linux_vimrc_5.16
来源：互联网 发布：linux管理员招聘 编辑：程序博客网 时间：2024/05/17 09:36
""""""""""界面""""""""""(linux)
"在非界面的模式下光标在普通模式和插入模式的时候分别显示为方块和竖条
if has("autocmd")
au InsertLeave * silent execute "!gconftool-2 --type string --set /apps/gnome-terminal/profiles/Default/cursor_shape block"
au InsertEnter * silent execute "!gconftool-2 --type string --set /apps/gnome-terminal/profiles/Default/cursor_shape ibeam"
au VimLeave * silent execute "!gconftool-2 --type string --set /apps/gnome-terminal/profiles/Default/cursor_shape ibeam"
endif
"设置光标
"let &t_SI = "\<Esc>]50;CursorShape=1\x7"
"let &t_EI = "\<Esc>]50;CursorShape=0\x7"
"set guicursor=i:ver100-iCursor
set gcr=i-ci:ver30
set gcr=n:block-blinkon0
"set gcr=a:block-blinkon0
"设置字体
set guifont=Bitstream_Vera_Sans_Mono:h30:cANSI
set guifont=文泉驿等宽微米黑\ 11
"set guifont=Courier\24
"set guifont=Bitstream_Vera_Sans_Mono:h14:cANSI
"设置配色
colorscheme buttercream
"基本设置
set tabstop=4
set backspace=2
set nu! "显示行号
set nowrap
set linebreak "整词换行
set whichwrap=b,s,<,>,[,] "左右光标移动到头时可以自动下移
"set autochdir "自动设置目录为正在编辑的文件所在目录
set hidden "没有保存的缓冲区可以自动隐藏
set scrolloff=7 "设置光标上下保留的最小的行数
set smartindent "智能对齐方式
set shiftwidth=4 "换行时行间交错使用4个空格
set autoindent "自动对齐
set ai! "设置自动缩进
set showcmd " display incomplete commands
set wildmenu "增强模式的命令行
"=========状态栏相关===========
set laststatus=2 "总是显示状态栏status line
set ruler "在编辑过程中，右下角显示光表位置的状态行
set statusline=[%F]%y%r%m%*%=[Do_it_simple_Line:%l/%L,Column:%c][%p%%]
"==========编辑相关============
" allow backspacing over everything in insert mode
set backspace=indent,eol,start
" Don't use Ex mode, use Q for formatting
"map Q gq
" In many terminal emulators the mouse works just fine, thus enable it.
if has('mouse')
set mouse=v
endif
set autowrite "在切换buffer时自动保存当前的文件
set autoread
"===========查找替换相关============
set hlsearch
set incsearch "" 查询时非常方便，如要查找book单词，当输入到/b时，会自动找到
" 第一个b开头的单词，当输入到/bo时，会自动找到第一个bo开头的
" 单词，依次类推，进行查找时，使用此设置会快速找到答案，当你
" 找要匹配的单词时，别忘记回车
set gdefault "替换所有的行内匹配都被替换，而不是第一个
"=========编程相关===========
"set completeopt=longest,menu "关掉只能补全的时的预览窗口
filetype plugin indent on
syntax on
syntax enable
"========================================"
if has("vms")
set nobackup " do not keep a backup file, use versions instead
else
set backup " keep a backup file
endif
" Put these in an autocmd group, so that we can delete them easily.
"===================autocmd====================="
augroup vimrcEx
au!
"如果文件类型为text，则设置文本显示的宽度为78,更多参考:h setlocal
autocmd FileType text setlocal textwidth=78
" When editing a file, always jump to the last known cursor position.
" Don't do it when the position is invalid or when inside an event handler
" (happens when dropping a file on gvim).
" Also don't do it when the mark is in the first line, that is the default
" position when opening a file.
" 如下的autocmd实现打开文件自动跳到上次编辑的位置
autocmd BufReadPost *
\ if line("'\"") > 1 && line("'\"") <= line("$") |
\ exe "normal! g`\"" |
\ endif
autocmd! bufwritepost vimrc source ~/.vimrc
augroup END
" Convenient command to see the difference between the current buffer and the
" file it was loaded from, thus the changes you made.
