTALL_DIR)/packages
endif
# DSPLINK_INSTALL_DIR is the location of your DSPLINK distribution
ifeq ($(REQUIRE_LINK), 1)
TEST_FILE := $(DSPLINK_INSTALL_DIR)/dsplink/gpp/package.xdc
ifeq ($(wildcard $(TEST_FILE)),)
$(error DSPLINK_INSTALL_DIR is set to "$(DSPLINK_INSTALL_DIR)", $(ERRMSG))
endif
XDC_PATH := $(XDC_PATH);$(DSPLINK_INSTALL_DIR)
endif
# XDC_INSTALL_DIR is the location of your XDCTOOLS installation.
ifeq ($(REQUIRE_XDC), 1)
TEST_FILE := $(XDC_INSTALL_DIR)/packages/xdc/package.xdc
ifeq ($(wildcard $(TEST_FILE)),)
$(error XDC_INSTALL_DIR is set to "$(XDC_INSTALL_DIR)", $(ERRMSG))
endif
endif
# CGTOOLS_C64P is the location of your CGtools for C64P.
ifeq ($(REQUIRE_CGTOOLS_C64P), 1)
TEST_FILE := $(CGTOOLS_C64P)/bin/cl6x*
ifeq ($(wildcard $(TEST_FILE)),)
$(error CGTOOLS_C64P is set to "$(CGTOOLS_C64P)", $(ERRMSG))
endif
endif
# CGTOOLS_C674 is the location of your CGtools for C674.
ifeq ($(REQUIRE_CGTOOLS_C674), 1)
TEST_FILE := $(CGTOOLS_C674)/bin/cl6x*
ifeq ($(wildcard $(TEST_FILE)),)
$(error CGTOOLS_C674 is set to "$(CGTOOLS_C674)", $(ERRMSG))
endif
endif
# CGTOOLS_V5T is the location of your CGtools for GCC Linux.
ifeq ($(REQUIRE_CGTOOLS_V5T), 1)
TEST_FILE := $(CGTOOLS_V5T)/$(CC_V5T)
ifeq ($(wildcard $(TEST_FILE)),)
$(error CGTOOLS_V5T/CC_V5T is set to "$(CGTOOLS_V5T)/$(CC_V5T)", $(ERRMSG))
endif
endif
# CGTOOLS_UCARM9 is the location of your CGtools for uclibc Linux.
ifeq ($(REQUIRE_CGTOOLS_UCARM9), 1)
TEST_FILE := $(CGTOOLS_UCARM9)/$(CC_UCARM9)
ifeq ($(wildcard $(TEST_FILE)),)
$(error CGTOOLS_UCARM9/CC_UCARM9 is set to "$(CGTOOLS_UCARM9)/$(CC_UCARM9)", $(ERRMSG))
endif
endif
# CGTOOLS_LINUX86 is the location of your CGtools for X86 Linux.
ifeq ($(REQUIRE_CGTOOLS_LINUX86), 1)
TEST_FILE := $(CGTOOLS_LINUX86)/bin/gcc
ifeq ($(wildcard $(TEST_FILE)),)
$(error CGTOOLS_LINUX86 is set to "$(CGTOOLS_LINUX86)", $(ERRMSG))
endif
endif
# WINCE_PROJECTROOT is the location of your WinCE Project Root.
ifeq ($(REQUIRE_CGTOOLS_WINCE), 1)
TEST_FILE := $(WINCE_PROJECTROOT)/cesysgen/sdk/inc/stdarg.h
ifeq ($(wildcard $(TEST_FILE)),)
$(error WINCE_PROJECTROOT is set to "$(WINCE_PROJECTROOT)", $(ERRMSG))
endif
endif
# XDC_PATH is complete. Any other components you could add as
#XDC_PATH := $(XDC_PATH);$(DVSDK_INSTALL_DIR)/local_power_manager_1_24/packages
XDC_PATH :=$(XDC_PATH);/home/nzm/dvsdk_3_00_02_44/local_power_manager_1_24/packages
- 编译 /home/nzm/dvsdk_3_00_02_44/codec_engine_2_24/examples/ti/sdo/ce/examples/apps/video_copy 【part2】
- codec engine代码阅读六---CE_DIR/examples/ti/sdo/ce/examles/apps/video_copy(转)
- codec engine代码阅读六---CE_DIR/examples/ti/sdo/ce/examles/apps/video_copy
- codec engine代码阅读六---CE_DIR/examples/ti/sdo/ce/examles/apps/video_copy
- codec engine代码阅读六---CE_DIR/examples/ti/sdo/ce/examles/apps/video_copy
- codec engine代码阅读六---CE_DIR/examples/ti/sdo/ce/examles/apps/video_copy
- codec engine代码阅读六---CE_DIR/examples/ti/sdo/ce/examles/apps/video_copy
- codec engine代码阅读五---CE_DIR/examples/ti/sdo/ce/examles/servers/video_copy(转)
- codec engine代码阅读五---CE_DIR/examples/ti/sdo/ce/examles/servers/video_copy
- codec engine代码阅读五---CE_DIR/examples/ti/sdo/ce/examles/servers/video_copy
- codec engine代码阅读五---CE_DIR/examples/ti/sdo/ce/examles/servers/video_copy
- codec engine代码阅读五---CE_DIR/examples/ti/sdo/ce/examles/servers/video_copy
- codec engine代码阅读五---CE_DIR/examples/ti/sdo/ce/examles/servers/video_copy
- codec engine代码阅读五---CE_DIR/examples/ti/sdo/ce/examles/servers/video_copy下的文件
- codec engine代码阅读四---CE_DIR/examples/ti/sdo/ce/examles/codecs/videnc_copy(转)
- codec engine代码阅读四---CE_DIR/examples/ti/sdo/ce/examles/codecs/videnc_copy
- codec engine代码阅读四---CE_DIR/examples/ti/sdo/ce/examles/codecs/videnc_copy
- codec engine代码阅读四---CE_DIR/examples/ti/sdo/ce/examles/codecs/videnc_copy
- 有钱你也抽啊
- Linux设备驱动编程模型之设备篇
- 看完第一遍的概述（1）
- 在配置windows2003域控时出现“未授予用户在此计算机上的请求登录类型”错误提示的解决方法
- Windows Phone 7 开发和使用书籍大全（50多本）
- 编译 /home/nzm/dvsdk_3_00_02_44/codec_engine_2_24/examples/ti/sdo/ce/examples/apps/video_copy 【part2】
- 操作系统之并发
- AD客户机加入域，提示找不到网络路径
- 在 Windows 下安装配置 PHP + Memcache
- struts 2 locale 设置
- 使用ARM标准C库进行嵌入式应用程序开发
- DHCP自动获取ＩＰ配置
- Visual Studio 2010（.NET 4.0）中使用SQLite.NET
- 二叉查找树实现排序
