Tab Control中添加Dialog的一种方法

第一步:

    建立对话框工程,在对话框加入Tab Control控件,并为这个控制创建控件变量,如:CTabCtrl m_tab_mode;

第二步:

    在资源视图中加入对话框资源做为Tab Control的子页面,修改style属性为Child,border属性为None.完成这些后为这个子页面添加相对应的类.这样就可以加入去Tab Control中去了.如这里的类名分别为:CWarnPage,CRemoteCtrlPage,CRemoteDiagPage,CAVPage.

第三步:

   在主对话框的头文件中包含子页面的头文件,并建立子页面的成员变量.

CWarnPage m_warn_page;//警告页面CRemoteCtrlPage m_remote_control_page;//远程控制页面CRemoteDiagPage m_remote_diag_page;//远程诊断页面CAVPage m_av_page;//数据流页面

建立一页面数组用来维护Tab Control的切换:

CDialog *m_pPage[4];

建立一成员变量用来保存当前Tab Control的当前选择状态:

int m_cur_mode_sel;

第四步:

   在主对话框的初始化函数为Tab Control加载子页面:

//为TAB添加pagem_tab_mode.InsertItem(0,"报警");m_tab_mode.InsertItem(1,"远程控制");m_tab_mode.InsertItem(2,"远程诊断");m_tab_mode.InsertItem(3,"数据流");//默认TAB MODE显示警告页面m_cur_mode_sel =TAB_MODE_WARN;m_tab_mode.SetCurSel(m_cur_mode_sel);//创建报警页面m_warn_page.Create(IDD_DLG_WARN,&m_tab_mode);m_pPage[0] =&m_warn_page;//创建远程控制页面m_remote_control_page.Create(IDD_DLG_REMOTE_CTRL,&m_tab_mode);m_pPage[1] =&m_remote_control_page;//创建远程诊断页面m_remote_diag_page.Create (IDD_DLG_REMOTE_DIAG,&m_tab_mode);m_pPage[2] =&m_remote_diag_page;//创建数据流页面m_av_page.Create (IDD_DLG_AV,&m_tab_mode);m_pPage[3] =&m_av_page;//设定显示在Tab范围内CRect rc;m_tab_mode.GetClientRect(rc);//获取当前tab控件和客户区域//调整rc的区域以匹配报警页面rc.top +=21;rc.bottom -=2;rc.left +=2;rc.right -=1;m_warn_page.MoveWindow(&rc);//移到报警页面到rc区域m_warn_page.ShowWindow(SW_SHOW);//显示报警页面//m_warn_page.ShowWindow(SW_HIDE);//隐藏报警页面m_remote_control_page.MoveWindow(&rc);//移到远程控制页面到rc区域//m_remote_control_page.ShowWindow(SW_SHOW);//显示远程控制页面m_remote_control_page.ShowWindow(SW_HIDE);//隐藏远程控制页面m_remote_diag_page.MoveWindow(&rc);//移到远程诊断页面到rc区域//m_remote_diag_page.ShowWindow(SW_SHOW);//显示远程诊断页面m_remote_diag_page.ShowWindow(SW_HIDE);//隐藏远程诊断页面m_av_page.MoveWindow(&rc);//移到数据流页面到rc区域//m_av_page.ShowWindow(SW_SHOW);//显示数据流页面m_av_page.ShowWindow(SW_HIDE);//隐藏数据流页面UpdateData(false);

第五步:

   添加Tab Control添加SelChange响应事件处理函数:

void Ctbox_CarSimulatorDlg::OnTcnSelchangeTbMode(NMHDR *pNMHDR, LRESULT *pResult){// TODO: Add your control notification handler code hereint cur_sel =m_tab_mode.GetCurSel();if(m_cur_mode_sel !=cur_sel){m_pPage[m_cur_mode_sel]->ShowWindow(SW_HIDE);m_pPage[cur_sel]->ShowWindow(SW_SHOW);m_cur_mode_sel =cur_sel;}*pResult = 0;}

如此即可在Tab Control中添加Dialog的页面了.

