Android 4.1 Netd详细分析（一）概述与应用实例

个人邮箱：[e-mail]

一.概述

      所谓 Netd 就是Network Daemon 的缩写，表示Network守护进程，类似的命名还有很多，例如 Vold（Volumn Deamon），Rild（Radio Interface Layer Deamon）
      Netd负责跟一些涉及网络的配置，操作，管理，查询等相关的功能实现，比如，例如带宽控制（Bandwidth），流量统计，带宽控制，网络地址转换（NAT），个人局域网（pan），PPP链接，soft-ap，共享上网（Tether），配置路由表，interface配置管理，等等……
      通过netlink，虚拟文件系统，等linux内核提供的用户接口，通信内核,或者直接执行系统模块，管理网络相关部分。

涉及主要源码位置：

    Netd:
             /System/netd/*
    lib：
             /system/core/libsysutils/src
    Framework:
            /frameworks/base/services/java/com/android/server/NetworkManagementService.java
            /frameworks/base/services/java/com/android/server/NativeDaemonConnector.java

框架图~

很不规范，会意即可：

二.ndc

      理解一个模块最好方法就是实际应用。netd最为一个deamon，为开发者提供了一个用于管理的接口。就是ndc (nativedeamonconnector)，通过adb可以直接使用CommandListener中定义的各类命令。相似的framework层的NativeDeamonConnector是为上层提供的接口。下面是4.2中ndc可用的命令集合：

可用命令表：

    例如： leo@leo-weng:~$ adb shell ndc interface list

interfacelistreadrxcounter| readtxcountergetthrottle<iface><”rx|tx”>setthrottle<iface><rx_kbps|tx_kbps>driver<iface><cmd><args>route<add|remove> <iface> <”default|secondary”><dst> <prefix> <gateway>list_ttys ipfwdstatusenable|disabletetherstatusstart-reverse|stop-reversestop<start<addr_1 addr_2 addr_3 addr_4 [addr_2n]>interface<add|remove|list>dnslistdnsset <addr_1> < addr_2>nat<enable|disable><iface><extface><addrcnt><nated-ipaddr/prelength>pppdattach<tty> <addr_local> <add_remote> <dns_1><dns_2>detach<tty>softapstartap|stopapfwreload<iface> <AP|P2P>clientsstatusset<iface> <SSID> <wpa-psk|wpa2-psk|open> [<key><channel> <preamble><max SCB>]resolversetdefaultif<iface>setifdns<iface><dns_1><dns_2>flushdefaultifflushif<iface>bandwithenable|disableremovequota|rqgetquota|gqgetiquota|giq<iface>setquota|sq<bytes> <iface>removequota|rqs<iface>removeiiquota|riq<iface>setiquota|sq<interface><bytes>addnaughtyapps|ana<appUid>removenaughtyapps|rna<appUid>setgolbalalert|sga<bytes>debugsettetherglobalalert|dstga<iface0><iface1>setsharedalert|ssa<bytes>removesharedalert|rsasetinterfacealert|sia<iface><bytes>removeinterfacealert|ria<iface>gettetherstats|gts<iface0><iface1>idletimerenable|disableadd|remove<iface><timeout><classLabel>firewallenable|disable|is_enabledset_interface_rule<rmnet0><allow|deny>set_egress_source_rule<ip_addr><allow|deny>set_egress_dest_rule<ip_addr><port><allow|deny>set_uid_rule<uid><allow|deny>clatdstop|status|start<iface>

从init.rc文件中可以看到，是系统级的守护进程，手动kill后还会从新启动。

三.基本实例

就拿手机的soft-ap功能来举例吧，以使用 softap(Soft Access Point)为例。softap可以为wlan接入设备共享手机使用的移动网络，笔记本接入softap，可以通过手机的 3g 上网。以htc 中的 WLAN 热点的 app,如下图所示。

 

1)设置并开启 softap(便携式 WLAN 热点)

在 Setting 选项中进行设置,该设置功能的开启将涉及相关的UI 路径下相关的文件,packages /apps/Settings/src/com/android/settings/wifi 路径下,程序中的 WifiApEnabler. OnPreferenceChange 里, 设置 soft ap 在 wifiApDialog.onClick 里。

2)调用相应的处理函数,通过 socket 向 netd 下发命令

应用层通过ConnectivityManager接口，最终走到 Framework 层的 NetworkManagementService.startAccessPoint 函数。

