redhat Linux5 安装vsftp .
来源:互联网 发布:淘宝怎么设置优惠活动 编辑:程序博客网 时间:2024/05/17 21:28
听说vsftp是linux 上很有名,Ftp安全性是蛮重要,
1. 首先查看我的Redhat5上是否已经安装
rpm -qa| grep vsftpd
如果已经安装就会出现vstfp的版本号相关的信息,如果没有出现就是没有安装
2. 如果没有安装话,就要选择一种方式安装
可以到官方网站去下载
http://vsftpd.beasts.org
也可以用光盘安装,RedHat 5的安盘里自带的,所以我选择光盘安装
(1)先把光盘挂载到系统上:
mount /dev/cdrom /mnt
这样光盘的内容就被挂载到/mnt的设备上,现在可以通过/mnt访问光盘上的内容了
(2)在光盘上安装vsftp,并且启动vsftp
rpm -ivh vsftpd*
(3)修改启动方式,改为系统启动时,自动启动
chkconfig vsftpd on
也可以查看启动方式
chkconfig --list |grep vsftpd
只要在第2--5为on就能随机启动
(4)启动ftp
service vsftpd start
(5)连接测试
vsftp默认安装目录是:/etc/vsftpd
默认有一个ftp目录:var/ftp
vsftp默认是用允许匿名用户【anonymous】登陆,允许下载,但是不允许上传
如果连不上,可能是linux 防火墙的原因
停止防火墙:service iptables stop
开启防火墙:service iptables start
3 VsFtp的配置文件 :
/etc/vsftpd/vsftpd.conf----------主配置文件
/etc/rc.d/init.d/vsftpd ----------启动脚本
/etc/pam.d/vsftpd ----------- PAM认证文件(此文件中file=/etc/vsftpd/ftpusers字段,指明阻止访问的用户来自/etc/vsftpd/ftpusers文件中的用户)
/etc/vsftpd/ftpusers -------------禁止使用vsftpd的用户列表文件。记录不允许访问FTP服务器的用户名单,管理员可以把一些对系统安全有威胁的用户账号记录在此文件中,以免用户从FTP登录后获得大于上传下载操作的权利,而对系统造成损坏。
/etc/vsftpd/user_list-------------禁止或允许使用vsftpd的用户列表文件。这个文件中指定的用户缺省情况(即在/etc/vsftpd/vsftpd.conf中设置userlist_deny=YES)下也不能访问FTP服务器,在设置了userlist_deny=NO时,仅允许user_list中指定的用户访问FTP服务器。
/var/ftp -----------------------------匿名用户主目录;本地用户主目录为:/home/用户主目录,即登录后进入自己家目录
/var/ftp/pub------------------------匿名用户的下载目录,此目录需赋权根chmod 1777 pub(1为特殊权限,使上载后无法删除)
/etc/logrotate.d/vsftpd.log--- Vsftpd的日志文件
4 由以上可知/etc/vsftpd/vsftpd.conf为VsFTP的主要配置文件 ,可以对此文件进行修改,但是修改前最好要备份
下面对这份文件的一些细节进行介绍
# Example config file /etc/vsftpd/vsftpd.conf
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=YES(是否允许 匿名登录FTP 服务器,默认设置为YES 允许,即用户可使用用户名ftp 或anonymous 进行ftp 登录,口令为用户的E-mail 地址。如不允许匿名访问去掉前面# 并设置为NO )
# Uncomment this to allow local users to log in.
local_enable=YES(是否允许本地用户(即linux系统中的用户帐号)登录FTP服务器,默认设置为YES允许,本地用户登录后会进入用户主目录,而匿名用户登录后进入匿名用户的下载目录/var/ftp/pub;若只允许匿名用户访问,前面加上#,可 阻止本地用户访问FTP 服务器。)
# Uncomment this to enable any form of FTP write command.
write_enable=YES (是否允许本地用户对FTP服务器文件具有写权限,默认设置为 YES 允许 )
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#local_umask=022(或其它值,设置本地用户的文件掩码为缺省022,也可根据个人喜好将其设置为其他值,默认值为077)
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES(是否允许匿名用户上传文件 ,须将 write_enable=YES,默认设置为YES允许)
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES (是否允许匿名用户创建新文件夹,默认设置为 YES 允许 )
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
#dirmessage_enable=YES(是否激活目录欢迎信息功能 ,当用户用 CMD 模式首次访问服务器上某个目录时,FTP服务器将显示欢迎信息,默认情况下 , 欢迎信息是通过 该目录下的.message 文件获得的,此文件保存自定义的欢迎信息,由用户自己建立)