  

参考源码:

tbox_CarSimulatorDlg.h:

// tbox_CarSimulatorDlg.h : header file//#pragma once#include "afxcmn.h"#include "WarnPage.h"#include "RemoteCtrlPage.h"#include "RemoteDiagPage.h"#include "AVPage.h"#define TAB_MODE_WARN 0#define TAB_MODE_REMOTE_CONTRL 1#define TAB_MODE_REMOTE_DIAG 2#define TAB_MODE_AV3// Ctbox_CarSimulatorDlg dialogclass Ctbox_CarSimulatorDlg : public CDialogEx{// Constructionpublic:Ctbox_CarSimulatorDlg(CWnd* pParent = NULL);// standard constructor// Dialog Dataenum { IDD = IDD_TBOX_CARSIMULATOR_DIALOG };protected:virtual void DoDataExchange(CDataExchange* pDX);// DDX/DDV support// Implementationprotected:HICON m_hIcon;// Generated message map functionsvirtual BOOL OnInitDialog();afx_msg void OnSysCommand(UINT nID, LPARAM lParam);afx_msg void OnPaint();afx_msg HCURSOR OnQueryDragIcon();DECLARE_MESSAGE_MAP()public:int m_channel_sel;CTabCtrl m_tab_mode;CWarnPage m_warn_page;//警告页面CRemoteCtrlPage m_remote_control_page;//远程控制页面CRemoteDiagPage m_remote_diag_page;//远程诊断页面CAVPage m_av_page;//数据流页面int m_cur_mode_sel;CDialog *m_pPage[4];afx_msg void OnBnClickedBtReset();afx_msg void OnTcnSelchangeTbMode(NMHDR *pNMHDR, LRESULT *pResult);};

tbox_CarSimulatorDlg.cpp:

// tbox_CarSimulatorDlg.cpp : implementation file//#include "stdafx.h"#include "tbox_CarSimulator.h"#include "tbox_CarSimulatorDlg.h"#include "afxdialogex.h"#ifdef _DEBUG#define new DEBUG_NEW#endif// CAboutDlg dialog used for App Aboutclass CAboutDlg : public CDialogEx{public:CAboutDlg();// Dialog Dataenum { IDD = IDD_ABOUTBOX };protected:virtual void DoDataExchange(CDataExchange* pDX);    // DDX/DDV support// Implementationprotected:DECLARE_MESSAGE_MAP()};CAboutDlg::CAboutDlg() : CDialogEx(CAboutDlg::IDD){}void CAboutDlg::DoDataExchange(CDataExchange* pDX){CDialogEx::DoDataExchange(pDX);}BEGIN_MESSAGE_MAP(CAboutDlg, CDialogEx)END_MESSAGE_MAP()// Ctbox_CarSimulatorDlg dialogCtbox_CarSimulatorDlg::Ctbox_CarSimulatorDlg(CWnd* pParent /*=NULL*/): CDialogEx(Ctbox_CarSimulatorDlg::IDD, pParent), m_channel_sel(0), m_cur_mode_sel(0){m_hIcon = AfxGetApp()->LoadIcon(IDI_ICON_TBOX);}void Ctbox_CarSimulatorDlg::DoDataExchange(CDataExchange* pDX){CDialogEx::DoDataExchange(pDX);DDX_CBIndex(pDX, IDC_CB_CHANNEL, m_channel_sel);DDX_Control(pDX, IDC_TB_MODE, m_tab_mode);}BEGIN_MESSAGE_MAP(Ctbox_CarSimulatorDlg, CDialogEx)ON_WM_SYSCOMMAND()ON_WM_PAINT()ON_WM_QUERYDRAGICON()ON_BN_CLICKED(IDC_BT_RESET, &Ctbox_CarSimulatorDlg::OnBnClickedBtReset)ON_NOTIFY(TCN_SELCHANGE, IDC_TB_MODE, &Ctbox_CarSimulatorDlg::OnTcnSelchangeTbMode)END_MESSAGE_MAP()// Ctbox_CarSimulatorDlg message handlersBOOL Ctbox_CarSimulatorDlg::OnInitDialog(){CDialogEx::OnInitDialog();// Add "About..." menu item to system menu.// IDM_ABOUTBOX must be in the system command range.ASSERT((IDM_ABOUTBOX & 0xFFF0) == IDM_ABOUTBOX);ASSERT(IDM_ABOUTBOX < 0xF000);CMenu* pSysMenu = GetSystemMenu(FALSE);if (pSysMenu != NULL){BOOL bNameValid;CString strAboutMenu;bNameValid = strAboutMenu.LoadString(IDS_ABOUTBOX);ASSERT(bNameValid);if (!strAboutMenu.IsEmpty()){pSysMenu->AppendMenu(MF_SEPARATOR);pSysMenu->AppendMenu(MF_STRING, IDM_ABOUTBOX, strAboutMenu);}}// Set the icon for this dialog.  The framework does this automatically//  when the application's main window is not a dialogSetIcon(m_hIcon, TRUE);// Set big iconSetIcon(m_hIcon, FALSE);// Set small icon// TODO: Add extra initialization here//默认选择第1路CANm_channel_sel =0;//为TAB添加pagem_tab_mode.InsertItem(0,"报警");m_tab_mode.InsertItem(1,"远程控制");m_tab_mode.InsertItem(2,"远程诊断");m_tab_mode.InsertItem(3,"数据流");//默认TAB MODE显示警告页面m_cur_mode_sel =TAB_MODE_WARN;m_tab_mode.SetCurSel(m_cur_mode_sel);//创建报警页面m_warn_page.Create(IDD_DLG_WARN,&m_tab_mode);m_pPage[0] =&m_warn_page;//创建远程控制页面m_remote_control_page.Create(IDD_DLG_REMOTE_CTRL,&m_tab_mode);m_pPage[1] =&m_remote_control_page;//创建远程诊断页面m_remote_diag_page.Create (IDD_DLG_REMOTE_DIAG,&m_tab_mode);m_pPage[2] =&m_remote_diag_page;//创建数据流页面m_av_page.Create (IDD_DLG_AV,&m_tab_mode);m_pPage[3] =&m_av_page;//设定显示在Tab范围内CRect rc;m_tab_mode.GetClientRect(rc);//获取当前tab控件和客户区域//调整rc的区域以匹配报警页面rc.top +=21;rc.bottom -=2;rc.left +=2;rc.right -=1;m_warn_page.MoveWindow(&rc);//移到报警页面到rc区域m_warn_page.ShowWindow(SW_SHOW);//显示报警页面//m_warn_page.ShowWindow(SW_HIDE);//隐藏报警页面m_remote_control_page.MoveWindow(&rc);//移到远程控制页面到rc区域//m_remote_control_page.ShowWindow(SW_SHOW);//显示远程控制页面m_remote_control_page.ShowWindow(SW_HIDE);//隐藏远程控制页面m_remote_diag_page.MoveWindow(&rc);//移到远程诊断页面到rc区域//m_remote_diag_page.ShowWindow(SW_SHOW);//显示远程诊断页面m_remote_diag_page.ShowWindow(SW_HIDE);//隐藏远程诊断页面m_av_page.MoveWindow(&rc);//移到数据流页面到rc区域//m_av_page.ShowWindow(SW_SHOW);//显示数据流页面m_av_page.ShowWindow(SW_HIDE);//隐藏数据流页面UpdateData(false);return TRUE;  // return TRUE  unless you set the focus to a control}void Ctbox_CarSimulatorDlg::OnSysCommand(UINT nID, LPARAM lParam){if ((nID & 0xFFF0) == IDM_ABOUTBOX){CAboutDlg dlgAbout;dlgAbout.DoModal();}else{CDialogEx::OnSysCommand(nID, lParam);}}// If you add a minimize button to your dialog, you will need the code below//  to draw the icon.  For MFC applications using the document/view model,//  this is automatically done for you by the framework.void Ctbox_CarSimulatorDlg::OnPaint(){if (IsIconic()){CPaintDC dc(this); // device context for paintingSendMessage(WM_ICONERASEBKGND, reinterpret_cast<WPARAM>(dc.GetSafeHdc()), 0);// Center icon in client rectangleint cxIcon = GetSystemMetrics(SM_CXICON);int cyIcon = GetSystemMetrics(SM_CYICON);CRect rect;GetClientRect(&rect);int x = (rect.Width() - cxIcon + 1) / 2;int y = (rect.Height() - cyIcon + 1) / 2;// Draw the icondc.DrawIcon(x, y, m_hIcon);}else{CDialogEx::OnPaint();}}// The system calls this function to obtain the cursor to display while the user drags//  the minimized window.HCURSOR Ctbox_CarSimulatorDlg::OnQueryDragIcon(){return static_cast<HCURSOR>(m_hIcon);}void Ctbox_CarSimulatorDlg::OnBnClickedBtReset(){// TODO: Add your control notification handler code here}void Ctbox_CarSimulatorDlg::OnTcnSelchangeTbMode(NMHDR *pNMHDR, LRESULT *pResult){// TODO: Add your control notification handler code hereint cur_sel =m_tab_mode.GetCurSel();if(m_cur_mode_sel !=cur_sel){m_pPage[m_cur_mode_sel]->ShowWindow(SW_HIDE);m_pPage[cur_sel]->ShowWindow(SW_SHOW);m_cur_mode_sel =cur_sel;}*pResult = 0;}