按某一字段分组取最大(小)值所在行的数据
来源:互联网 发布:淘宝直播是不是很赚钱 编辑:程序博客网 时间:2024/05/21 09:35
转载请注明:http://www.pmjava.com/Article/ShowInfo.asp?ID=56703
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--创建表并插入数据:
create table tb(name varchar(10),valint,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go
--一、按name分组取val最大的值所在行的数据。
--方法1:
select a.*from tb a where val = (selectmax(val) from tb where name= a.name) order by a.name
--方法2:
select a.*from tb a where notexists(select1from tb where name = a.name and val> a.val)
--方法3:
select a.*from tb a,(select name,max(val) valfrom tb group by name) bwhere a.name= b.name and a.val = b.valorder by a.name
--方法4:
select a.*from tb a inner join (select name ,max(val) valfrom tb group by name) bon a.name = b.name and a.val= b.val order by a.name
--方法5
select a.*from tb a where 1> (selectcount(*)from tb where name = a.name and val> a.val ) order by a.name
/*
name val memo
---------- ----------- --------------------
a 3 a3:a的第三个值
b 5 b5b5b5b5b5
*/
--二、按name分组取val最小的值所在行的数据。
--方法1:
select a.*from tb a where val = (selectmin(val) from tb where name= a.name) order by a.name
--方法2:
select a.*from tb a where notexists(select1from tb where name = a.name and val< a.val)
--方法3:
select a.*from tb a,(select name,min(val) valfrom tb group by name) bwhere a.name= b.name and a.val = b.valorder by a.name
--方法4:
select a.*from tb a inner join (select name ,min(val) valfrom tb group by name) bon a.name = b.name and a.val= b.val order by a.name
--方法5
select a.*from tb a where 1> (selectcount(*)from tb where name = a.name and val< a.val) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
*/
--三、按name分组取第一次出现的行所在的数据。
select a.*from tb a where val = (selecttop 1 valfrom tb where name = a.name) orderby a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
*/
--四、按name分组随机取一条数据。
select a.*from tb a where val = (selecttop 1 valfrom tb where name = a.name orderby newid())order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 5 b5b5b5b5b5
*/
--五、按name分组取最小的两个(N个)val
select a.*from tb a where 2> (selectcount(*)from tb where name = a.name and val< a.val ) order by a.name,a.val
select a.*from tb a where val in (selecttop 2 valfrom tb where name=a.nameorder by val) orderby a.name,a.val
select a.*from tb a where exists (selectcount(*)from tb where name = a.name and val< a.val having Count(*)< 2)order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
b 2 b2b2b2b2
*/
--六、按name分组取最大的两个(N个)val
select a.*from tb a where 2> (selectcount(*)from tb where name = a.name and val> a.val ) order by a.name,a.val
select a.*from tb a where val in (selecttop 2 valfrom tb where name=a.nameorder by val desc)order by a.name,a.val
select a.*from tb a where exists (selectcount(*)from tb where name = a.name and val> a.val having Count(*)< 2)order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
a 3 a3:a的第三个值
b 4 b4b4
b 5 b5b5b5b5b5
*/
--七,如果整行数据有重复,所有的列都相同。
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 1 a1--a的第一个值
a 3 a3:a的第三个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--在sql server 2000中只能用一个临时表来解决,生成一个自增列,先对val取最大或最小,然后再通过自增列来取数据。
--创建表并插入数据:
create table tb(name varchar(10),valint,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go
select * , px =identity(int,1,1)into tmp from tb
select m.name,m.val,m.memofrom
(
select t.*from tmp t where val = (selectmin(val) from tmp where name= t.name)
) m where px= (selectmin(px) from
(
select t.*from tmp t where val = (selectmin(val) from tmp where name= t.name)
) n where n.name= m.name)
drop table tb,tmp
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
(2 行受影响)
*/
--在sql server 2005中可以使用row_number函数,不需要使用临时表。
--创建表并插入数据:
create table tb(name varchar(10),valint,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go
select m.name,m.val,m.memofrom
(
select * , px = row_number()over(orderby name , val)from tb
) m where px= (selectmin(px) from
(
select * , px = row_number()over(orderby name , val)from tb
) n where n.name= m.name)
drop table tb
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
(2 行受影响)
*/
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--创建表并插入数据:
create table tb(name varchar(10),valint,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go
--一、按name分组取val最大的值所在行的数据。
--方法1:
select a.*from tb a where val = (selectmax(val) from tb where name= a.name) order by a.name
--方法2:
