LFI US language error message file

/ $Header: lfius.msg 11-jan-2008.03:14:17 madhanap Exp $
/
/ Copyright (c) 1993, 2003, Oracle.  All rights reserved.
/   NAME
/     lfius.msg - LFI US language error message file
/   DESCRIPTION
/     Error message file for LFI package
/   RETURNS
/
/   NOTES
/     <other useful comments, qualifications, etc.>
/
/ LFI Error Messages
/
/
// 00000, 00000, "Normal, successful completion."
// *Cause:      Normal exit
//
// *Action:     None
//
// 00001, 00000, "File IO Internal Error #%ld"
// *Cause:      An internal error occurred.
//
// *Action:     Contact the development organization.
//
/
/
/ Generic errors
/
/
00002, 00000, "Out of memory. %s"
// *Cause:      The File IO package failed in trying to dynamically allocate
//              memory. function name  is used for additional comments to
//              indicate where, when and why the error occured.
//

// *Action:     Perform whatever actions necessary to make more memory available
//              to the executing program.
//
00003, 00000, "Internal exception code. icode = [%s], [%s]."
// *Cause:      Unknown - indicated by parameters. The first '%s' gives
//              the internal exception code; the second is for any other
//              additional comments.
//
// *Action:     Report to the appropriate development group
//
00004, 00000, "Call to %s failed."
// *Cause:      A function call has failed.  This error is a generic
//              message to show that the exception has occurred in a
//              particular function function name.  This allows the client to
//              know the trace runtime calling sequence by examining the
//              exception stack.
//
// *Action:     See the accompanying error messages for more information.

//
00005, 00000, "Free some memory failed in %s."
// *Cause:      A call to free some memory in function function name has failed.
//
// *Action:     See the accompanying error messages for more information and
//              contact Oracle Worldwide Support immediately.
//
00006, 00000, "Invalid parameter to function %s."
// *Cause:      The function was called with an invalid parameter.
//
// *Action:     Check the function call to make sure that the correct
//              parameters are being passed.
//
00007, 00000, "NLSRTL's call failed. %s."
// *Cause:      LX calls return failure
//
// *Action:     Check if our parameters are correct.  Contact the
//              appropriate group immediately if we parameters are valid.

//
00008, 00000, "SLTS's initializing/terminating mutex failed for %s."
// *Cause:      SLTS's call return failure in function '%s'.
//
// *Action:     Contact the appropriate development group.
//
//
/
/ 100-999 Reserved for LFI Public interface errors
/
/
00100, 00000, "Unable to perform operation, file not opened in %s."
// *Cause:      The file has not been successfully opened at the time the
//              operation is attempted.
//
// *Action:     Check to make sure that the file exists (for read) or that
//              the program has access to the write a file (for write).
//              It is also possible that the file was just never opened

//
00101, 00000, "Write failed, file cannot be written to."
// *Cause:      The buffer write operation failed.  Possibly due to incorrect
//              parameters being passed in.
//
// *Action: Check the underlying error for more information.
//
00102, 00000, "Unable to seek in sequentially accessed file."
// *Cause:      The file was opened with the flag LFILFA_SEQ for sequential
//              file operations.  Use seek only on files that are
//              opened with the LFILFA_RANDOM flag for random access.
//
// *Action:     Check to see how the file is being opened and accessed and
//              make the two operations consistent (that is, make them both
//              operations either sequential or random).
//
00103, 00000, "Seek operation failed."
// *Cause:      The buffer seek operation failed.  Probably due to incorrect

//              parameters or flags.
//
// *Action:     Check syntax of the seek command and retry the operation.
//
00104, 00000, "Read operation failed."
// *Cause:      The buffer read operation failed.  Probably due to incorrect
//              parameters or flags.
//
// *Action:     Check syntax of the read command and retry the operation.
//
00105, 00000, "Unable to add path."
// *Cause:      One of the following might have caused the error:
//                 the current path might not be in the proper format
//                 the directory might not be in the proper format
//                 the name object might not have been initialized properly
//
// *Action:     Check the format of the current path and the new directory;
//              check that the name object was initialized properly.

