Tips for Developing a VoIP App

Tips for Developing a VoIP App

A Voice over Internet Protocol (VoIP) app allows the user to make phone calls using an Internet connection instead of the device’s cellular service. Such an app needs to maintain a persistent network connection to its associated service so that it can receive incoming calls and other relevant data. Rather than keep VoIP apps awake all the time, the system allows them to be suspended and provides facilities for monitoring their sockets for them. When incoming traffic is detected, the system wakes up the VoIP app and returns control of its sockets to it.

There are several requirements for implementing a VoIP app:

1. Add the UIBackgroundModes key to your app’s Info.plist file. Set the value of this key to an array that includes the voip string.

2. Configure one of the app’s sockets for VoIP usage.

3. Before moving to the background, call the setKeepAliveTimeout:handler: method to install a handler to be executed periodically. Your app can use this handler to maintain its service connection.

4. Configure your audio session to handle transitions to and from active use.

5. To ensure a better user experience on iPhone, use the Core Telephony framework to adjust your behavior in relation to cell-based phone calls; seeCore Telephony Framework Reference.

6. To ensure good performance for your VoIP app, use the System Configuration framework to detect network changes and allow your app to sleep as much as possible.

Including the voip value in the UIBackgroundModes key lets the system know that it should allow the app to run in the background as needed to manage its network sockets. This key also permits your app to play background audio (although including the audio value for the UIBackgroundModes key is still encouraged). An app with this key is also relaunched in the background immediately after system boot to ensure that the VoIP services are always available. For more information about the UIBackgroundModes key, see Information Property List Key Reference.

Configuring Sockets for VoIP Usage

In order for your app to maintain a persistent connection while it is in the background, you must tag your app’s main communication socket specifically for VoIP usage. Tagging this socket tells the system that it should take over management of the socket when your app is suspended. The handoff itself is totally transparent to your app. And when new data arrives on the socket, the system wakes up the app and returns control of the socket so that the app can process the incoming data.

You need to tag only the socket you use for communicating with your VoIP service. This is the socket you use to receive incoming calls or other data relevant to maintaining your VoIP service connection. Upon receipt of incoming data, the handler for this socket needs to decide what to do. For an incoming call, you likely want to post a local notification to alert the user to the call. For other noncritical data, though, you might just process the data quietly and allow the system to put your app back into the suspended state.

In iOS, most sockets are managed using streams or other high-level constructs. To configure a socket for VoIP usage, the only thing you have to do beyond the normal configuration is add a special key that tags the interface as being associated with a VoIP service. Table 6-1 lists the stream interfaces and the configuration for each.

Table 6-1  Configuring stream interfaces for VoIP usage

Interface

Configuration

NSInputStreamandNSOutputStream

For Cocoa streams, use the setProperty:forKey: method to add the NSStreamNetworkServiceType property to the stream. The value of this property should be set to NSStreamNetworkServiceTypeVoIP.

NSURLRequest

When using the URL loading system, use the setNetworkServiceType: method of your NSMutableURLRequest object to set the network service type of the request. The service type should be set to NSURLNetworkServiceTypeVoIP.

CFReadStreamRefandCFWriteStreamRef

For Core Foundation streams, use the CFReadStreamSetProperty or CFWriteStreamSetProperty function to add thekCFStreamNetworkServiceType property to the stream. The value for this property should be set tokCFStreamNetworkServiceTypeVoIP.

Note: When configuring your sockets, you need to configure only your main signaling channel with the appropriate service type key. You do not need to include this key when configuring your voice channels.

Because VoIP apps need to stay running in order to receive incoming calls, the system automatically relaunches the app if it exits with a nonzero exit code. (This type of exit could happen when there is memory pressure and your app is terminated as a result.) However, terminating the app also releases all of its sockets, including the one used to maintain the VoIP service connection. Therefore, when the app is launched, it always needs to create its sockets from scratch.

For more information about configuring Cocoa stream objects, see Stream Programming Guide. For information about using URL requests, see URL Loading System Programming Guide. And for information about configuring streams using the CFNetwork interfaces, see CFNetwork Programming Guide.

Installing a Keep-Alive Handler

To prevent the loss of its connection, a VoIP app typically needs to wake up periodically and check in with its server. To facilitate this behavior, iOS lets you install a special handler using the setKeepAliveTimeout:handler: method of UIApplication. You typically install this handler in theapplicationDidEnterBackground: method of your app delegate. Once installed, the system calls your handler at least once before the timeout interval expires, waking up your app as needed to do so.

Your keep-alive handler executes in the background and should return as quickly as possible. Handlers are given a maximum of 10 seconds to perform any needed tasks and return. If a handler has not returned after 10 seconds, or has not requested extra execution time before that interval expires, the system suspends the app.

When installing your handler, specify the largest timeout value that is practical for your app’s needs. The minimum allowable interval for running your handler is 600 seconds, and attempting to install a handler with a smaller timeout value will fail. Although the system promises to call your handler block before the timeout value expires, it does not guarantee the exact call time. To improve battery life, the system typically groups the execution of your handler with other periodic system tasks, thereby processing all tasks in one quick burst. As a result, your handler code must be prepared to run earlier than the actual timeout period you specified.

Configuring Your App’s Audio Session

As with any background audio app, the audio session for a VoIP app must be configured properly to ensure the app works smoothly with other audio-based apps. Because audio playback and recording for a VoIP app are not used all the time, it is especially important that you create and configure your app’s audio session object only when it is needed. For example, you would create the audio session to notify the user of an incoming call or while the user was actually on a call. As soon as the call ends, you would then remove strong references to the audio session and give other audio apps the opportunity to play their audio.

For information about how to configure and manage an audio session for a VoIP app, see Audio Session Programming Guide.

Using the Reachability Interfaces to Improve the User Experience

Because VoIP apps rely heavily on the network, they should use the reachability interfaces of the System Configuration framework to track network availability and adjust their behavior accordingly. The reachability interfaces allow an app to be notified whenever network conditions change. For example, a VoIP app could close its network connections when the network becomes unavailable and recreate them when it becomes available again. The app could also use those kinds of changes to keep the user apprised about the state of the VoIP connection.

To use the reachability interfaces, you must register a callback function with the framework and use it to track changes. To register a callback function:

1. Create a SCNetworkReachabilityRef structure for your target remote host.

2. Assign a callback function to your structure (using the SCNetworkReachabilitySetCallback function) that processes changes in your target’s reachability status.

3. Add that target to an active run loop of your app (such as the main run loop) using the SCNetworkReachabilityScheduleWithRunLoopfunction.

Adjusting your app’s behavior based on the availability of the network can also help improve the battery life of the underlying device. Letting the system track the network changes means that your app can let itself go to sleep more often.

For more information about the reachability interfaces, see System Configuration Framework Reference.

原文地址：https://developer.apple.com/library/ios/#documentation/iPhone/Conceptual/iPhoneOSProgrammingGuide/AdvancedAppTricks/AdvancedAppTricks.html#//apple_ref/doc/uid/TP40007072-CH7-SW12