C0 and C1 control codes（传输协议中常见的控制位）

转自：http://en.wikipedia.org/wiki/C0_and_C1_control_codes

C0 (ASCII and derivatives)

These are the standard ASCII control codes. If using the ISO/IEC 2022 extension mechanism, they are designated as the active C0 control character set with the octet sequence 0x1B 0x21 0x40 (ESC ! @).

SeqDecHexAcroSymbNameCDescription^@0000NUL␀Null\0Originally used to allow gaps to be left on paper tape for edits. Later used for padding after a code that might take a terminal some time to process (e.g. a carriage return or line feed on a printing terminal). Now often used as a string terminator, especially in the C programming language.^A0101SOH␁Start of Heading First character of a message header.^B0202STX␂Start of text First character of message text, and may be used to terminate the message heading.^C0303ETX␃End of Text Often used as a "break" character (Ctrl-C) to interrupt or terminate a program or process.^D0404EOT␄End of Transmission Used on Unix to signal end-of-file condition on, or to logout from a terminal.^E0505ENQ␅Enquiry Signal intended to trigger a response at the receiving end, to see if it is still present.^F0606ACK␆Acknowledge Response to an ENQ, or an indication of successful receipt of a message.^G0707BEL␇Bell\aOriginally used to sound a bell on the terminal. Later used for a beep on systems that didn't have a physical bell. May also quickly turn on and off inverse video (a visual bell).^H0808BS␈Backspace\bMove the cursor one position leftwards. On input, this may delete the character to the left of the cursor. On output, where in early computer technology a character once printed could not be erased, the backspace was sometimes used to generate accented characters in ASCII. For example, àcould be produced using the three character sequence a BS ` (0x61 0x08 0x60). This usage is now deprecated and generally not supported. To provide disambiguation between the two potential uses of backspace, the cancel character control code was made part of the standard C1 control set.^I0909HT␉Character Tabulation,Horizontal Tabulation\tPosition to the next character tab stop.^J100ALF␊Line Feed\nOn typewriters, printers, and some terminal emulators, moves the cursor down one row without affecting its column position. On Unix, used to mark end-of-line. In MS-DOS, Windows, and various network standards, LF is used following CR as part of the end-of-line mark.^K110BVT␋Line Tabulation,Vertical Tabulation\vPosition the form at the next line tab stop.^L120CFF␌Form Feed\fOn printers, load the next page. Treated as whitespace in many programming languages, and may be used to separate logical divisions in code. In some terminal emulators, it clears the screen.^M130DCR␍Carriage Return\rOriginally used to move the cursor to column zero while staying on the same line. On Mac OS(pre-Mac OS X), as well as in earlier systems such as the Apple II and Commodore 64, used to markend-of-line. In MS-DOS, Windows, and various network standards, it is used preceding LF as part of the end-of-line mark. The Enter or Return key on a keyboard will send this character, but it may be converted to a different end-of-line sequence by a terminal program.^N140ESO␎Shift Out Switch to an alternate character set.^O150FSI␏Shift In Return to regular character set after Shift Out.^P1610DLE␐Data Link Escape Cause the following octets to be interpreted as raw data, not as control codes or graphic characters. Returning to normal usage would be implementation dependent.^Q1711DC1␑Device Control One (XON) These four control codes are reserved for device control, with the interpretation dependent upon the device they were connected. DC1 and DC2 were intended primarily to indicate activating a device while DC3 and DC4 were intended primarily to indicate pausing or turning off a device. In actual practice DC1 and DC3 (known also as XON and XOFF respectively in this usage) quickly became the de facto standard for software flow control.^R1812DC2␒Device Control Two ^S1913DC3␓Device Control Three (XOFF) ^T2014DC4␔Device Control Four ^U2115NAK␕Negative Acknowledge Sent by a station as a negative response to the station with which the connection has been set up. In binary synchronous communication protocol, the NAK is used to indicate that an error was detected in the previously received block and that the receiver is ready to accept retransmission of that block. In multipoint systems, the NAK is used as the not-ready reply to a poll.^V2216SYN␖Synchronous Idle Used in synchronous transmission systems to provide a signal from which synchronous correction may be achieved between data terminal equipment, particularly when no other character is being transmitted.^W2317ETB␗End of Transmission Block Indicates the end of a transmission block of data when data are divided into such blocks for transmission purposes.^X2418CAN␘Cancel Indicates that the data preceding it are in error or are to be disregarded.^Y2519EM␙End of medium Intended as means of indicating on paper or magnetic tapes that the end of the usable portion of the tape had been reached.^Z261ASUB␚Substitute Originally intended for use as a transmission control character to indicate that garbled or invalid characters had been received. It has often been put to use for other purposes when the in-band signaling of errors it provides is unneeded, especially where robust methods of error detection and correction are used, or where errors are expected to be rare enough to make using the character for other purposes advisable.^[271BESC␛Escape The Esc key on the keyboard will cause this character to be sent on most systems. It can be used in software user interfaces to exit from a screen, menu, or mode, or in device-control protocols (e.g., printers and terminals) to signal that what follows is a special command sequence rather than normal text. In systems based on ISO/IEC 2022, even if another set of C0 control codes are used, this octet is required to always represent the escape character.^\281CFS␜File Separator Can be used as delimiters to mark fields of data structures. If used for hierarchical levels, US is the lowest level (dividing plain-text data items), while RS, GS, and FS are of increasing level to divide groups made up of items of the level beneath it.^]291DGS␝Group separator ^^301ERS␞Record Separator ^_311FUS␟Unit separator While not technically part of the C0 control character range, the following two characters are defined in ISO/IEC 2022 as always being available regardless of which sets of control characters and graphics characters have been registered. They can be thought of as having some characteristics of control characters. 3220SP␠Space Space is a graphic character. It has a visual representation consisting of the absence of a graphic symbol. It causes the active position to be advanced by one character position. In some applications, Space can be considered a lowest-level "word separator" to be used with the adjacent separator characters.^?1277FDEL␡Delete Not technically part of the C0 control character range, this was originally used to mark deleted characters on paper tape, since any character could be changed to all ones by punching holes everywhere. On VT100 compatible terminals, this is the character generated by the key labelled ⌫, usually called backspace on modern machines, and does not correspond to the PC delete key.