//
00106, 00000, "Path object holds more than one path."
// *Cause:      The path object passed to lfippth() holds more than
//              one path.
//
// *Action:     Make sure that the path object used in lfippth() holds
//              only one path.
//
00107, 00000, "Open does not expect the file [%s][%s] to exist."
// *Cause:      The flags specified for the open indicate that the file does
//              not exist. However, the file does exist.
//
// *Action:     Check to make sure that the options that were specified for
//              the file are correct and that you do not expect that the file
//              should exist.  If so then find out why the file does exist.
//
00108, 00000, "Open expect the file [%s][%s] to exist."
// *Cause:      The flags specified for the open indicate that the file
//              the file to exist and it does not.
//
// *Action:     Check to make sure that the options that were specified for
//              the file are correct and that you expect that the file
//              should exist.  If so then find out why the file doesn't.
//
00109, 00000, "Unable to open file [%s][%s].  %s."
// *Cause:      Either:
//                the process does not have the proper access rights to open
//                  the file
//                the file is already open
//
// *Action:     Check to make sure the proper access permissions are assigned.
//              If they are and the file still cannot be opened, then
//              contact Oracle Worldwide Support.
//
00110, 00000, "Unable to initialize the Buffer Manager."
// *Cause:      The Buffer Manager initialization routine failed; probably
//              because memory was exhausted.
//
// *Action:     See the accompanying error messages for more information.
//
00111, 00000, "No other flags allowed in fixed length format."
// *Cause:      Other options are specified with the fixed length format.
//
// *Action:     Clear other options from flag.
//
//
// 00112, 00000, "Invalid Standard File ID Descriptor."
// *Cause:      The function lfigfo() was called with an invalid File ID
//              Descriptor.  The valid File ID Descriptors are LFISTDIN,
//              LFISTDOUT, and LFISTDERR.
//
// *Action:     Check the call to lfigfo() to make sure it is correct.
//
00113, 00000, "Unable to initialize the Standard File object %s."
// *Cause:      The call to open the standard file object failed.
//
// *Action:     Check the underlying errors for more information.
//
00114, 00000, "Append is not allowed with %s."
// *Cause:      Attempting to append using certain options.
//
// *Action:     Check the flag options to verify its usage.
//
//
00115, 00000, "Buffer free failed."
// *Cause:      Probably do to the buffer flush failing.
//
// *Action:     See the accompanying error messages for more information.
//
00116, 00000, "Unable to close file in operation %s."
// *Cause:      The file close operation failed.
/ *Action:     See the accompanying error messages for more information.
//
00117, 00000, "Unable to rename file."
// *Cause:      The rename operation failed.  Rename is called when we are
//              protecting a file by operating on a temp file.
//
// *Action:     Check to make sure that the process has the correct
//              access rights to perform a rename.
//
00118, 00000, "Unable to change type to Unknown."
// *Cause:      The function lfichty() was called to change the file
//              extension to LFIEXUNK (Unknown).  This is not a valid
//              operation.
//
// *Action:     Check why you are doing this.  If the extension is already
//              unknown then you do not need to do this.  If you just want
//              no extension then use the extension type LFIEXNONE.
119, 00000, "Unable to Abort an Unprotected file."
// *Cause:      The Abort function lfiabt() was called on a file that
//              was not opened as a protected file.  As such the abort
//              operation is not valid.
//
// *Action:     Check to see if you intended to open the file as a protected
//              file.
//
00120, 00000, "Unable to parse root filename %s."
// *Cause:      The root filename that was given to lfimknam() is not in a
//              format that this platform understands.
//
// *Action:     Check the format of the filename and retry the operation.
//
00121, 00000, "Only one of REPLACE, or PROT allowed for opty."
// *Cause:      Two or more of the following open type options were
//              specified for the lfilini() function: LFILOPTY_REPLACE,
//              or LFILOPTY_PROT.

