ALM/QC 11.5,11,10 安装环境的硬件要求和软件要求
来源:互联网 发布:网络分层及其对应协议 编辑:程序博客网 时间:2024/06/05 16:00
Overview
HP ALM, HP ALM Essentials, and HP Quality Center Enterprise (Technology Preview) 11.50
SYSTEM REQUIREMENTSThis page provides our recommended and supported environments for HP ALM, HP ALM Essentials and HP Quality Center Enterprise (Technology Preview) version 11.50. It also covers HP ALM and HP Quality Center Enterprise version 11.00 and HP Quality Center Premier and HP Quality Center Enterprise version 10.00. The environments list the minimum patch level required for support.NOTE: Quality Center 11.5 has been released in Technology Preview mode and is NOT GA. To download QC 11.50 Technology Preview, visit the QC Tech Preview support forum.
If you are a HP Performance Center customer, the detailed system requirements are available here (http://h18004.www1.hp.com/products/quickspecs/14418_div/14418_div.html)
HP ALM Upgrade Best Practices Guide**
HP ALM Performance and Benchmark Kit**
** The above listed documents still point to version 11 guides and shall be updated to v11.5 as soon as they are available.
Server-Side System Requirements
Following are the server system configurations for installing HP ALM 11.50, HP ALM Essentials, and HP Quality Center Enterprise (Technology Preview) 11.50 on Windows, Linux, and Solaris.
Please note that these requirements do not apply if you are utilizing Managed Software Solutions for HP ALM or HP Quality Center Enterprise. In that case, the Managed Software Solutions team provides a hosted version of HP ALM or HP Quality Center Enterprise, so the only requirements are the Client-Side System Requirements listed below.
Hardware Minimum RequirementsCPUWindows: Quad Core AMD64 processor or equivalent x86-compatible processorLinux: Quad Core AMD64 processor or equivalent x86-compatible processorSolaris: SPARC architecture required (x86 architecture is NOT supported)Memory (RAM)8 GB minimumFree disk space8 GB minimum Recommended EnvironmentsThe following table includes recommended configurations for each operating system.
Operating System
DB ServerWeb ServerThe Application server functionality is now built-in to the ALM/QC platform and there is no need to install a third party application server (WebLogic, WebSphere, and JBoss) from version 11.50 onwards. The HP ALM application server uses JDK6 (1.6) and supports 64 bit JVM.
Database ServersRequires HP PatchOracle 10.2.0.5
Oracle 11.2.0.3 SQL 2005 SP4SQL 2008 R2 SP1 NOTE: All database servers, unless otherwise stated, have been validated on 64 bit configurations. Web ServersRequires HP PatchApache 2.2 IIS7IIS 7.5 NOTE: By default application servers include HTTP servers. If you need additional functionality a web server can be added. Virtual EnvironmentsVMWare ESX/ESXi Server 5.0 and higher.HP ALM/QC is certified to work with VMWare ESX/ESXi. Due to the rapidly evolving architectures provided by Virtualization vendors as long as the above stated vendor guarantees full compatibility of the virtualized environment to the HP ALM/QC approved system requirements for physical hardware, then HP ALM/QC will function as designed. Client-Side System RequirementsThis section describes the client system configurations for installing an HP ALM, HP ALM Essentials or HP Quality Center Enterprise (Technology Preview) client for version 11.50.
CPU
Core duo 1.6 Ghz (or higher) or equivalent compatible processor- Visual C++ 2005 SP1 ATL Security Update Redistributable
- Microsoft .NET Framework 4
- Microsoft Office 2010 (recommended)
- Windows XP (SP3) 32 bit
- Windows 7 (SP1) 32 bit (recommended)
- Windows 7 (SP1) 64 bit
- Windows 2008 R2 SP1
- Windows Server 2008 SP2 32 bit
- Windows Server 2008 SP2 64 bit
NOTES:
If you are integrating Quality Center with other HP testing tools, you must modify the DCOM permissions on your client machine. Note: DCOM is not required for running Functional test sets (server-side execution). Functional test sets are available only in ALM Edition
HP ALM/QC Client on Windows 64 bit runs in WOW64 mode
You can work with the HP ALM/QC client using a remote desktop
MS Terminal Services, Citrix
ALM/QC is certified to work in a virtualized environment. With the rapidly evolving architectures provided by virtualization vendors as long as the above listed vendors guarantee full compatibility of the virtualized environment to the HP ALM/QC approved system requirements for physical hardware, HP ALM/QC will function as designed.
