Galaxy Nexus IMM76K 手动升级 4.1.1
来源:互联网 发布:cf开挂软件 编辑:程序博客网 时间:2024/05/18 00:05
手上 Galaxy Nexus是 IMM76K,一直等不到OTA升级。查了一下,这是三×来管理的OTA的机器,Google不管。是后娘养的。只好自己动手回到Google箮理之下。
前提升级需要在Linux 下,我的电脑装的Arch
升级过程非常简单。
英文的升级说明:
Instructions
You will find these files useful if you have used the Android Open-Source Project, flashed custom builds on your device, and wish to return that device to its factory state.
In order to use these files, you need to have the fastboot
tool in your PATH. That tool is compiled as part of every configuration of the Android Open-Source Project and is the tool used to flash custom builds on your device. On GNU/Linux systems, this also implies that you have configured USB access as mentioned in the machine setup instructions.
Your device needs to be in fastboot mode, with the bootloader unlocked. The relevant key combinations and commands are documented on the page about building for devices.
You need to uncompress each download before use, which creates a new directory for that exact download. That directory contains a ./flash-all.sh
script, which handles the various operations, installs the necessary bootloader, baseband firmware(s), and operating system. Note that this operation deletes all user data by default.
After restoring a factory image, it is recommended that you lock the bootloader, for security reasons.
1 让手机进入fastboot模式
2 解锁
3 刷固件,完成后自动重启
4让手机进入fastboot模式
5 加锁
固件网址:
https://developers.google.com/android/nexus/images
我下载的
4.1.1 (JRO03C)
Factory Images "yakju" for Galaxy Nexus "maguro" (GSM/HSPA+)
方法:在关机状态下同时按“音量+”和“音量-”和“电源”三个键,等待机器发出轻微震动即可放开
2 解锁 运行命令
$ fastboot oem unlock
...OKAY [ 13.171s]finished. total time: 13.172s
3 刷固件,完成后自动重启
下载后:yakju-jro03c-factory-3174c1e5.tgz, 需要解压缩。解压后有5个文件
-rw-r----- 1 hpc hpc 2363392 Jul 27 22:58 bootloader-maguro-primelc03.img
-rwxr-x--x 1 hpc hpc 831 Jul 27 22:58 flash-all.sh
-rwxr-x--x 1 hpc hpc 789 Jul 27 22:58 flash-base.sh
-rw-r----- 1 hpc hpc 241199343 Jul 27 22:58 image-yakju-jro03c.zip
-rw-r----- 1 hpc hpc 12583168 Jul 27 22:58 radio-maguro-i9250xxlf1.img
执行:flash-all.sh
[hpc@archhost yakju-jro03c]$ ./flash-all.sh
sending 'bootloader' (2308 KB)...OKAY [ 0.577s]writing 'bootloader'...OKAY [ 0.287s]finished. total time: 0.864srebooting into bootloader...OKAY [ 0.006s]finished. total time: 0.006ssending 'radio' (12288 KB)...OKAY [ 3.086s]writing 'radio'...OKAY [ 1.375s]finished. total time: 4.462srebooting into bootloader...OKAY [ 0.006s]finished. total time: 0.006sarchive does not contain 'boot.sig'archive does not contain 'recovery.sig'archive does not contain 'system.sig'--------------------------------------------Bootloader Version...: PRIMELC03Baseband Version.....: I9250XXLF1Serial Number........: 016B806214005016--------------------------------------------checking product...OKAY [ 0.007s]checking version-bootloader...OKAY [ 0.008s]checking version-baseband...OKAY [ 0.008s]sending 'boot' (4366 KB)...OKAY [ 1.092s]writing 'boot'...OKAY [ 0.267s]sending 'recovery' (4708 KB)...OKAY [ 1.192s]writing 'recovery'...OKAY [ 0.313s]sending 'system' (396675 KB)...OKAY [ 99.441s]writing 'system'...OKAY [ 35.623s]erasing 'userdata'...OKAY [ 0.290s]erasing 'cache'...OKAY [ 0.013s]rebooting...finished. total time: 138.346s
日志如上所示:总共用时138.346秒
未解锁,有出错日志:
[hpc@archhost yakju-jro03c]$ ./flash-all.sh
sending 'bootloader' (2308 KB)...
OKAY [ 0.573s]
writing 'bootloader'...
FAILED (remote: Bootloader Locked - Use "fastboot oem unlock" to Unlock)
finished. total time: 0.642s
rebooting into bootloader...
OKAY [ 0.006s]
finished. total time: 0.006s
sending 'radio' (12288 KB)...
OKAY [ 3.069s]
writing 'radio'...
FAILED (remote: Bootloader Locked - Use "fastboot oem unlock" to Unlock)
finished. total time: 3.075s
rebooting into bootloader...
OKAY [ 0.006s]
finished. total time: 0.006s
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: PRIMEKK15
Baseband Version.....: I9250XXLA2
Serial Number........: 016B806214005016
--------------------------------------------
checking product...
OKAY [ 0.006s]
checking version-bootloader...
FAILED
Device version-bootloader is 'PRIMEKK15'.
Update requires 'PRIMELC03'.
finished. total time: 0.067s
[hpc@ming-archhost yakju-jro03c]$ fastboot oem unlock
...
OKAY [ 13.171s]
finished. total time: 13.172s
4让手机进入fastboot模式
方法:在关机状态下同时按“音量+”和“音量-”和“电源”三个键,等待机器发出轻微震动即可放开
5 加锁
$ fastboot oem lock
...OKAY [ 0.170s]finished. total time: 0.170s
完毕。
- Galaxy Nexus IMM76K 手动升级 4.1.1
- Galaxy Nexus 从 4.0.4/4.1(JRO03C) 升级到 4.1.1 Final (Takju & Yakju)
- Android:Galaxy Nexus升级到4.1.2,并root(设备是日版)
- Galaxy nexus 升级到 Android 4.2 并root
- Galaxy Nexus 屏保
- 转载:Nexus One专用Android 2.2手动升级档下载
- 最简单讲Galaxy Nexus i9250升级android 4.2.2 (Yakju/Takju)
- galaxy nexus升级包takju-jop40d的boot.img和recovery.img中ramdisk对比
- Galaxy Nexus从CM9系统刷机至JellyBean 4.1
- Galaxy Nexus ToolKit_V10.4.0 ROOT i9250 4.2.1
- Galaxy Nexus 修改 DNS 设置
- Galaxy Nexus 电池耗电问题
- Building Kernels for Galaxy Nexus
- 烧写编译出的Android-4.0.4以及Android-4.1.2原生镜像到galaxy nexus 、Nexus 7
- Nexus 手动更新索引
- 编译android-4.3.1_r源码并刷到自己的Galaxy Nexus I9250真机上
- 编译android-4.3.1_r源码并刷到自己的Galaxy Nexus I9250真机上
- download android kernel for galaxy nexus
- JNDI全攻略(一)
- python的沙盒环境--virtualenv
- Ubuntu 12.04 LTS 中如何更改关闭按钮的位置?
- C# string.format设置字符串宽度 对齐
- android开关机动画制作,bootanimation.zip
- Galaxy Nexus IMM76K 手动升级 4.1.1
- 别了,我的Duron800
- JNDI全攻略(二)
- uva 10603 - Fill
- 设计模式之单例
- linux系统时间和硬件时钟问题(date和hwclock)
- 1.[算法]不使用*、/、+、-、%操作符求一个数的1/3
- 为什么《30天自制操作系统》封面中的猫是两只尾巴
- 如何用一段SQL语句递归找到一个目录下的所有子目录...