# Activate logging of uploads/downloads.
xferlog_enable=YES(默认值为 NO 如果启用此选项,系统将会维护记录服务器上传和下载情况的日志文件,默认情况该日志文件为/var/log/vsftpd.log, 也可以通过下面的xferlog_file选项对其进行设定。)
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES(设定 FTP服务器将启用 FTP 数据端口的连接请求 ,ftp-data 数据传输 ,21 为连接控制端口)
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!-注意,不推荐使用root用户上传文件
#chown_uploads=YES(设定是否允许改变上传文件的属主,与下面一个设定项配合使用)
#chown_username=whoever( 设置想要改变的上传文件的属主, 如果需要 , 则输入一个系统用户名, 例如可以把上传的文件都改成root 属主。whoever :任何人)
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log(设定系统维护记录FTP 服务器上传和下载情况的日志文件,/var/log/vsftpd.log 是默认的,也可以另设其它)
# If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES(如果启用此选项 ,传输日志文件将以标准 xferlog 的格式书写,该格式的日志文件默认为/var/log/xferlog, 也可以通过xferlog_file 选项对其进行设定,默认值为NO )
#dual_log_enable(如果添加并启用此选项,将生成两个相似的日志文件,默认在/var/log/xferlog 和/var/log/vsftpd.log 目录下。前者是wu_ftpd 类型的传输日志,可以利用标准日志工具对其进行分析;后者是vsftpd 类型的日志)
#syslog_enable(如果添加并启用此选项,则原本应该输出到/var/log/vsftpd.log 中的日志,将输出到系统日志中)
# You may change the default value for timing out an idle session.
#idle_session_timeout=600(设置数据传输中断间隔时间,此语句表示空闲的用户会话中断时间为600秒,即当数据传输结束后,用户连接FTP服务器的时间不应超过600秒,可以根据实际情况对该值进行修改)
# You may change the default value for timing out a data connection.
#data_connection_timeout=120(设置数据连接超时时间 ,该语句表示数据连接超时时间为 120 秒 ,可根据实际情况对其个修改)
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure(运行vsftpd 需要的非特权系统用户,缺省是nobody )
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES(如果 FTP client会下达“async ABOR ”这个指令时,这个设定才需要启用,而一般此设定并不安全,所以通常将其取消)
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES(大多数 FTP服务器都选择用 ASCII 方式传输数据 , 将#去掉就能实现用ASCII方式上传和下载文件 )
#ascii_download_enable=YES(将 #去掉就能实现用 ASCII 方式下载文件 )
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.(将#去掉可设置登录FTP服务器时显示的欢迎信息,可以修改=后的欢迎信息内容。另外如在需要设置更改目录欢迎信息的目录下创建名为.message的文件,并写入欢迎信息保存后,在进入到此目录会显示自定义欢迎信息 )
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES(可将某些特殊的email address 抵挡住。如果以anonymous 登录服务器时,会要求输入密码,也就是您的email address, 如果很讨厌某些email address ,就可以使用此设定来取消他的登录权限,但必须与下面的设置项配合)
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails(当上面的deny_email_enable=YES时,可以利用这个设定项来规定那个email address 不可登录vsftpd 服务器,此文件需用户自己创建,一行一个email address 即可!)
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES(设置为 NO 时,用户登录FTP 服务器后具有访问自己目录以外的其他文件的权限,设置为 YES 时 ,用户被锁定在自己的home目录中,vsftpd 将在下面 chroot_list_file 选项值的位置寻找 chroot_list 文件,此文件需用户建立, 再将需锁定在自己home 目录的用户列入其中,每行一个用户)
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list(此文件需自己建立, 被列入此文件的用户, 在登录后将不能切换到自己目录以外的其他目录, 由 FTP 服务器自动地 chrooted 到用户自己的home 目录下,使得chroot_list 文件中的用户不能随意转到其他用户的FTP home 目录下,从而有利于FTP 服务器的安全管理和隐私保护)