Microsoft Internet Explorer 8
Microsoft Internet Explorer 9
NOTE: For customers who have restrictions on plugins in their browsers, such as ActiveX, HP ALM/QC can be loaded in the HP ALM Explorer Add-In. For more information on downloading and installing the Add-In, refer to the HP Application Lifecycle Management Installation Guide.
Office CompatibilityMicrosoft Office 2007 SP2Microsoft Office 2010 (recommended)
NOTE: Only 32 bit versions of MS Office supported
NOTE: Supported resolution is 1024x768 with DPI of 100%
HP ALM 11.50, HP ALM Essentials, and HP Quality Center Enterprise (Technology Preview) 11.50 have been tested against FDCC regulations.
HP ALM 11.00 and HP Quality Center Enterprise 11.00 SYSTEM REQUIREMENTSThis page provides our recommended and supported environments for HP ALM and HP Quality Center Enterprise version 11.00 and HP Quality Center Premier and HP Quality Center Enterprise version 10.00. The environments list the minimum patch level required for support.
Server-Side System Requirements
Following are the server system configurations for installing HP ALM 11.00 and HP Quality Center Enterprise 11.00 on Windows, Linux, and Solaris.
Please note that these requirements do not apply if you are utilizing Managed Software Solutions for HP ALM or HP Quality Center Enterprise. In that case, the Managed Software Solutions team provides a hosted version of HP ALM or HP Quality Center Enterprise, so the only requirements are the Client-Side System Requirements listed below.
HP ALM Upgrade Best Practices Guide
HP ALM Performance and Benchmark Kit
Hardware Minimum RequirementsCPUWindows: Quad Core AMD64 processor or equivalent x86-compatible processorLinux: Quad Core AMD64 processor or equivalent x86-compatible processorSolaris: SPARC architecture required (x86 architecture is NOT supported)Memory (RAM)4 GB minimumFree disk space8 GB minimum Recommended EnvironmentsThe following table includes recommended configurations for each operating system.
Operating System
App ServerDB ServerWeb ServerWindows Server 2008 SP2 (64 bit)
Windows Server 2008 R2 (64 bit)Windows Server 2008 R2 SP1 (64 bit)Patch 2 required for Windows Server 2008 R2Patch 6 required for Windows Server 2008 R2 SP1
Patch 9 for Linux Red Hat 5.7
Patch 10 for Linux Red Hat 5.8
Patch 9 for Oracle Linux 5.7
Patch 10 for Oracle Linux 5.8NOTE: For large production deployments it is recommended that ALM/QC be deployed on 64 bit systems. Application Servers
NOTES:
* Both standard and enterprise editions of WebLogic are supported as long as there are no infrastructure changes with each dot release.
** WebSphere dot releases supported as long as there are no infrastructure changes with those.
*** ALM/QC 11 supports application servers which run JDK6 and 64 bit JVM .
Oracle 10.2.0.4
Oracle 11.2.0.1Oracle 11.2.0.2Oracle 11.2.0.3Oracle 11.2.0.2 Requires Patch 6Oracle 11.2.0.2 Requires Patch 9SQL 2005 SP3SQL 2005 SP4SQL 2008 SP1SQL 2008 SP2SQL 2008 SP3SQL 2008 R2 SP1SQL 2008 SP2 Requires Patch 6
SQL 2008 SP3 Requires Patch 10
SQL 2008 R2 SP1 Requires SP2
SQL 2005 SP4 Requires SP3NOTE: All database servers, unless otherwise stated, have been validated on 64 bit configurations. Web ServersRequires HP PatchApache 2.2 IIS6IIS7IIS 7.5IIS 7.5 Requires Patch 6IHS Server NOTE: By default application servers include HTTP servers. If you need additional functionality a web server can be added. Virtual EnvironmentsRequires HP PatchVMware ESX 4.0Patch 1VMware ESX 4.1Patch 6Citrix XenApp 6.0 Virtual EnvironmentsVMWare ESX/ESXi Server 5.0 and higher.
HP ALM/QC is certified to work with VMWare ESX/ESXi. Due to the rapidly evolving architectures provided by Virtualization vendors as long as the above stated vendor guarantees full compatibility of the virtualized environment to the HP ALM/QC approved system requirements for physical hardware, then HP ALM/QC will function as designed.Server System Configurations for Starter EditionThis section describes the server system configurations for installing a Quality Center Starter Edition server.
Operating System
Database ServerApplication and Web ServerWindows Server 2008 (SP2)
NOTE: Installed during the installation process. If SQL Server 2005 or 2008 is already installed on the server machine, you can instruct Quality Center to use it, by providing the administrator name and password.
JBoss
NOTE: Installed during the installation process.