//
// *Action:     Remove one or more the of options such that you are only
//              passing in one of the three.
//
00122, 00000, "Can only delete a file if we create it."
// *Cause:      The delete file flag was specified for a file that was not
//              created by this file operation.  The ability to delete a
//              file is not portable.  As such the only deletion that
//              is allowed by this package is if we know we want to delete
//              the file when we create it.
//
// *Action:     You can only delete a file that you create.  If you need
//              to delete a file that you do not create then you will have
//              to find another means of doing so.
//
00123, 00000, "Cannot access file Sequentially and Randomly."
// *Cause:      Both the LFILFA_SEQ (sequential) and LFILFA_RANDOM (random)
//              flags were specified during the file object creation.  This
//              is not allowed.  Only one of the two may be specified.
//
// *Action:     Choose how you wish to access the file.  If you choose
//              random you can still access sequentially by just not using
//              the repositioning functions.
//
00124, 00000, "No access mode was specified, default is sequential."
// *Cause:      Neither LFILFA_SEQ (sequential) or LFILFA_RANDOM (random) were
//              specified during file object creation.
//
// *Action:     The default is sequential but this should be explicitly set.
//
00125, 00000, "Random access only allowed on fixed length record files."
// *Cause:      The LFILFA_RANDOM flag was specified on a file that was
//              not organized into fixed-length records.  Random access
//              is only allowed on fixed-length record files.
//
// *Action:     Determine if the organization of your data needs to be in
              variable-length records and if you need to have random
//              access to the file.  If both conditions are true then
//              you might need to buffer the entire file or enough of it
//              to remove your need for random access.  Another option is
//              to close and rescan the file although this is not the
//              optimal solution.
//
00126, 00000, "Record format can only be one of Fixed or Variable."
// *Cause:      Both LFILRF_FIXED (fixed) and LFILRF_VAR (variable) were
//              specified during file object creation. Only one of the two is
//              allowed for a given file.
//
// *Action:     Determine how the file is organized and choose the option
//              that matches.
//
00127, 00000, "No Record Format was specified, default is variable."
// *Cause:      Neither LFILRF_FIXED (fixed) or LFILRF_VAR (variable) were
//              specified for record format.  One of the two must be specified
//              for each file.
//
// *Action:     The default is LFILRF_VAR, but this should be explicitly set
//              during file object creation.
//
00128, 00000, "Carriage Control is only valid for Standard file objects."
// *Cause:      The Carriage Control option is only valid for the
//              standard file objects (LFISTDIN, LFISTDOUT, LFISTDERR).
//              You may not specify this option for any other type of file.
//
// *Action:     Choose between LFILRF_FIXED and LFILRF_VAR for the record
//              format.
//
00129, 00000, "Invalid option %s were specified on an input only file."
// *Cause:      The file was opened as input only but the output mode
//              option LFILRF_WR_ASIS or delete option LFLOPTY_DELETE
//              was specified.
ction:     Check to see how you intend to open this file and make the
//              necessary changes.
//
00130, 00000, "Input option specified on output only file."
// *Cause:      The file was opened as output only but one of the input
//              mode options (LFILRF_READ_NL or LFILRF_FORCE_NL) or was
//              specified.
//
// *Action:     Check to see how you intend to open this file and make the
//              necessary changes.
//
00131, 00000, "No open type specified."
// *Cause:      The file object was created without an open type (that is,
//              LFILOPTY_INPUT, LFILOPTY_OUTPUT, etc.).
//
// *Action:     Decide how the file should be accessed and specify one of
//              the open types.
//
00132, 00000, "Record length %s is greater than max length of %s."
// *Cause:      The record length specified for the file is greater than
//              the max supported by this platform.
//
// *Action:     Decrease the record length.
//
00133, 00000, "Trying to create file %s that already exists."
// *Cause:      The file object was initialized with LFILOPTY_OUTPUT and
//              without LFILOPTY_REPLACE and yet a file by this name already
//              exists.
//
// *Action:     Check to make sure that you are creating the right file.  If
//              you intend to overwrite the file if it exists that specify the
//              replace option LFILOPTY_REPLACE when initializing the file
//              object.
//
00134, 00000, "Unable to protect a file for an append operation."
// *Cause:      The LFILOPTY_APPEND and LFILOPTY_PROT options were both
          specified for the file.  This is currently not allowed because
//              it would require copying the entire file at open time.
//
// *Action:     Decide if you really need to protect the file for append.  If
//              so then think about making a copy of it before appending.
//
00135, 00000, "Unable to remove temporary file."
// *Cause:      A temporary file was created to protect a file and when the
//              the tempfile was nolonger needed it  LFI attempted to remove
//              it and was unable to do so.
//
// *Action:     Check the permissions and where the temp files are being
//              created.
//
00136, 00000, "Unable to change type of open file."
// *Cause:      The function lfichty() was called on an opened file.
//
// *Action:     This is a bug in the client code.  lfichty() cannot be
//              used in this case.
//
00137, 00000, "Unable to perform %s on a file object that is %s."
// *Cause:      Unable to perform an LFI operation on a file object for
//              the given reason.
//
// *Action:     Take the appropriate corrective measure.  For example
//              if a file is supposed to be opened before the
//              operation can be performed, client code will need to
//              open the file first.
//
00138, 00000, "Unable to perform %s on a name object that is %s."
// *Cause:      Unable to perform an LFI operation on a name object for
//              the given reason.
//
// *Action:     Take the appropriate corrective measure.
//
00139, 00000, "Option %s cannot be used with option %s in calling %s."
// *Cause:      First option cannot be used with second option in such
//              a function call.
//
// *Action:     Re-examine code to determine which option is needed.
//
00140, 00000, "Invalid option %s were specified on input-output file."
// *Cause:      The file was opened as input-output and one of the
//              mode options (LFIOPTY_DELETE or non-LFIOPTY_RANDOM)
//              was specified.
//
// *Action:     Check to see how you intend to open this file and make the
//              necessary changes.
//
00141, 00000, "Unable to abort file in operation %s."
//
// *Cause:      The abort operation failed.
//
// *Action:     Check the underlying errors for more information.

