linux 下查看机器配置命令
来源:互联网 发布:java开源工作流框架 编辑:程序博客网 时间:2024/05/17 04:31
cat /proc/ cpuinfo
或者vim /proc/ cpuinfo
查看系统信息
cat /proc/ cpuinfo - CPU (i.e. vendor, Mhz, flags like mmx)
cat /proc/interrupts - 中断
cat /proc/ioports - 设备IO端口
cat /proc/meminfo - 内存信息(i.e. mem used, free, swap size)
cat /proc/partitions - 所有设备的所有分区
cat /proc/pci - PCI设备的信息
cat /proc/swaps - 所有Swap分区的信息
cat /proc/version - Linux的版本号 相当于 uname -r
uname -a - 看系统内核等信息
查看linux系统版本方法:
cat /etc/redhat-release
cat /etc/issue
cat /proc/version
查看磁盘空间大小:
df -m
cat /etc/issue 查看操作系统版本
cat /etc/inittab 查看启动项
cat /proc/cpuinfo 查看cpu信息
uname -a 系统版本
df -h 查硬盘
cat /etc/passwd 查看所有用户的列表
cat /etc/group 查看用户组
du -sh 查看当前文件夹大小
这里linux下使用dmidecode查看硬件信息
dmidecode is a tool for dumping a computer''''s DMI (some say SMBIOS) table contents in a human-readable format. This table contains a description of the system''''s hardware components, as well as other useful pieces of information such as serial numbers and BIOS revision. Thanks to this table, you can retrieve this information without having to probe for the actual hardware. While this is a good point in terms of report speed and safeness, this also makes the presented information possibly unreliable.
dmidecode可以全面的显示bios、cpu、内存等硬件信息。
查看主板的序列号
dmidecode | grep "Serial Number"
显示物理内存块数
dmidecode |grep -A16 "Memory Device$"
显示CPU信息
dmidecode |grep -A42 "Processor"|more
另外:
grep -An (A和n之间也可以有空格) 输出包含指定字符串的行及该行后续的n行
/usr/sbin/dmidecode | grep "Serial Number"可以读出计算机的标示号,当然这只对正规品牌的机器有效,如DELL、HP之类,取出的值和机器上贴的值是对应的,而类似清华同方之流的兼容机,基本上读不出任何有意义的数据。
- linux 下查看机器配置命令
- linux 下查看机器配置命令 .
- linux 下查看机器配置命令
- Linux 下查看机器配置命令
- linux 下查看机器配置
- Linux下查看机器配置
- Linux 查看机器配置信息
- Linux 查看机器配置信息
- Linux 查看 机器配置
- linux 机器配置查看
- Linux 查看机器配置信息
- 查看机器配置的命令:)
- Linux下怎样查看机器配置,及cpu/内存/硬盘使用率
- Linux下怎样查看机器配置,及cpu/内存/硬盘使用率
- Linux下怎样查看机器配置,及cpu/内存/硬盘使用率
- Linux下怎样查看机器配置,及cpu/内存/硬盘使用率
- linux 查看机器配置和负载
- Ubuntu 查看机器配置信息
- FFMpeg直接解码live555收到的网络数据包时错误解决方法
- RabbitMQ学习之:(十一)AMQP.0-10规范,中文翻译1,2,3章 (转载)
- tomcat启动时候一闪而过
- 在不修改代码的情况下无限扩展应用项目
- 拷贝构造函数的参数类型必须是引用
- linux 下查看机器配置命令
- bmp/gif/jpg图象最底层原理分析
- STL Vector
- linux中 probe函数的何时调用的
- 想起了高中时的一个疑问
- Zookeeper安装
- HBase源代码调试(4)
- 自定义标签基础知识
- eCos技术网成长之路9—搬家、备案并改版成功