SQL重复记录查询
来源:互联网 发布:北京网络安全员招聘网 编辑:程序博客网 时间:2024/05/01 01:49
1、查找表中多余的重复记录,重复记录是根据单个字段(peopleId)来判断
select * from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
select * from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
例二:
select * from testtable
where numeber in (select number from people group by number having count(number) > 1 )
可以查出testtable表中number相同的记录
2、删除表中多余的重复记录,重复记录是根据单个字段(peopleId)来判断,只留有rowid最小的记录
delete from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
and rowid not in (select min(rowid) from people group by peopleId having count(peopleId )>1)
3、查找表中多余的重复记录(多个字段)
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
4、删除表中多余的重复记录(多个字段),只留有rowid最小的记录
delete from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
5、查找表中多余的重复记录(多个字段),不包含rowid最小的记录
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
(二)
比方说
在A表中存在一个字段“name”,
而且不同记录之间的“name”值有可能会相同,
现在就是需要查询出在该表中的各记录之间,“name”值存在重复的项;
Select Name,Count(*) From A Group By Name Having Count(*) > 1
如果还查性别也相同大则如下:
Select Name,sex,Count(*) From A Group By Name,sex Having Count(*) > 1
(三)
方法一
declare @max integer,@id integer
declare cur_rows cursor local for select 主字段,count(*) from 表名 group by 主字段 having count(*) >; 1
open cur_rows
fetch cur_rows into @id,@max
while @@fetch_status=0
begin
select @max = @max -1
set rowcount @max
delete from 表名 where 主字段 = @id
fetch cur_rows into @id,@max
end
close cur_rows
set rowcount 0
方法二
有两个意义上的重复记录,一是完全重复的记录,也即所有字段均重复的记录,二是部分关键字段重复的记录,比如Name字段重复,而其他字段不一定重复或都重复可以忽略。
1、对于第一种重复,比较容易解决,使用
select distinct * from tableName
就可以得到无重复记录的结果集。
如果该表需要删除重复的记录(重复记录保留1条),可以按以下方法删除
select distinct * into #Tmp from tableName
drop table tableName
select * into tableName from #Tmp
drop table #Tmp
发生这种重复的原因是表设计不周产生的,增加唯一索引列即可解决。
2、这类重复问题通常要求保留重复记录中的第一条记录,操作方法如下
假设有重复的字段为Name,Address,要求得到这两个字段唯一的结果集
select identity(int,1,1) as autoID, * into #Tmp from tableName
select min(autoID) as autoID into #Tmp2 from #Tmp group by Name,autoID
select * from #Tmp where autoID in(select autoID from #tmp2)
最后一个select即得到了Name,Address不重复的结果集(但多了一个autoID字段,实际写时可以写在select子句中省去此列)
(四)
2、删除表中多余的重复记录,重复记录是根据单个字段(peopleId)来判断,只留有rowid最小的记录
delete from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
and rowid not in (select min(rowid) from people group by peopleId having count(peopleId )>1)
3、查找表中多余的重复记录(多个字段)
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
4、删除表中多余的重复记录(多个字段),只留有rowid最小的记录
delete from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
5、查找表中多余的重复记录(多个字段),不包含rowid最小的记录
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
(二)
比方说
在A表中存在一个字段“name”,
而且不同记录之间的“name”值有可能会相同,
现在就是需要查询出在该表中的各记录之间,“name”值存在重复的项;
Select Name,Count(*) From A Group By Name Having Count(*) > 1
如果还查性别也相同大则如下:
Select Name,sex,Count(*) From A Group By Name,sex Having Count(*) > 1
(三)
方法一
declare @max integer,@id integer
declare cur_rows cursor local for select 主字段,count(*) from 表名 group by 主字段 having count(*) >; 1
open cur_rows
fetch cur_rows into @id,@max
while @@fetch_status=0
begin
select @max = @max -1
set rowcount @max
delete from 表名 where 主字段 = @id
fetch cur_rows into @id,@max
end
close cur_rows
set rowcount 0
方法二
有两个意义上的重复记录,一是完全重复的记录,也即所有字段均重复的记录,二是部分关键字段重复的记录,比如Name字段重复,而其他字段不一定重复或都重复可以忽略。
1、对于第一种重复,比较容易解决,使用
select distinct * from tableName
就可以得到无重复记录的结果集。
如果该表需要删除重复的记录(重复记录保留1条),可以按以下方法删除
select distinct * into #Tmp from tableName
drop table tableName
select * into tableName from #Tmp
drop table #Tmp
发生这种重复的原因是表设计不周产生的,增加唯一索引列即可解决。
2、这类重复问题通常要求保留重复记录中的第一条记录,操作方法如下
假设有重复的字段为Name,Address,要求得到这两个字段唯一的结果集
select identity(int,1,1) as autoID, * into #Tmp from tableName
select min(autoID) as autoID into #Tmp2 from #Tmp group by Name,autoID
select * from #Tmp where autoID in(select autoID from #tmp2)
最后一个select即得到了Name,Address不重复的结果集(但多了一个autoID字段,实际写时可以写在select子句中省去此列)
(四)
查询重复
select * from tablename where id in (
select id from tablename
group by id
having count(id) > 1
)
- SQL重复记录查询
- SQL查询重复记录
- SQL查询重复记录
- SQL重复记录查询
- SQL重复记录查询
- SQL查询重复记录
- SQL重复记录查询
- SQL重复记录查询
- SQL重复记录查询
- SQL重复记录查询
- SQL重复记录查询
- SQL重复记录查询
- SQL重复记录查询
- SQL重复记录查询
- SQL重复记录查询
- SQL查询 重复记录
- SQL重复记录查询
- SQL重复记录查询
- jquery attr()方法 添加,修改,获取对象的属性值。
- 谁是贼 [网易北京市网友]: 2012-06-26 11:29:23 发表 相关LD仰天长叹,哀民生之多艰;“我们做的还远远不够。”语毕,泪如雨下,举起手中的茅台一饮而尽……
- org.hibernate.HibernateException: No Hibernate Session bound to thread, and
- 利用类别(Category)为对象添加”实例变量”
- 使用VMware捕获Linux的串口输出来调试内核的Oops
- SQL重复记录查询
- RTC 3.0.1.3安装10 Free Developers License
- 用自定义协议调用自己的程序
- “WriteHuge”: 不是“CFile”的成员
- 无线AP下使用锐捷的一些事 【无线路由器 锐捷 无线上网 不能认证 AP】
- 价格奥秘-在超市遇见亚当斯密--第三章 为什么街角的咖啡馆总有足够的面包圈?
- 设计模式--单列模式
- 字典树(Trie tree)
- MFC IE 事件挂载