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES(是否允许递归查询, 大型站点的 FTP 服务器启用此项可以方便远程用户查询 )
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES(如果设置为YES , 则vsftpd将以独立模式运行,由vsftpd 自己监听和处理连接请求)
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd whith two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES(设定是否支持IPV6)
#pam_service_name=vsftpd(设置PAM 外挂模块提供的认证服务所使用的配置文件名 ,即/etc/pam.d/vsftpd 文件,此文件中file=/etc/vsftpd/ftpusers 字段,说明了PAM 模块能抵挡的帐号内容来自文件/etc/vsftpd/ftpusers 中)
#userlist_enable=YES/NO(此选项默认值为NO, 此时ftpusers 文件中的用户禁止登录FTP 服务器;若此项设为YES ,则user_list文件中的用户允许登录 FTP 服务器,而如果同时设置了userlist_deny=YES ,则 user_list 文件中的用户将不允许登录FTP 服务器,甚至连输入密码提示信息都没有,直接被FTP 服务器拒绝)
#userlist_deny=YES/NO(此项默认为YES ,设置是否阻扯user_list 文件中的用户登录FTP 服务器)
tcp_wrappers=YES(表明服务器使用 tcp_wrappers 作为主机访问控制方式,tcp_wrappers 可以实现linux系统中网络服务的基于主机地址的访问控制,在/etc 目录中的hosts.allow 和hosts.deny 两个文件用于设置tcp_wrappers 的访问控制,前者设置允许访问记录,后者设置拒绝访问记录。例如想限制某些主机对FTP 服务器192.168.57.2 的匿名访问,编缉/etc/hosts.allow文件,如在下面增加两行命令:vsftpd:192.168.57.1:DENY和vsftpd:192.168.57.9:DENY表明限制IP 为192.168.57.1/192.168.57.9主机访问IP 为192.168.57.2 的FTP 服务器,此时FTP 服务器虽可以PING 通,但无法连接)5 在FTP服务器的管理中无论对本地用户还是匿名用户,对于FTP服务器资源的使用都需要进行控控制,避免由于负担过大造成FTP 服务器运行异常,可以添加以下配置项对FTP客户机使用FTP服务器资源进行控制:
max_client设置项用于设置FTP 服务器所允许的最大客户端连接数,值为0 时表示不限制。例如max_client=100 表示FTP 服务器的所有客户端最大连接数不超过100 个。
max_per_ip设置项用于设置对于同一IP 地址允许的最大客户端连接数,值为0 时表示不限制。例如max_per_ip=5 表示同一IP 地址的FTP 客户机与FTP 服务器建立的最大连接数不超过5 个。
local_max_rate设置项用于设置本地用户的最大传输速率,单位为B/s ,值为0 时表示不限制。例如local_max_rate=500000 表示FTP 服务器的本地用户最大传输速率设置为500KB/s.
anon_max_rate设置项用于设置匿名用户的最大传输速率,单位为B/s, 值为0 表示不限制。例如ano_max_rate=200000 ,表示FTP 服务器的匿名用户最大传输速率设置为200KB/s.6 vsftpd.user_list文件需要与vsftpd.conf 文件中的配置项结合来实现对于vsftpd.user_list 文件中指定用户账号的访问控制:
(1)设置禁止登录的用户账号
当vsftpd.conf 配置文件中包括以下设置时,vsftpd.user_list 文件中的用户账号被禁止进行FTP 登录:
userlist_enable=YES
userlist_deny=YES
userlist_enable设置项设置使用vsftpd.user_list 文件,userlist_deny 设置为YES 表示vsftpd.user_list 文件用于设置禁止的用户账号。
(2) 设置只允许登录的用户账号
当vsftpd.conf 配置文件中包括以下设置时,只有vsftpd.user_list 文件中的用户账号能够进行FTP 登录:
userlist_enable=YES
userlist_deny=NO
userlist_enable设置项设置使用vsftpd.user_list 文件,userlist_deny 设置为NO 表示vsftpd.usre_list 文件用于设置只允许登录的用户账号,文件中未包括的用户账号被禁止FTP 登录。
userlist_deny和userlist_enable选项限制用户登录FTP服务器 (使用userlist_deny选项和user_list文件一起能有效阻止root,apache,www等系统用户登录 FTP服务器,从而保证FTP服务器的分级安全性):
Userlist_enable=YES
Ftpusers中用户允许访问
User_list中用户允许访问
Userlist_enable=NO
Ftpusers中用户禁止访问
User_list中用户允许访问
Userlist_deny=YES
Ftpusers中用户禁止访问(登录时可以看到密码输入提示,但仍无法访问)
user_list中用户禁止访问
Userlist_deny=NO
ftpusers中用户禁止访问
user_list中用户允许访问
Userlist_enable=YES并且
Userlist_deny=YES
Ftpusers中用户禁止访问
User_list中用户禁止访问(登录时不会出现密码提示,直接被服务器拒绝)
Userlist_enable=YES并且
Userlist_deny=NO
Ftpusers中用户禁止访问
User_list中用户允许访问