C1 set

These are the most common extended control codes. If using the ISO/IEC 2022 extension mechanism, they are designated as the active C1 control character set with the sequence 0x1B 0x22 0x43 (ESC " C). Individual control functions can be accessed with the 7-bit equivalents0x1B 0x40 through 0x1B 0x5F (ESC @ through ESC _).

Esc+DecHexAcroNameDescription@12880PADPadding CharacterListed as XXX in Unicode. Not part of ISO/IEC 6429 (ECMA-48).A12981HOPHigh Octet PresetB13082BPHBreak Permitted HereFollows a graphic character where a line break is permitted. Roughly equivalent to a soft hyphen except that the means for indicating a line break is not necessarily a hyphen. Not part of the first edition of ISO/IEC 6429. ^[1]C13183NBHNo Break HereFollows the graphic character that is not to be broken. Not part of the first edition of ISO/IEC 6429.^[1]D13284INDIndexMove the active position one line down, to eliminate ambiguity about the meaning of LF. Deprecated in 1988 and withdrawn in 1992 from ISO/IEC 6429 (1986 and 1991 respectively for ECMA-48).E13385NELNext LineEquivalent to CR+LF. Used to mark end-of-line on some IBM mainframes.F13486SSAStart of Selected AreaUsed by block-oriented terminals.G13587ESAEnd of Selected AreaH13688HTSCharacter Tabulation Set
Horizontal Tabulation SetCauses a character tabulation stop to be set at the active position.I13789HTJCharacter Tabulation With Justification
Horizontal Tabulation With JustificationSimilar to Character Tabulation, except that instead of spaces or lines being placed after the preceding characters until the next tab stop is reached, the spaces or lines are placed preceding the active field so that preceding graphic character is placed just before the next tab stop.J1388AVTSLine Tabulation Set
Vertical Tabulation SetCauses a line tabulation stop to be set at the active position.K1398BPLDPartial Line Forward
Partial Line DownUsed to produce subscripts and superscripts in ISO/IEC 6429, e.g., in a printer.
Subscripts use PLD text PLU while superscripts use PLU text PLD..L1408CPLUPartial Line Backward
Partial Line UpM1418DRIReverse Line Feed
Reverse Index N1428ESS2Single-Shift 2Next character invokes a graphic character from the G2 or G3 graphic sets respectively. In systems that conform to ISO/IEC 4873 (ECMA-43), even if a C1 set other than the default is used, these two octets may only be used for this purpose.O1438FSS3Single-Shift 3P14490DCSDevice Control StringFollowed by a string of printable characters (0x20 through 0x7E) and format effectors (0x08 through 0x0D), terminated by ST (0x9C).Q14591PU1Private Use 1Reserved for a function without standardized meaning for private use as required, subject to the prior agreement of the sender and the recipient of the data.R14692PU2Private Use 2S14793STSSet Transmit State T14894CCHCancel characterDestructive backspace, intended to eliminate ambiguity about meaning of BS.U14995MWMessage Waiting V15096SPAStart of Protected AreaUsed by block-oriented terminals.W15197EPAEnd of Protected AreaX15298SOSStart of StringFollowed by a control string terminated by ST (0x9C) that may contain any character except SOS or ST. Not part of the first edition of ISO/IEC 6429. ^[1]Y15399SGCISingle Graphic Character IntroducerListed as XXX in Unicode. Not part of ISO/IEC 6429.Z1549ASCISingle Character IntroducerTo be followed by a single printable character (0x20 through 0x7E) or format effector (0x08 through 0x0D). The intent was to provide a means by which a control function or a graphic character that would be available regardless of which graphic or control sets were in use could be defined. Definitions of what the following byte would invoke was never implemented in an international standard. Not part of the first edition of ISO/IEC 6429. ^[1][1559BCSIControl Sequence IntroducerUsed to introduce control sequences that take parameters.\1569CSTString Terminator ]1579DOSCOperating System CommandFollowed by a string of printable characters (0x20 through 0x7E) and format effectors (0x08 through 0x0D), terminated by ST (0x9C). These three control codes were intended for use to allow in-band signaling of protocol information, but are rarely used for that purpose.^1589EPMPrivacy Message_1599FAPCApplication Program Command