SQL查询重复的语句
来源:互联网 发布:淘宝访客数影响因素 编辑:程序博客网 时间:2024/06/05 18:32
1、查找表中多余的重复记录,重复记录是根据单个字段(peopleId)来判断
select * from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
查询重复
select * from tablename where id in (
select id from tablename
group by id
having count(id) > 1
)
select * from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
例二:
select *from testtable
where numeber in (select numberfrom people group by numberhaving count(number) > 1 )
可以查出testtable表中number相同的记录
2、删除表中多余的重复记录,重复记录是根据单个字段(peopleId)来判断,只留有rowid最小的记录
delete from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
and rowid not in (select min(rowid) from people group by peopleId having count(peopleId )>1)
3、查找表中多余的重复记录(多个字段)
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
4、删除表中多余的重复记录(多个字段),只留有rowid最小的记录
delete from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
5、查找表中多余的重复记录(多个字段),不包含rowid最小的记录
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
(二)
比方说
在A表中存在一个字段“name”,
而且不同记录之间的“name”值有可能会相同,
现在就是需要查询出在该表中的各记录之间,“name”值存在重复的项;
Select Name,Count(*) From A Group By Name Having Count(*) > 1
如果还查性别也相同大则如下:
Select Name,sex,Count(*) From A Group By Name,sex Having Count(*) > 1
(三)
方法一
declare @max integer,@id integer
declare cur_rows cursor local for select 主字段,count(*) from 表名 group by 主字段 having count(*) >; 1
open cur_rows
fetch cur_rows into @id,@max
while @@fetch_status=0
begin
select @max = @max -1
set rowcount @max
delete from 表名 where 主字段 = @id
fetch cur_rows into @id,@max
end
close cur_rows
set rowcount 0
方法二
有两个意义上的重复记录,一是完全重复的记录,也即所有字段均重复的记录,二是部分关键字段重复的记录,比如Name字段重复,而其他字段不一定重复或都重复可以忽略。
1、对于第一种重复,比较容易解决,使用
select distinct * from tableName
就可以得到无重复记录的结果集。
如果该表需要删除重复的记录(重复记录保留1条),可以按以下方法删除
select distinct * into #Tmp from tableName
drop table tableName
select * into tableName from #Tmp
drop table #Tmp
发生这种重复的原因是表设计不周产生的,增加唯一索引列即可解决。
2、这类重复问题通常要求保留重复记录中的第一条记录,操作方法如下
假设有重复的字段为Name,Address,要求得到这两个字段唯一的结果集
select identity(int,1,1) as autoID, * into #Tmp from tableName
select min(autoID) as autoID into #Tmp2 from #Tmp group by Name,autoID
select * from #Tmp where autoID in(select autoID from #tmp2)
最后一个select即得到了Name,Address不重复的结果集(但多了一个autoID字段,实际写时可以写在select子句中省去此列)
(四)
2、删除表中多余的重复记录,重复记录是根据单个字段(peopleId)来判断,只留有rowid最小的记录
delete from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
and rowid not in (select min(rowid) from people group by peopleId having count(peopleId )>1)
3、查找表中多余的重复记录(多个字段)
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
4、删除表中多余的重复记录(多个字段),只留有rowid最小的记录
delete from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
5、查找表中多余的重复记录(多个字段),不包含rowid最小的记录
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
(二)
比方说
在A表中存在一个字段“name”,
而且不同记录之间的“name”值有可能会相同,
现在就是需要查询出在该表中的各记录之间,“name”值存在重复的项;
Select Name,Count(*) From A Group By Name Having Count(*) > 1
如果还查性别也相同大则如下:
Select Name,sex,Count(*) From A Group By Name,sex Having Count(*) > 1
(三)
方法一
declare @max integer,@id integer
declare cur_rows cursor local for select 主字段,count(*) from 表名 group by 主字段 having count(*) >; 1
open cur_rows
fetch cur_rows into @id,@max
while @@fetch_status=0
begin
select @max = @max -1
set rowcount @max
delete from 表名 where 主字段 = @id
fetch cur_rows into @id,@max
end
close cur_rows
set rowcount 0
方法二
有两个意义上的重复记录,一是完全重复的记录,也即所有字段均重复的记录,二是部分关键字段重复的记录,比如Name字段重复,而其他字段不一定重复或都重复可以忽略。
1、对于第一种重复,比较容易解决,使用
select distinct * from tableName
就可以得到无重复记录的结果集。
如果该表需要删除重复的记录(重复记录保留1条),可以按以下方法删除
select distinct * into #Tmp from tableName
drop table tableName
select * into tableName from #Tmp
drop table #Tmp
发生这种重复的原因是表设计不周产生的,增加唯一索引列即可解决。
2、这类重复问题通常要求保留重复记录中的第一条记录,操作方法如下
假设有重复的字段为Name,Address,要求得到这两个字段唯一的结果集
select identity(int,1,1) as autoID, * into #Tmp from tableName
select min(autoID) as autoID into #Tmp2 from #Tmp group by Name,autoID
select * from #Tmp where autoID in(select autoID from #tmp2)
最后一个select即得到了Name,Address不重复的结果集(但多了一个autoID字段,实际写时可以写在select子句中省去此列)
(四)
查询重复
select * from tablename where id in (
select id from tablename
group by id
having count(id) > 1
)
- SQL查询重复的语句
- 查询重复的SQL语句
- 查询重复记录的SQL语句
- oracle中SQL查询重复的语句
- Sql查询语句过滤重复的数据
- 查询重复记录的SQL语句
- 查询重复数据的sql语句
- sql查询单表中重复数据的语句
- sql查询重复记录语句
- sql语句查询重复信息
- Oracle 查询并删除重复记录的SQL语句
- 查询并删除重复记录的SQL语句
- 转-查询及删除重复记录的SQL语句
- 查询并删除重复记录的SQL语句
- Oracle 查询并删除重复记录的SQL语句
- SQL语句查询数据库中重复记录的个数
- Oracle 查询并删除重复记录的SQL语句
- Oracle 查询并删除重复记录的SQL语句
- SpecFlow
- IOS开发键盘弹出时遮住输入框的问题
- 黑马程序员--Socket(套接字)
- WINDOWS的常用命令
- 【转载】用VMware 8安装Ubuntu 12.04详细过程(图解)
- SQL查询重复的语句
- DOM 操作常用方法
- Android开发--身高体重指数(BIM)计算--完成BMI程序
- X Window 程式设计入门--第五章 Window
- extern "C"的用法解析--C++中extern “C”含义深层探索
- MySQL 5.5中使用semi-sync replciation
- 编译OpenCV for windows
- Custom.pll example to make DFF read only
- 8种Nosql数据库系统对比