" Only define it when not defined already.
if !exists(":DiffOrig")
command DiffOrig vert new | set bt=nofile | r # | 0d_ | diffthis
\ | wincmd p | diffthis
endif
"==========自定义的键映射=================="
nnoremap<c-s> :w<cr><ESC>:!ctags -R *
inoremap<c-s> <Esc>:w<cr>a<ESC>:!ctags -R *<ESC>i
"实现了CTRL-C、CTRL-V复制粘贴操作的映射
vnoremap <c-c> "+y
inoremap <c-v> <esc>"+p<CR>i
map <F2> <c-e> "使用F2上翻页
map <F3> <c-y> "使用F3下翻页
map <silent> <F12> :nohlsearch<CR>
map <F6> <ESC>:cd %:p:h<CR>
"leader 代表‘/’
let mapleader = ","
let g:mapleader = ","
map <F8> <ESC>:IHV<cr>
"使用CTRL+[hjkl]在窗口间导航
"map <C-c> <C-W>c
map <C-j> <C-W>j
map <C-k> <C-W>k
map <C-h> <C-W>h
map <C-l> <C-W>l
"使用箭头导航buffer
map <right> :bn<cr>
map <left> :bp<cr>
" Tab configuration
map <leader>tn :tabnew<cr>
map <leader>te :tabedit
map <leader>tc :tabclose<cr>
map <leader>tm :tabmove
"括号匹配
vnoremap $1 <esc>`>a)<esc>`<i(<esc>
vnoremap $2 <esc>`>a]<esc>`<i[<esc>
vnoremap $3 <esc>`>a}<esc>`<i{<esc>
vnoremap $$ <esc>`>a"<esc>`<i"<esc>
vnoremap $q <esc>`>a'<esc>`<i'<esc>
vnoremap $e <esc>`>a"<esc>`<i"<esc>
"非常好用的括号匹配，实际是自动生成括号
"实现便利和兼容的折中
inoremap $1 ()<esc>i
inoremap $2 []<esc>i
inoremap $3 {}<esc>i
inoremap $4 {<esc>o}<esc>O
inoremap $q ''<esc>i
inoremap $e ""<esc>i
inoremap $t <><esc>i
"使用ALT+[jk]来移动行内容
nmap <M-j> mz:m+<cr>`z
nmap <M-k> mz:m-2<cr>`z
vmap <M-j> :m'>+<cr>`<my`>mzgv`yo`z
vmap <M-k> :m'<-2<cr>`>my`<mzgv`yo`z
"========================================
" CTRL-U in insert mode deletes a lot. Use CTRL-G u to first break undo,
" so that you can undo CTRL-U after inserting a line break.
inoremap <C-U> <C-G>u<C-U>
nmap T <ESC>b"+dw"0p
"imap <c-t> <ESC>b"7dwp
if filereadable("workplace.vim")
source workplace.vim
endif
" cscope setting
"自动判断是否存在cscope并配置
if has("cscope")
set csprg=/usr/bin/cscope
set csto=0
set cst
set nocsverb
" add any database in current directory
if filereadable("cscope.out")
cs add cscope.out
" else add database pointed to by environment
elseif $CSCOPE_DB != ""
cs add $CSCOPE_DB
endif
set csverb
endif
nmap <C-@>s :cs find s <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>g :cs find g <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>c :cs find c <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>t :cs find t <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>e :cs find e <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>f :cs find f <C-R>=expand("<cfile>")<CR><CR>
nmap <C-@>i :cs find i ^<C-R>=expand("<cfile>")<CR>$<CR>
nmap <C-@>d :cs find d <C-R>=expand("<cword>")<CR><CR>
" Using 'CTRL-spacebar' then a search type makes the vim window
" split horizontally, with search result displayed in
" the new window.