//NetworkManagementService.java    @Override    public void startAccessPoint(            WifiConfiguration wifiConfig, String wlanIface, String softapIface) {        mContext.enforceCallingOrSelfPermission(CONNECTIVITY_INTERNAL, TAG);        try {            wifiFirmwareReload(wlanIface, "AP");            if (wifiConfig == null) {                mConnector.execute("softap", "set", wlanIface, softapIface);            } else {                mConnector.execute("softap", "set", wlanIface, softapIface, wifiConfig.SSID,                        getSecurityType(wifiConfig), wifiConfig.preSharedKey);            }            mConnector.execute("softap", "startap");        } catch (NativeDaemonConnectorException e) {            throw e.rethrowAsParcelableException();        }    }

NetworkManagementService 通过NativeDaemonConnector, 这里用来和系统的 netd 守护进程通过 socket 进行通信，发送命令。

3) netd 接受命令并进行处理,并将处理结果反馈给 Framework 层。

Netd 中 softap 控制的功能在/system/netd/SoftapController.{h,cpp}里, 具体的执行是通过调用网卡驱动的 ap 功能。NetworkManagementService 通过 NativeDaemonConnector 向下通过 socket 向下 softap 相关的字符串命令,NativeDaemonConnector 中维护着与 Netd 中 CommandListener 相关联的内部socket 线程。两者可以通过它相互通信。

//CommandListener.cppint CommandListener::SoftapCmd::runCommand(SocketClient *cli,                                        int argc, char **argv) {    int rc = 0, flag = 0;    char *retbuf = NULL;    if (argc < 2) {        cli->sendMsg(ResponseCode::CommandSyntaxError, "Softap Missing argument", false);        return 0;    }    if (!strcmp(argv[1], "start")) {        rc = sSoftapCtrl->startDriver(argv[2]);    } else if (!strcmp(argv[1], "stop")) {        rc = sSoftapCtrl->stopDriver(argv[2]);    } else if (!strcmp(argv[1], "startap")) {        rc = sSoftapCtrl->startSoftap();    } else if (!strcmp(argv[1], "stopap")) {        rc = sSoftapCtrl->stopSoftap();    } else if (!strcmp(argv[1], "fwreload")) {        rc = sSoftapCtrl->fwReloadSoftap(argc, argv);    } else if (!strcmp(argv[1], "clients")) {        rc = sSoftapCtrl->clientsSoftap(&retbuf);        if (!rc) {            cli->sendMsg(ResponseCode::CommandOkay, retbuf, false);            free(retbuf);            return 0;        }    } else if (!strcmp(argv[1], "status")) {…………

4) Framework 受到回馈的信息,并通知 UI 处理结果,呈现给用户。

相关的 Log 实例:

D/NetworkManagementService( 1760): ===================startAccessPoint
commandLine=softap set wlan0 wlan0 "HTC Portable Hotspot E2D4" "wpa2-psk" *** 0 0 5 0
D/NetdConnector( 1760): SND -> {softap set wlan0 wlan0 "HTC Portable Hotspot E2D4""wpa2-psk" "3FF8F7531FBB9" 0 0 5 0} {null}
D/NetdConnector( 1760): already send Command (Wait Response)
D/NetdConnector( 1760): listenToSocket read--: (31,0)
D/NetdConnector( 1760): RCV <- {200 Softap operation succeeded}
D/NetdConnector( 1760): RSP <- {200 Softap operation succeeded}
D/NetdConnector( 1760): No Resp times=0
D/NetdConnector( 1760): finish send Command (complete)
D/NetdConnector( 1760): SND -> {softap startap} {null}
D/NetdConnector( 1760): already send Command (Wait Response)
D/NetdConnector( 1760): listenToSocket read--: (31,0)
D/NetdConnector( 1760): RCV <- {600 Iface linkstate wlan0 down}
D/NetdConnector( 1760): listenToSocket read--: (24,0)
D/NetdConnector( 1760): RCV <- {600 Iface added m.wlan0}
D/NetdConnector( 1760): listenToSocket read--: (33,0)
D/NetdConnector( 1760): RCV <- {600 Iface linkstate m.wlan0 down}
D/NetdConnector( 1760): listenToSocket read--: (31,0)
D/NetdConnector( 1760): RCV <- {600 Iface linkstate m.wlan0 up}
D/NetdConnector( 1760): listenToSocket read--: (31,0)
D/NetdConnector( 1760): RCV <- {200 Softap operation succeeded}
D/NetdConnector( 1760): RSP <- {200 Softap operation succeeded}
D/NetdConnector( 1760): No Resp times=0
D/NetdConnector( 1760): finish send Command (complete)
D/NetdConnector( 1760): SND -> {softap setMaxConns 5} {null}
D/NetdConnector( 1760): already send Command (Wait Response)
D/NetdConnector( 1760): listenToSocket read--: (31,0)
D/NetdConnector( 1760): RCV <- {200 Softap operation succeeded}
D/NetdConnector( 1760): RSP <- {200 Softap operation succeeded}
D/NetdConnector( 1760): No Resp times=0
D/NetdConnector( 1760): finish send Command (complete)
D/NetdConnector( 1760): listenToSocket read--: (29,0)
D/NetdConnector( 1760): RCV <- {600 Iface linkstate wlan0 up}
D/NetdConnector( 1760): listenToSocket read--: (29,0)
D/NetdConnector( 1760): RCV <- {600 Iface linkstate wlan0 up}
D/NetdConnector( 1760): listenToSocket read--: (29,0)
D/NetdConnector( 1760): RCV <- {600 Iface linkstate wlan0 up}
D/NetdConnector( 1760): SND -> {interface getcfg wlan0} {null}
D/NetdConnector( 1760): listenToSocket read--: (65,0)
D/NetdConnector( 1760): already send Command (Wait Response)
D/NetdConnector( 1760): RCV <- {213 1c:b0:94:36:bf:cb 0.0.0.0 0 [up broadcast running multicast]}
D/NetdConnector( 1760): RSP <- {213 1c:b0:94:36:bf:cb 0.0.0.0 0 [up broadcast runningmulticast]}