NOTE: For prerequisites and client side requirements for QC Starter 11 clients refer below. Client-Side System RequirementsThis section describes the client system configurations for installing an HP ALM or HP Quality Center Enterprise client or QC Starter Edition 11 clients.CPU
Core duo 1.6 Ghz (or higher) or equivalent compatible processor- Visual C++ 2005 SP1 ATL Security Update Redistributable
- Microsoft .NET Framework 3.5 (SP1)
- Microsoft Office 2007 (SP2) (recommended)
- Windows XP (SP3) 32 bit
- Window Vista (SP1) 32 bit
- Window Vista (SP2) 32 bit, requires patch 6
- Windows 7 32 bit (recommended)
- Windows 7 64 bit, requires patch 2
- Windows 7 (SP1) 64 bit, requires patch 6
- Windows 7 (SP1) 32 bit, requires patch 9
- Windows 2008 R2 requires patch 1
- Windows 2008 R2 SP1 requires patch SP3 ( Do NOT use BPT as it is not certified for this)
- Windows 2003 SP2 requires patch 3
- Windows Server 2008 SP2 32 bit, requires patch SP2
NOTES:
If you are integrating Quality Center with other HP testing tools, you must modify the DCOM permissions on your client machine.
ALM/QC Client on Windows 7 64 bit runs in WOW64 mode (details in patch 2 Readme file).
You can work with the Quality Center client using a remote desktop
Certified to run on Citrix XenApp 6.0. Citrix Client with XenApp 6.0: Online Plug-In 12.1.
Also certified to run on VMware ESX 4.0 ( Patch 1) and VMware ESX 4.1 (Patch 6)
VMware ESX 5.0 and ESXi 5.0 (SP3)
HP ALM/QC is certified to work with VMWare ESX/ESXi. Due to the rapidly evolving architectures provided by Virtualization vendors as long as the above stated vendor guarantees full compatibility of the virtualized environment to the HP ALM/QC approved system requirements for physical hardware, then HP ALM/QC will function as designed.Browser
Microsoft Internet Explorer 7 or 8
Microsoft Internet Explorer 9 (requires SP2)
NOTE: For customers who have restrictions on plugins in their browsers, such as ActiveX, ALM can be loaded in the HP ALM Explorer Add-in. For more information on downloading and installing the add-in, refer to the HP Application Lifecycle Management Installation Guide.
Office CompatibilityMicrosoft Office 2007 SP2 (recommended)Microsoft Office 2010 (requires Patch 3)
NOTE: Only 32 bit versions of MS Office supported
NOTE: Supported resolution is 1024x768 with DPI of 100%
QC11.00 and ALM 11.00 have been tested against FDCC regulations
HP Quality Center 10.00
Server-Side System Requirements
Following are the server system configurations for installing HP Quality Center Premier 10.00 and HP Quality Center Enterprise 10.00 on Windows, Linux, and Solaris.
Hardware Minimum Requirements
CPU
Windows: Quad Core AMD64 processor or equivalent x86-compatible processorLinux: Quad Core AMD64 processor or equivalent x86-compatible processorSolaris: SPARC architecture required (x86 architecture is NOT supported)Operating System
Application ServerDatabase ServerWeb Server
Windows Server 2003 SP2 (32 and 64 bit)
Windows Server 2008 (32 and 64 bit)Windows Server 2003 R2 SP2 (32 bit and 64 bit)Windows Server 2008 R2 (64 bit)Windows Server 2008 R2 SP1 (64 bit)Patch 4 required for Windows Server 2003 R2 SP2Patch 22 required for Windows Server 2008 R2
Patch 27 required for Windows Server 2008 R2 SP1 (for installation challenges - request KM1269322 - Internal HP KM from Support
* Both standard and enterprise editions of WebLogic are supported as long as there are no infrastructure changes with each dot release.
** QC 10 supports application servers which run on JDK5 and 32bit JVM.
*** WebSphere dot releases supported as long as there are no infrastructure changes with those. Database Servers Requires HP Patch
Oracle 9.2.0.6
Oracle 10.2.0.3Oracle 10.2.0.4Oracle 11.2.0.1Oracle 11.2.0.2Patch 16 required for Oracle 10.2.0.4 and 11.2.0.1Patch 27 required for Oracle 11.2.0.2SQL 2005 SP2SQL 2005 SP3SQL 2008 SP1SQL 2008 SP2SQL 2008 R2 SP1Patch 8 required for SQL 2005 SP3
Patch 12 required for SQL 2008 SP1
Patch 25 required for SQL 2008 SP2
Patch 30 required for SQL 2008 R2 SP1NOTE: All database servers, unless otherwise stated, have been validated on 32 bit configurations. Web ServersRequires HP PatchApache 2.x IIS6IIS 7.0Patch 22 required for IIS 7.0IHS Server NOTE: By default application servers include HTTP servers. If you need additional functionality a web server can be added. Virtual EnvironmentsRequires HP PatchVMware ESX 3.6 VMware ESX 4.0requires HP patch 16VMware ESX 4.1requires HP patch 27Citrix 4.0 Citrix Server MetaFrame XP FR3 on Windows 2003 Citrix XenApp 6.0requires patch 25 Server System Configurations for Starter EditionThis section describes the server system configurations for installing a Quality Center Starter Edition server.