"nmap <C-M>s :scs find s <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M>g :scs find g <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M>c :scs find c <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M>t :scs find t <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M>e :scs find e <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M>f :scs find f <C-R>=expand("<cfile>")<CR><CR>
"nmap <C-M>i :scs find i ^<C-R>=expand("<cfile>")<CR>$<CR>
"nmap <C-M>d :scs find d <C-R>=expand("<cword>")<CR><CR>
"
"" Hitting CTRL-space *twice* before the search type does a vertical
"" split instead of a horizontal one
"
"nmap <C-M><C-M>s
" \:vert scs find s <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M><C-M>g
" \:vert scs find g <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M><C-M>c
" \:vert scs find c <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M><C-M>t
" \:vert scs find t <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M><C-M>e
" \:vert scs find e <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M><C-M>i
" \:vert scs find i ^<C-R>=expand("<cfile>")<CR>$<CR>
"nmap <C-M><C-M>d
" \:vert scs find d <C-R>=expand("<cword>")<CR><CR>
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" end cscope setting
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
""""""""""""""""""""
"====== Minibuffer plugin和部分插件有冲突======="
"let g:miniBufExplModSelTarget = 1
"let g:miniBufExplorerMoreThanOne = 2
"let g:miniBufExplModSelTarget = 0
"let g:miniBufExplUseSingleClick = 1
"let g:miniBufExplMapWindowNavVim = 1
"let g:miniBufExplVSplit = 25
"let g:miniBufExplSplitBelow=1
let g:bufExplorerSortBy = "name"
autocmd BufRead,BufNew :call UMiniBufExplorer
"使用<leader>u 打开Minibuffer
map <leader>u :TMiniBufExplorer<cr>
"========================================"
"Auto Completion Popmenu
let g:acp_behaviorSnipmateLength=1
"tags位置设置
"使用鼠标来操作窗口的大小
nmap <F10> :set mouse=a<cr>
"ctags配置
let Tlist_Ctags_Cmd='/usr/bin/ctags'
let Tlist_Use_Right_Window=1
let Tlist_WinHeight=20
set tags=./tags,/usr/include/tags,../tags,/usr/include/sys/tags,
"Taglist ":Tlist"
let Tlist_Show_One_File=1
let Tlist_Exit_OnlyWindow=1
let g:NERDTree_title='NERD Tree'
let g:winManagerWindowLayout='NERDTree|TagList|BufExplorer'
function! NERDTree_Start()
exec 'NERDTree'
endfunction
function! NERDTree_IsValid()
return 1
endfunction
nmap <F4> :WMToggle<cr>
"折叠配置
set foldenable
set foldmethod=syntax
"set foldcolumn=0
"setlocal foldlevel=1
" set foldclose=all
nnoremap <space> @=((foldclosed(line('.')) < 0) ? 'zc' : 'zo')<CR>
"在非界面的模式下光标在普通模式和插入模式的时候分别显示为方块和竖条
if has("autocmd")
au InsertLeave * silent execute "!gconftool-2 --type string --set /apps/gnome-terminal/profiles/Default/cursor_shape block"
au InsertEnter * silent execute "!gconftool-2 --type string --set /apps/gnome-terminal/profiles/Default/cursor_shape ibeam"
au VimLeave * silent execute "!gconftool-2 --type string --set /apps/gnome-terminal/profiles/Default/cursor_shape ibeam"
endif
"设置光标
"let &t_SI = "\<Esc>]50;CursorShape=1\x7"
"let &t_EI = "\<Esc>]50;CursorShape=0\x7"
"set guicursor=i:ver100-iCursor
set gcr=i-ci:ver30
set gcr=n:block-blinkon0
"set gcr=a:block-blinkon0
"设置字体
set guifont=Bitstream_Vera_Sans_Mono:h30:cANSI
set guifont=文泉驿等宽微米黑\ 11
"set guifont=Courier\24
"set guifont=Bitstream_Vera_Sans_Mono:h14:cANSI
"设置配色
colorscheme buttercream
"基本设置
set tabstop=4
set backspace=2
set nu! "显示行号
set nowrap
set linebreak "整词换行
set whichwrap=b,s,<,>,[,] "左右光标移动到头时可以自动下移
"set autochdir "自动设置目录为正在编辑的文件所在目录
set hidden "没有保存的缓冲区可以自动隐藏
set scrolloff=7 "设置光标上下保留的最小的行数
set smartindent "智能对齐方式
set shiftwidth=4 "换行时行间交错使用4个空格
set autoindent "自动对齐
set ai! "设置自动缩进
set showcmd " display incomplete commands
set wildmenu "增强模式的命令行
"=========状态栏相关===========
set laststatus=2 "总是显示状态栏status line
set ruler "在编辑过程中，右下角显示光表位置的状态行
set statusline=[%F]%y%r%m%*%=[Do_it_simple_Line:%l/%L,Column:%c][%p%%]
"==========编辑相关============
" allow backspacing over everything in insert mode
set backspace=indent,eol,start
" Don't use Ex mode, use Q for formatting
"map Q gq
" In many terminal emulators the mouse works just fine, thus enable it.
