待遇解决

来源：互联网发布：淘宝网京东商城编辑：程序博客网时间：2024/04/27 19:49

** Hisome Board: HD6192MT A1_PP1_V100 LE

U-Boot 1.1.4 (Mar 28 2012 - 14:57:09) Marvell version: 3.5.9

U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CD5A0

Soc: 88F6192 A1CPU running @ 800Mhz L2 running @ 400Mhz
SysClock = 200Mhz , TClock = 166Mhz

DRAM (DDR2) CAS Latency = 3 tRP = 3 tRAS = 8 tRCD=3
DRAM CS[0] base 0x00000000 size 128MB
DRAM CS[1] base 0x08000000 size 128MB
DRAM Total size 256MB 16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
*** Warning - bad CRC, using default environment

[16384kB@f8000000] Flash: 16 MB

CPU : Marvell Feroceon (Rev 1)

Streaming disabled
Write allocate disabled

Module 0 is RGMII

USB 0: host mode
PEX 0: interface detected no Link.
Net: egiga0 [PRIME], egiga1
.............
Un-Protected 13 sectors

.............
Erased 13 sectors
clrconfig ok
生产部门反馈，一块SIP6000设备，正常工作一段时间后，重启出现如上信息，不知道群里谁有这方面经验？？
[11:02:00] : *** Warning - bad CRC, using default environment
[11:02:14]: 恩啊，这个是flash出错么？？
[11:07:06] : 可能是uboot的环境变量的sector数据错误了

设置一下环境变量，然后saveenv
[11:19:08]: u-boot进不去的