Operating System
Database ServerApplication and Web ServerRequires HP PatchNOTE: Installed during the installation process. If SQL Server 2005 or 2008 is already installed on the server machine, you can instruct Quality Center to use it, by providing the administrator name and password.
JBoss
NOTE: Installed during the installation process.
NOTE: Installed during the installation process. If SQL Server 2005 or 2008 is already installed on the server machine, you can instruct Quality Center to use it, by providing the administrator name and password.JBoss
NOTE: Installed during the installation process.Patch 5NOTE: For prerequisites and client side requirements for QC Starter 10 clients refer below. Client-Side System RequirementsThis section describes the client system configurations for installing an HP ALM or HP Quality Center Enterprise client or QC Starter Edition 10 clients.
CPU
Pentium IVFor all OS versions:
- Microsoft CAPICOM (digital signing technology component) 2.1.0.2
- Microsoft .NET Framework 3.5 or later
- Visual C++ 2005 Redistributable
- Microsoft Office 2003 or later version
- Windows XP SP2 (32 bit)
- Windows XP SP3 (32 bit) (recommended)
- Window Vista SP1 (32 bit)
- Window Vista SP2 (32 bit) , requires patch 27
- Windows 2000 (32 bit)
- Windows 2008 R2 , requires patch 25
- Windows 7 (32 bit), requires patch 12
- Windows 7 (64 bit), requires patch 18
- Windows 7 SP1 (64 bit), requires patch 30
NOTES:
If you are integrating Quality Center with other HP testing tools, you must modify the DCOM permissions on your client machine.
ALM/QC Client on Windows 7 64 bit runs in WOW64 mode for details see the patch 18 Readme file.
You can work with the Quality Center client using a remote desktop
- Citrix 4.0
- Citrix Server MetaFrame XP FR3 on Windows 2003
- Citrix Client: Program Neighborhood, Version 8 on Windows XP SP2
- Citrix XenApp 6.0 (requires patch 25)
- Also certified to run on VMware ESX 3.6, VMware ESX 4.0 ( Patch 16) and VMware ESX 4.1 (Patch 27)
- Microsoft Internet Explorer 6.0 SP1
- Microsoft Internet Explorer 7
- Microsoft Internet Explorer 8, requires patch 5
- Microsoft Internet Explorer 9, requires patch 23
- Microsoft Office 2003 (recommended)
- Microsoft Office 2007
- Microsoft Office 2010 (requires patch 23)
NOTE: Only 32 bit versions of MS Office supported
- ALM/QC 11.5,11,10 安装环境的硬件要求和软件要求
- 安装 SQL Server 2005 的硬件和软件要求
- 安装 SQL Server 2005 的硬件和软件要求
- 安装 配置SharePoint Server 2016 的硬件和软件要求
- SharePoint 2013 的硬件和软件要求
- 安装10gR2的硬件要求
- 安装Vista的硬件要求
- Zabbix硬件、软件要求
- Visual Studio 2013性能和负载测试的硬件和软件要求
- Ellipse4SL 的安装包和环境配置要求
- Redmine安装环境要求
- 硬件要求
- IntelliJ IDEA的安装环境要求
- IntelliJ IDEA的安装环境要求
- 软件测试岗位要求和知识面要求
- 一些操作系统的硬件要求
- IntelliJ IDEA 的硬件要求
- QC ALM 11 邮箱设置
- C++ 标准库 vector list map使用方法
- .padLeft() and .padRight()
- struts2配置文件
- ubuntu12.04 安装 uWsgi
- 关于虚函数的那些事
- ALM/QC 11.5,11,10 安装环境的硬件要求和软件要求
- 杭电OJ题 1678 Shopaholic 解题报告
- Ubuntu下xxx is not in sudoers file的一个解决方案
- struts2数据校验
- Jexus web server V5.2 正式发布
- Apache与PHP版本选择
- RPM包rpmbuild SPEC文件深度说明
- [H1B/H4] H1B, H4 分别面签成功(广州)分享帖
- 制作RPM包