00142, 00000, "Unable to delete an existing file [%s][%s] not owned by Oracle."
//
// *Cause:      The file was not created by Oracle.
//
// *Action:     Change owner of file to Oracle or give Oracle access
//              privileges to delete it.
//
00143, 0000, "Unable to delete non-existent file %s."
//
// *Cause:      The file to be deleted does not exist.
//
// *Action:     Check the underlying errors for more information.
//
00144, 00000, "File [%s][%s] does not exist"
// *Cause:      The file does not exist.
//
// *Action:     Check to make sure the file exists and retry the operation.
//
00145, 00000, "User buffer too short."
//
// *Cause:      The buffer that was passed is not large enough.
//
// *Action:     Allocate a larger buffer and retry the operation.
//
00146, 00000, "copy does not expect the file %s.%s to exist"
// *Cause:      We are expecting the destination file not to exist and it does.
//
// *Action:     Find out why the file does exist.
//
00147, 00000, "File %s.%s does not exist"
// *Cause:      The file does not exist.
//
// *Action:     Check to make sure the file exists and retry the operation.
//
00148, 00000, "%s can be called only on files opened in byte mode"
// *Cause:      A routine that should be used only for files in byte
//              mode was called for a file that was opened in record
//              mode
//
// *Action:     In order to use this function, the file should be opened in
//              byte mode.
//
00149, 00000, "Error on destroying hash table in function %s"
// *Cause:      We were expecting the cache path object and it does not.
//
// *Action:     In order to use this function, the path object should be
//              cache path object.
//
00150, 00000, "Error on creating hash table in function %s"
// *Cause:      routine failed to create path object hash table
//
// *Action:     make sure that startsize <= LHTQMAXSLOTS
//
00151, 00000, "Error on inserting into hash table in function %s"
// *Cause:      routine failed to insert into hash table
//
// *Action:     make sure there is enough memory for allocation and
//              that the hash table exists.
//
00152, 00000, "Read operation (byte mode) failed."
// *Cause:      Byte mode read operation failed.  Probably due to incorrect
//              parameters or flags, or trying to read beyond end of file.
//
// *Action:     Check syntax of the read command and size of file.
//
/
/
/ 1000-1499 Reserved for LFI Buffer Manager errors
/
/
01000, 00000, "Unable to write line to file."
// *Cause:      The file being written to may no longer be open or we may have
//              reached the end of the file.
//
// *Action:     Examine underlying errors for more information.
//
01001, 00000, "Unable to write %s bytes to file."
// *Cause:      The file being written to may no longer be open or we may have
//              reached the end of the file.
//
// *Action:     Examine underlying errors for more information.
//
01002, 00000, "Unable to read line from file."
// *Cause:      The file being read from may no longer be open.
//
// *Action:     Examine underlying errors for more information.
//
01003, 00000, "Unable to read %s bytes from file."
// *Cause:      The file being read from may no longer be open.
//
// *Action:     See the accompanying error messages for more information.
//
01004, 00000, "Unable to empty buffer."
// *Cause:      The buffer manager is probably unable to write to the
//              underlying file.
//
// *Action:     Examine underlying errors for more information.
//
01005, 00000, "Unable to fill buffer."
// *Cause:      The buffer manager is probably unable to read from the
//              underlying file.
//
// *Action:     See the accompanying error messages for more information.
//
01006, 00000, "File ends in partial character in %s."
// *Cause:      A line ends in a partial character.
//
// *Action:     Examine underlying errors for more information.
//
01007, 00000, "Line is too long; encountered in function %s."
// *Cause:      The length of the line exceeds the maximum length.
//
// *Action:     Examine underlying errors for more information.
//
/
/ 1500-1599 Reserved for LFI OSD errors
/
/
01500, 00000, "Error condition on call to OSD function %s."
// *Cause:      An error condition arises in calling an OSD function.
//              This message occurs if calls to malloc or free
//              functions failed.
//
// *Action:     Contact Oracle Worldwide Support.
//
01501, 00000, "tmpnam() fails to generate temporary file name."
// *Cause:      Operating system was unable to create temporary file name.
//
// *Action:     Contact the development organization.
//
01502, 00000, "Base filename does not exist."
// *Cause:      The filename that was parsed had no base file.  It was either
//              all path or extension.
//
// *Action:     Check the filename being passed in to make sure it is correct.
//
01503, 00000, "Max filename size exceeded generating filename."
// *Cause:      While building a filename we exceeded the buffer allocated
//              to hold the new filename.
//
// *Action:     Contact the development organization.
//
01504, 00000, "fseek() failed(OSD return value = %s) in %s."
// *Cause:      The function fseek() returned an error condition.
//
// *Action:     Contact Oracle Worldwide Support.
//
01505, 00000, "fclose() failed(OSD return value = %s) in %s."
// *Cause:      The function fclose() returned an error condition.
//
// *Action:     Contact Oracle Worldwide Support.
//
01506, 00000, "fflush() failed(OSD return value = %s)."
// *Cause:      The function fflush() returned an error condition.
//
// *Action:     Contact the development organization.
//
01507, 00000, "fwrite() failed(OSD return value = %s) in %s."
// *Cause:      File pointer may be null or may not be opened for write.
//
// *Action:     Contact the development organization.
//
01508, 00000, "access() failed."
// *Cause:      Call to access() failed.
//
// *Action:     Contact the development organization.
//
01509, 00000, "fopen() failed(OSD return value = %s)."
// *Cause:      Call to fopen() failed.
//
// *Action:     Contact Oracle Worldwide Support.
//
01510, 00000, "fread() failed(OSD return value = %s) in %s."
// *Cause:      Call to fread() failed.
//
// *Action:     Contact Oracle Worldwide Support.
//
01511, 00000, "unlink() failed(OSD errno = %s) in %s."
// *Cause:      Call to unlink() failed.

