aix 网卡相关常用命令

AIX中查看系统中的网卡设备
#lsdev -Cc adapter | grep ent
ent0 Available 00-08 10/100/1000 Base-TX PCI-X Adapter (14106902)
ent1 Available 07-08 2-Port 10/100/1000 Base-TX PCI-X Adapter (14108902)
ent2 Available 07-09 2-Port 10/100/1000 Base-TX PCI-X Adapter (14108902)
ent3 Available 0B-08 10/100/1000 Base-TX PCI-X Adapter (14106902)
ent4 Available EtherChannel / IEEE 802.3ad Link Aggregation
从上面可以看出，系统中共有四块网卡(ent0~ent3，而ent4是由多块网卡绑定出来的虚拟网卡EtherChannel，关于网卡绑定，请参考piner的另一篇文章。
那么，四块网卡具体是插在哪个插槽上的呢？
#lsslot -c pci | grep ent
U787B.001.DNW6FCB-P1-C2 PCI-X capable, 64 bit, 133MHz slot ent3
U787B.001.DNW6FCB-P1-C3 PCI-X capable, 64 bit, 266MHz slot ent0
上述命令显示的是插在PCI插槽上的两块网卡，都是在第一个PCI笼子中，分别在第二个和第三个插槽。另外两块则是主板上内置的网卡，不是插在PCI槽上的。
#lscfg -v | grep ent
Model Implementation: Multiple Processor, PCI bus
ent1 U787B.001.DNW6FCB-P1-T9 2-Port 10/100/1000 Base-TX PCI-X Adapter (14108902)
ent2 U787B.001.DNW6FCB-P1-T10 2-Port 10/100/1000 Base-TX PCI-X Adapter (14108902)
ent3 U787B.001.DNW6FCB-P1-C2-T1 10/100/1000 Base-TX PCI-X Adapter (14106902)
ent0 U787B.001.DNW6FCB-P1-C3-T1 10/100/1000 Base-TX PCI-X Adapter (14106902)
AIX中，一个网卡在系统中实际上可以看到两个设备接口，en开头的是Ethernet II标准的，et开头的是IEEE 802.3标准的。以太网的帧有两种标准：Ethernet II(或者叫Standard Ethernet)和IEEE802.3，两者主要是标志帧的上层协议的方式不一样，Ethernet II使用了一个TYPE值表示，而IEEE802.3则使用一个数据LENGTH表示。一般来说，Ethernnet II更常用。
#lsdev -Cc if
en0 Defined 00-08 Standard Ethernet Network Interface
en1 Defined 07-08 Standard Ethernet Network Interface
en2 Defined 07-09 Standard Ethernet Network Interface
en3 Defined 0B-08 Standard Ethernet Network Interface
en4 Available Standard Ethernet Network Interface
et0 Defined 00-08 IEEE 802.3 Ethernet Network Interface
et1 Defined 07-08 IEEE 802.3 Ethernet Network Interface
et2 Defined 07-09 IEEE 802.3 Ethernet Network Interface
et3 Defined 0B-08 IEEE 802.3 Ethernet Network Interface
et4 Defined IEEE 802.3 Ethernet Network Interface
lo0 Available Loopback Network Interface
其中lo0表示本地回环接口，也就是127.0.0.1
查看某块网卡的具体属性
#lsattr -El ent1
alt_addr 0x000000000000 Alternate ethernet address True
busintr 273 Bus interrupt level False
busmem 0xf8120000 Bus memory address False
chksum_offload yes Enable hardware transmit and receive checksum True
compat_mode no Gigabit Backward compatability True
copy_bytes 2048 Copy packet if this many or less bytes True
delay_open no Enable delay of open until link state is known True
failback yes Enable auto failback to primary True
failback_delay 15 Failback to primary delay timer True
failover disable Enable failover mode True
flow_ctrl yes Enable Transmit and Receive Flow Control True
intr_priority 3 Interrupt priority False
intr_rate 10000 Max rate of interrupts generated by adapter True
jumbo_frames no Transmit jumbo frames True
large_send yes Enable hardware TX TCP resegmentation True
media_speed Auto_Negotiation Media speed True
rom_mem 0xf80c0000 ROM memory address False
rx_hog 1000 Max rcv buffers processed per rcv interrupt True
rxbuf_pool_sz 2048 Rcv buffer pool, make 2X rxdesc_que_sz True
rxdesc_que_sz 1024 Rcv descriptor queue size True
slih_hog 10 Max Interrupt events processed per interrupt True
tx_que_sz 8192 Software transmit queue size True
txdesc_que_sz 512 TX descriptor queue size True
use_alt_addr no Enable alternate ethernet address True
查看某个网卡设备接口的属性
#lsattr -El en0
alias4 IPv4 Alias including Subnet Mask True
alias6 IPv6 Alias including Prefix Length True
arp on Address Resolution Protocol (ARP) True
authority Authorized Users True
broadcast Broadcast Address True
mtu 1500 Maximum IP Packet Size for This Device True
netaddr Internet Address True
netaddr6 IPv6 Internet Address True
netmask Subnet Mask True
prefixlen Prefix Length for IPv6 Internet Address True
remmtu 576 Maximum IP Packet Size for REMOTE Networks True
rfc1323 Enable/Disable TCP RFC 1323 Window Scaling True
security none Security Level True
state down Current Interface Status True
tcp_mssdflt Set TCP Maximum Segment Size True
tcp_nodelay Enable/Disable TCP_NODELAY Option True
tcp_recvspace Set Socket Buffer Space for Receiving True
tcp_sendspace Set Socket Buffer Space for Sending True
#lsattr -El et0
alias4 IPv4 Alias including Subnet Mask True
alias6 IPv6 Alias including Prefix Length True
arp on Address Resolution Protocol (ARP) True
authority Authorized Users True
broadcast Broadcast Address True
mtu 1492 Maximum IP Packet Size for This Device True
netaddr Internet Address True
netaddr6 IPv6 Internet Address True
netmask Subnet Mask True
prefixlen Prefix Length for IPv6 Internet Address True
remmtu 576 Maximum IP Packet Size for REMOTE Networks True
rfc1323 Enable/Disable TCP RFC 1323 Window Scaling True
security none Security Level True
state down Current Interface Status True
tcp_mssdflt Set TCP Maximum Segment Size True
tcp_nodelay Enable/Disable TCP_NODELAY Option True
tcp_recvspace Set Socket Buffer Space for Receiving True
tcp_sendspace Set Socket Buffer Space for Sending True
修改接口属性，比如设置IP和子网掩码
#chdev -l en1 -a netaddr='192.168.1.1' -a netmask='255.255.255.0'
而ifconfig只能查看和修改网线已经连接好的网卡信息
#ifconfig -a
en4: flags=5e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD,PSEG,CHAIN>
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
tcp_sendspace 131072 tcp_recvspace 65536
lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT>
inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
inet6 ::1/0
tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1
如果使用ifconfig操作没有连接网络的网卡则会报错
#ifconfig en1 up
0821-510 ifconfig: error calling entry point for /usr/lib/drivers/if_en: The specified device does not exist.
smit操作网卡相关命令
smit mkinet添加新的网卡接口
smit chinet配置网卡接口
smit tcpip配置tcpip网络
smit mktcpip配置IP地址
smit chgenet配置网卡设备
smit rminet删除网卡接口
smit etherchannel配置网卡绑定
smit inet配置网卡接口，包括mkinet,chinet,rminet等命令入口