if has('mouse')
set mouse=v
endif
set autowrite "在切换buffer时自动保存当前的文件
set autoread
"===========查找替换相关============
set hlsearch
set incsearch "" 查询时非常方便，如要查找book单词，当输入到/b时，会自动找到
" 第一个b开头的单词，当输入到/bo时，会自动找到第一个bo开头的
" 单词，依次类推，进行查找时，使用此设置会快速找到答案，当你
" 找要匹配的单词时，别忘记回车
set gdefault "替换所有的行内匹配都被替换，而不是第一个
"=========编程相关===========
"set completeopt=longest,menu "关掉只能补全的时的预览窗口
filetype plugin indent on
syntax on
syntax enable
"========================================"
if has("vms")
set nobackup " do not keep a backup file, use versions instead
else
set backup " keep a backup file
endif
" Put these in an autocmd group, so that we can delete them easily.
"===================autocmd====================="
augroup vimrcEx
au!
"如果文件类型为text，则设置文本显示的宽度为78,更多参考:h setlocal
autocmd FileType text setlocal textwidth=78
" When editing a file, always jump to the last known cursor position.
" Don't do it when the position is invalid or when inside an event handler
" (happens when dropping a file on gvim).
" Also don't do it when the mark is in the first line, that is the default
" position when opening a file.
" 如下的autocmd实现打开文件自动跳到上次编辑的位置
autocmd BufReadPost *
\ if line("'\"") > 1 && line("'\"") <= line("$") |
\ exe "normal! g`\"" |
\ endif
autocmd! bufwritepost vimrc source ~/.vimrc
augroup END
" Convenient command to see the difference between the current buffer and the
" file it was loaded from, thus the changes you made.
" Only define it when not defined already.
if !exists(":DiffOrig")
command DiffOrig vert new | set bt=nofile | r # | 0d_ | diffthis
\ | wincmd p | diffthis
endif
"==========自定义的键映射=================="
nnoremap<c-s> :w<cr><ESC>:!ctags -R *
inoremap<c-s> <Esc>:w<cr>a<ESC>:!ctags -R *<ESC>i
"实现了CTRL-C、CTRL-V复制粘贴操作的映射
vnoremap <c-c> "+y
inoremap <c-v> <esc>"+p<CR>i
map <F2> <c-e> "使用F2上翻页
map <F3> <c-y> "使用F3下翻页
map <silent> <F12> :nohlsearch<CR>
map <F6> <ESC>:cd %:p:h<CR>
"leader 代表‘/’
let mapleader = ","
let g:mapleader = ","
map <F8> <ESC>:IHV<cr>
"使用CTRL+[hjkl]在窗口间导航
"map <C-c> <C-W>c
map <C-j> <C-W>j
map <C-k> <C-W>k
map <C-h> <C-W>h
map <C-l> <C-W>l
"使用箭头导航buffer
map <right> :bn<cr>
map <left> :bp<cr>
" Tab configuration
map <leader>tn :tabnew<cr>
map <leader>te :tabedit
map <leader>tc :tabclose<cr>
map <leader>tm :tabmove
"括号匹配
vnoremap $1 <esc>`>a)<esc>`<i(<esc>
vnoremap $2 <esc>`>a]<esc>`<i[<esc>
vnoremap $3 <esc>`>a}<esc>`<i{<esc>
vnoremap $$ <esc>`>a"<esc>`<i"<esc>
vnoremap $q <esc>`>a'<esc>`<i'<esc>
vnoremap $e <esc>`>a"<esc>`<i"<esc>
"非常好用的括号匹配，实际是自动生成括号
"实现便利和兼容的折中
inoremap $1 ()<esc>i
inoremap $2 []<esc>i
inoremap $3 {}<esc>i
inoremap $4 {<esc>o}<esc>O
inoremap $q ''<esc>i
inoremap $e ""<esc>i
inoremap $t <><esc>i
"使用ALT+[jk]来移动行内容
nmap <M-j> mz:m+<cr>`z
nmap <M-k> mz:m-2<cr>`z
vmap <M-j> :m'>+<cr>`<my`>mzgv`yo`z
vmap <M-k> :m'<-2<cr>`>my`<mzgv`yo`z
"========================================
" CTRL-U in insert mode deletes a lot. Use CTRL-G u to first break undo,
" so that you can undo CTRL-U after inserting a line break.
