Mac下配置svn服务器
来源:互联网 发布:内窥镜软件下载 编辑:程序博客网 时间:2024/06/05 18:13
Mac自带了svn服务端和客户端,所以只需要简单配置一下就可以使用。
1、创建svn repository
- svnadmin create /Users/gaohf/svn/repository
2、配置svn用户权限/Users/gaohf/svn/repository/conf/目录下存在3个文件:authz、passwd、svnserve.conf
authz,内容如下:
- ### This file is an example authorization file for svnserve.
- ### Its format is identical to that of mod_authz_svn authorization
- ### files.
- ### As shown below each section defines authorizations for the path and
- ### (optional) repository specified by the section name.
- ### The authorizations follow. An authorization line can refer to:
- ### - a single user,
- ### - a group of users defined in a special [groups] section,
- ### - an alias defined in a special [aliases] section,
- ### - all authenticated users, using the '$authenticated' token,
- ### - only anonymous users, using the '$anonymous' token,
- ### - anyone, using the '*' wildcard.
- ###
- ### A match can be inverted by prefixing the rule with '~'. Rules can
- ### grant read ('r') access, read-write ('rw') access, or no access
- ### ('').
- [aliases]
- # joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average
- [groups]
- gaohf_group = gaohf
- # harry_sally_and_joe = harry,sally,&joe
- [/]
- gaohf=rw
- # &joe = r
- * =
- # [repository:/baz/fuz]
- # @harry_and_sally = rw
- # * = r
passwd,内容如下:
- ### This file is an example password file for svnserve.
- ### Its format is similar to that of svnserve.conf. As shown in the
- ### example below it contains one section labelled [users].
- ### The name and password for each user follow, one account per line.
- [users]
- gaohf=123456
svnserve.conf,内容如下:
- ### This file controls the configuration of the svnserve daemon, if you
- ### use it to allow access to this repository. (If you only allow
- ### access through http: and/or file: URLs, then this file is
- ### irrelevant.)
- ### Visit http://subversion.tigris.org/ for more information.
- [general]
- ### These options control access to the repository for unauthenticated
- ### and authenticated users. Valid values are "write", "read",
- ### and "none". The sample settings below are the defaults.
- anon-access = read
- auth-access = write
- ### The password-db option controls the location of the password
- ### database file. Unless you specify a path starting with a /,
- ### the file's location is relative to the directory containing
- ### this configuration file.
- ### If SASL is enabled (see below), this file will NOT be used.
- ### Uncomment the line below to use the default password file.
- password-db = passwd
- ### The authz-db option controls the location of the authorization
- ### rules for path-based access control. Unless you specify a path
- ### starting with a /, the file's location is relative to the the
- ### directory containing this file. If you don't specify an
- ### authz-db, no path-based access control is done.
- ### Uncomment the line below to use the default authorization file.
- authz-db = authz
- ### This option specifies the authentication realm of the repository.
- ### If two repositories have the same authentication realm, they should
- ### have the same password database, and vice versa. The default realm
- ### is repository's uuid.
- # realm = My First Repository
- [sasl]
- ### This option specifies whether you want to use the Cyrus SASL
- ### library for authentication. Default is false.
- ### This section will be ignored if svnserve is not built with Cyrus
- ### SASL support; to check, run 'svnserve --version' and look for a line
- ### reading 'Cyrus SASL authentication is available.'
- # use-sasl = true
- ### These options specify the desired strength of the security layer
- ### that you want SASL to provide. 0 means no encryption, 1 means
- ### integrity-checking only, values larger than 1 are correlated
- ### to the effective key length for encryption (e.g. 128 means 128-bit
- ### encryption). The values below are the defaults.
- # min-encryption = 0
- # max-encryption = 256
3、启动服务器
- svnserve -d -r /Users/gaohf/svn/repository
没有任何提示就说明启动成功了。
4、将项目导入svn库
- svn import /Users/gaohf/projects/demo/ svn://localhost/svn/repository/demo --username gaohf --password 123456 -m "Initial import"
5、签出项目
- svn checkout svn://127.0.0.1/svn/repository/demo --username=gaohf --password=123456
- Mac下配置svn服务器
- mac下配置svn服务器
- Mac下配置svn服务器
- Mac下配置svn服务器
- Mac下配置svn服务器
- Mac 下配置SVN服务器
- mac下配置svn服务器文章2
- Mac下配置Apache SVN服务器
- (Mac)(Liunx)下配置svn服务器
- Mac 下 svn 服务器的配置
- MAC配置SVN服务器
- MAC配置SVN服务器
- MAC配置SVN服务器
- MAC配置SVN服务器
- MAC配置SVN服务器
- Mac下搭建svn服务器和XCode配置svn
- Mac下svn服务器搭建XCode配置svn
- Mac下搭建svn服务器和XCode配置svn
- 差分信号的好处
- Linux系统移植的概述
- php mysql 操作
- C++命名规范
- ndk-build 使用笔记
- Mac下配置svn服务器
- 关于C++中的友元函数的总结
- Ubuntu 12.04 Nginx 安装 (Apache 改 Nginx) 待修改
- Failed to create or upgrade OLR
- What to do when apt-get fails
- Flex4快速学习(一)
- Linux下配置jdk1.7
- 假Windows8密钥产生器现身
- oralce 11g安装