select a.*from tb a where notexists(select1from tb where name = a.name and val> a.val)
--方法3:
select a.*from tb a,(select name,max(val) valfrom tb group by name) bwhere a.name= b.name and a.val = b.valorder by a.name
--方法4:
select a.*from tb a inner join (select name ,max(val) valfrom tb group by name) bon a.name = b.name and a.val= b.val order by a.name
--方法5
select a.*from tb a where 1> (selectcount(*)from tb where name = a.name and val> a.val ) order by a.name
/*
name val memo
---------- ----------- --------------------
a 3 a3:a的第三个值
b 5 b5b5b5b5b5
*/
--二、按name分组取val最小的值所在行的数据。
--方法1:
select a.*from tb a where val = (selectmin(val) from tb where name= a.name) order by a.name
--方法2:
select a.*from tb a where notexists(select1from tb where name = a.name and val< a.val)
--方法3:
select a.*from tb a,(select name,min(val) valfrom tb group by name) bwhere a.name= b.name and a.val = b.valorder by a.name
--方法4:
select a.*from tb a inner join (select name ,min(val) valfrom tb group by name) bon a.name = b.name and a.val= b.val order by a.name
--方法5
select a.*from tb a where 1> (selectcount(*)from tb where name = a.name and val< a.val) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
*/
--三、按name分组取第一次出现的行所在的数据。
select a.*from tb a where val = (selecttop 1 valfrom tb where name = a.name) orderby a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
*/
--四、按name分组随机取一条数据。
select a.*from tb a where val = (selecttop 1 valfrom tb where name = a.name orderby newid())order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 5 b5b5b5b5b5
*/
--五、按name分组取最小的两个(N个)val
select a.*from tb a where 2> (selectcount(*)from tb where name = a.name and val< a.val ) order by a.name,a.val
select a.*from tb a where val in (selecttop 2 valfrom tb where name=a.nameorder by val) orderby a.name,a.val
select a.*from tb a where exists (selectcount(*)from tb where name = a.name and val< a.val having Count(*)< 2)order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
b 2 b2b2b2b2
*/
--六、按name分组取最大的两个(N个)val
select a.*from tb a where 2> (selectcount(*)from tb where name = a.name and val> a.val ) order by a.name,a.val
select a.*from tb a where val in (selecttop 2 valfrom tb where name=a.nameorder by val desc)order by a.name,a.val
select a.*from tb a where exists (selectcount(*)from tb where name = a.name and val> a.val having Count(*)< 2)order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
a 3 a3:a的第三个值
b 4 b4b4
b 5 b5b5b5b5b5
*/
--七,如果整行数据有重复,所有的列都相同。
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 1 a1--a的第一个值
a 3 a3:a的第三个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--在sql server 2000中只能用一个临时表来解决,生成一个自增列,先对val取最大或最小,然后再通过自增列来取数据。
--创建表并插入数据:
create table tb(name varchar(10),valint,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go
select * , px =identity(int,1,1)into tmp from tb
select m.name,m.val,m.memofrom
(
select t.*from tmp t where val = (selectmin(val) from tmp where name= t.name)
) m where px= (selectmin(px) from
(
select t.*from tmp t where val = (selectmin(val) from tmp where name= t.name)
) n where n.name= m.name)
drop table tb,tmp
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
(2 行受影响)
*/
--在sql server 2005中可以使用row_number函数,不需要使用临时表。
--创建表并插入数据:
create table tb(name varchar(10),valint,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go
select m.name,m.val,m.memofrom
(
select * , px = row_number()over(orderby name , val)from tb
) m where px= (selectmin(px) from
(
select * , px = row_number()over(orderby name , val)from tb
) n where n.name= m.name)
drop table tb
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
(2 行受影响)
*/
- 按某一字段分组取最大(小)值所在行的数据(sql server)
- 按某一字段分组取最大(小)值所在行的数据
- --按某一字段分组取最大(小)值所在行的数据
- 按某一字段分组取最大(小)值所在行的数据
- 按某一字段分组取最大(小)值所在行的数据
- 按某一字段分组取最大(小)值所在行的数据
- 按某一字段分组取最大(小)值所在行的数据
- 按某一字段分组取最大(小)值所在行的数据
- 按某一字段分组取最大(小)值所在行的数据
- 按某一字段分组取最大(小)值所在行的数据
- 按某一字段分组取最大(小)值所在行的数据
- 按某一字段分组取最大(小)值所在行的数据(转帖)
- 按某一字段分组取最大(小)值所在行的数据
- 按某一字段分组取最大(小)值所在行的数据
- SQL Server 按某一字段分组取最大(小)值所在行的数据
- 按某一字段分组取最大(小)值所在行的数据
- 【SQL精彩语句】按某一字段分组取最大(小)值所在行的数据
- 按某一字段分组取最大(小)值所在行的数据
- android 在待机状态下显示某一个activity
- hdu 1158 Employment Planning(DP)
- http协议备份
- vmware添加新硬盘 挂载新硬盘 硬盘扩容
- [HBase] Hbase Coprocessors
- 按某一字段分组取最大(小)值所在行的数据
- xcode3.2.x和xcode4.2.1在lion上并存
- Android Binder设计与实现 – 设计篇
- <红泪集> 之 爸爸
- 解决Ubuntu “只能同时运行一个更新管理器”
- 使用SurfaceView实现异步动画绘图的小实例
- 26个jquery实用技巧
- C语言实现UDP打洞
- C# WinForm获取当前路径汇总