D/NetworkManagementService( 1760): rsp <213 1c:b0:94:36:bf:cb 0.0.0.0 0 [up broadcast running multicast]>
D/NetworkManagementService( 1760): flags <[up broadcast running multicast]>
D/NetdConnector( 1760): SND -> {interface setcfg wlan0 192.168.1.1 24 [up]} {null}
D/NetdConnector( 1760): listenToSocket read--: (32,0)
D/NetdConnector( 1760): RCV <- {200 Interface configuration set}
D/NetdConnector( 1760): already send Command (Wait Response)
D/NetdConnector( 1760): RSP <- {200 Interface configuration set}
D/NetdConnector( 1760): No Resp times=0
D/NetdConnector( 1760): finish send Command (complete)
E/NetworkManagementService( 1760): DEBUG softap setmaclist: softap setmaclist 0 "" ""
D/NetdConnector( 1760): SND -> {softap setmaclist 0 "" ""} {null}
D/NetdConnector( 1760): already send Command (Wait Response)
D/NetdConnector( 1760): listenToSocket read--: (31,0)
D/NetdConnector( 1760): RCV <- {200 Softap operation succeeded}
D/NetdConnector( 1760): RSP <- {200 Softap operation succeeded}
D/NetdConnector( 1760): No Resp times=0
D/NetdConnector( 1760): finish send Command (complete)
D/NetdConnector( 1760): SND -> {tether interface add wlan0} {null}
D/NetdConnector( 1760): already send Command (Wait Response)
D/NetdConnector( 1760): listenToSocket read--: (31,0)
D/NetdConnector( 1760): RCV <- {200 Tether operation succeeded}
D/NetdConnector( 1760): RSP <- {200 Tether operation succeeded}
D/NetdConnector( 1760): No Resp times=0
D/NetdConnector( 1760): finish send Command (complete)
D/NetdConnector( 1760): SND -> {softap getassoclist} {null}
D/NetdConnector( 1760): already send Command (Wait Response)
D/NetdConnector( 1760): listenToSocket read--: (7,0)
D/NetdConnector( 1760): RCV <- {222 0|}
D/NetdConnector( 1760): RSP <- {222 0|}
D/NetdConnector( 1760): No Resp times=0
D/NetdConnector( 1760): finish send Command (complete)
E/NetworkManagementService( 1760): DEBUG softap getassoclist: 0|
D/NetdConnector( 1760): SND -> {ipfwd enable} {null}
D/NetdConnector( 1760): already send Command (Wait Response)
D/NetdConnector( 1760): listenToSocket read--: (30,0)
D/NetdConnector( 1760): RCV <- {200 ipfwd operation succeeded}
D/NetdConnector( 1760): RSP <- {200 ipfwd operation succeeded}
D/NetdConnector( 1760): No Resp times=0
D/NetdConnector( 1760): finish send Command (complete)
D/NetworkManagementService( 1760): stopTethering
D/NetdConnector( 1760): SND -> {tether status} {null}
D/NetdConnector( 1760): listenToSocket read--: (31,0)
……

……