7 配置FTP 服务器的虚拟用户
在vsftpd 服务器中支持匿名用户,本地用户,和虚拟用户3 类用户账号,用途及区别如下:
匿名用户是名为anonymous 或ftp 的FTP 用户,匿名FTP 用户登录后将FTP 服务器中的/var/ftp 作为FTP 根目录。匿名用户通常用于提供公共文件的下载,如架设公共软件下载的FTP 服务器,所有人都可以使用匿名用户进行软件下载。
本地用户账号是FTP 服务器中的系统用户账号,使用FTP 本地用户账号登录FTP 服务器后,登录目录为本地用户的宿主目录。本地FTP 用户账号通常和Web 服务器一起提供虚拟主机服务,作为网页虚拟主机更新网页的途径。
虚拟用户账号是为了保证FTP 服务器的安全性,由vsftpd 服务器提供的非系统用户账号。虚拟用户FTP 登录后将把指定的目录作为FTP 根目录。虚拟用户与本地用户具有类似的功能,由于虚拟用户相对安全,因此正逐步替代本地用户账号。
由于虚拟用户账号具有较高的安全性,可以替代本地用户账号使用,下面是vsftpd 虚拟用户账号设置的几个步骤:
以设置miket和john 两个虚拟用户帐号为例来配置vsftpd 服务器
(1)建立虚拟用户口令库文件
建立虚拟用户的口令文件,文件中奇数行设置虚拟用户的用户名,偶数行设置用户的口令。例如,使用vi 编辑器建立名为logins.txt 的用户口令库文件,在文件中设置用户mike 的口令为pwabcd, 用户john 的口令是pw1234:
#vi logins.txt
mike (奇数行设置虚拟用户名)
pwabcd (偶数行设置用户口令)
john
pw1234
:wq(保存退出)
(2)生成vsftpd的认证文件
使用db_load命令生成认证文件。“-f ”命令选项设置的值是虚拟用户的口令库文件,即上面创建的logins.txt 。命令的参数设置为需要生成的认证文件名如vsftpd_login.db ,该文件放置在目录/etc/vsftpd/ 下:
#db_load -T -t hash –f logins.txt /etc/vsftpd_login.db
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
注意:
当FTP和telnet都安装完成后,重启LINUX后,再FTP会出现如下错误:
500 OOPS: vsftpd: refusing to run with writable anonymous root
在开机是发现vsftpd服务是启动失败的!
解决方法:
第一. 执行/usr/local/sbin/vsftpd &之后
vsftpd 的错误提示:500 OOPS: could not bind listening IPv4 socket 遇到这个问题我在通过编译源代码后安装vsftpd的时候遇到的,在这以前我已经通过rpm方式安装过了vsftp
因此其配置文件/etc/xinet.d/vsftpd还在并且是自启动的,也就是说是XINET模式;但是/etc/rc.local中又写入
了启动脚本,因此便发生了冲突,只需要关闭它们中的一个问题就解决了。
有以下两种方式:1.使用XINET模式
去掉/etc/rc.local文件中的vsftpd的启动脚本/usr/local/sbin/vsftp &
运行service vsftpd restart命令启动vsftpd
2.使用STANDALONE独立模式
在服务器的负担比较重的情况下最好用这个模式
chkconfig vsftpd --level 3 off
或者直接修改/etc/xinetd.d/vsftpd文件,把disable=no改成disable=yes就行了!(我用的这种方法)
第二.
我曾经也碰到过这样的问题,
VSFTPD我是自己编译的,在论坛上许多文章说是编译使用的是XINETD模式,所以只要在/etc/xinetd.d/vsftpd文件中,把disable=no改成YES就行了!
还有就是在/etc/vsftpd.conf文件添加listen=yes这样就改成了STANDALONE独立模式!
重启!OK
- redhat Linux5 安装vsftp
- redhat Linux5 安装vsftp
- redhat Linux5 安装vsftp .
- redhat Linux5 安装vsftp
- RedHat Enterprise Linux5 上安装vsftp
- RedHat Enterprise Linux5 上安装vsftp
- redhat linux5 vsftp安装与配置
- RedHat Linux5安装Oracle11G
- redhat Linux5 安装telnet
- RedHat Enterprise Linux5 安装序列号
- redhat linux5下安装qq
- RedHat Enterprise Linux5 安装wireshark
- RedHat 5 vsftp 安装
- RedHat 5 vsftp 安装
- RedHat 安装 vsftp
- redhat 安装 vsftp
- 在RedHat Enterprise Linux5上安装MySQL
- redhat企业版linux5.0安装过程
- 客户端接收组件的错误信息
- ossec开源入侵检测系统安装配置
- jq上传的值出现部分乱码
- Android 下载SDK 和 升级SDK方法 查看android源码
- 编写支持错误处理的组件程序
- redhat Linux5 安装vsftp .
- 深入浅出学习Struts1框架(十)-ActionMapping的生成和查找
- Hbase+GlusterFS可行性
- ASM disk group mount fails with ORA-15036: disk is truncated [ID 1077175.1]
- 海量图片存储策略
- 概要设计与详细设计的区别
- java List 排序 Collections.sort() 对 List 排序
- 深入浅出硬盘分区表
- DTMF信号收、发芯片在微机通信中的应用(DTMF信号发生器芯片MT5087和接收器芯片MT8870)