inoremap <C-U> <C-G>u<C-U>
nmap T <ESC>b"+dw"0p
"imap <c-t> <ESC>b"7dwp
if filereadable("workplace.vim")
source workplace.vim
endif
" cscope setting
"自动判断是否存在cscope并配置
if has("cscope")
set csprg=/usr/bin/cscope
set csto=0
set cst
set nocsverb
" add any database in current directory
if filereadable("cscope.out")
cs add cscope.out
" else add database pointed to by environment
elseif $CSCOPE_DB != ""
cs add $CSCOPE_DB
endif
set csverb
endif
nmap <C-@>s :cs find s <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>g :cs find g <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>c :cs find c <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>t :cs find t <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>e :cs find e <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>f :cs find f <C-R>=expand("<cfile>")<CR><CR>
nmap <C-@>i :cs find i ^<C-R>=expand("<cfile>")<CR>$<CR>
nmap <C-@>d :cs find d <C-R>=expand("<cword>")<CR><CR>
" Using 'CTRL-spacebar' then a search type makes the vim window
" split horizontally, with search result displayed in
" the new window.
"nmap <C-M>s :scs find s <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M>g :scs find g <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M>c :scs find c <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M>t :scs find t <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M>e :scs find e <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M>f :scs find f <C-R>=expand("<cfile>")<CR><CR>
"nmap <C-M>i :scs find i ^<C-R>=expand("<cfile>")<CR>$<CR>
"nmap <C-M>d :scs find d <C-R>=expand("<cword>")<CR><CR>
"
"" Hitting CTRL-space *twice* before the search type does a vertical
"" split instead of a horizontal one
"
"nmap <C-M><C-M>s
" \:vert scs find s <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M><C-M>g
" \:vert scs find g <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M><C-M>c
" \:vert scs find c <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M><C-M>t
" \:vert scs find t <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M><C-M>e
" \:vert scs find e <C-R>=expand("<cword>")<CR><CR>
"nmap <C-M><C-M>i
" \:vert scs find i ^<C-R>=expand("<cfile>")<CR>$<CR>
"nmap <C-M><C-M>d
" \:vert scs find d <C-R>=expand("<cword>")<CR><CR>
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" end cscope setting
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
""""""""""""""""""""
"====== Minibuffer plugin和部分插件有冲突======="
"let g:miniBufExplModSelTarget = 1
"let g:miniBufExplorerMoreThanOne = 2
"let g:miniBufExplModSelTarget = 0
"let g:miniBufExplUseSingleClick = 1
"let g:miniBufExplMapWindowNavVim = 1
"let g:miniBufExplVSplit = 25
"let g:miniBufExplSplitBelow=1
let g:bufExplorerSortBy = "name"
autocmd BufRead,BufNew :call UMiniBufExplorer
"使用<leader>u 打开Minibuffer
map <leader>u :TMiniBufExplorer<cr>
"========================================"
"Auto Completion Popmenu
let g:acp_behaviorSnipmateLength=1
"tags位置设置
"使用鼠标来操作窗口的大小
nmap <F10> :set mouse=a<cr>
"ctags配置
let Tlist_Ctags_Cmd='/usr/bin/ctags'
let Tlist_Use_Right_Window=1
let Tlist_WinHeight=20
set tags=./tags,/usr/include/tags,../tags,/usr/include/sys/tags,
"Taglist ":Tlist"
let Tlist_Show_One_File=1
let Tlist_Exit_OnlyWindow=1
let g:NERDTree_title='NERD Tree'
let g:winManagerWindowLayout='NERDTree|TagList|BufExplorer'
function! NERDTree_Start()
exec 'NERDTree'
endfunction
function! NERDTree_IsValid()
return 1
endfunction
nmap <F4> :WMToggle<cr>
"折叠配置
set foldenable
set foldmethod=syntax
"set foldcolumn=0
"setlocal foldlevel=1
" set foldclose=all
nnoremap <space> @=((foldclosed(line('.')) < 0) ? 'zc' : 'zo')<CR>