//
// *Action:     Contact the development organization.
//
01512, 00000, "stat() failed"
// *Cause:      Call to stat() failed.
//
// *Action:     Contact Oracle Worldwide Support.
//
01514, 00000, "ftell() failed in %s"
// *Cause:      The ftell() function returned an error.
//
// *Action:     Contact Oracle Worldwide Support.
//
01515, 00000, "truncate() failed."
// *Cause:      The function truncate() returned an error condition.
//
// *Action:     Contact the development organization.
//

 

01516, 00000, "read() failed (OSD return value = %s) in %s."
// *Cause:      Call to read() failed.
//
// *Action:     Contact the development organization.
//
01517, 00000, "open() failed(OSD return value = %s)."
// *Cause:      Call to open() failed.
//
// *Action:     Contact the development organization.
//
01518, 00000, "write() failed(OSD return value = %s) in %s."
// *Cause:      Call to write() failed.
//
// *Action:     Contact the development organization.
//
01519, 00000, "llseek() failed(OSD return value = %s) in %s."
// *Cause:      The  llseek() function returned an error.
//

 

// *Action:     Contact Oracle Worldwide Support.
//
01520, 00000, "close() failed(OSD return value = %s) in %s."
// *Cause:      The function close() returned an error condition.
//
// *Action:     Contact the development organization.
//
01521, 00000, "fsync() failed(OSD return value = %s) in %s."
// *Cause:      The function fsync() returned an error condition.
//
// *Action:     Contact the development organization.
//
01522, 00000, "opendir() failed."
// *Cause:      The function opendir() returned an error condition.
//
// *Action:     Contact the development organization.
//
01523, 00000, "rename() failed."

// *Cause:      The function rename() returned an error condition.
//
// *Action:     Contact the development organization.
//
01524, 00000, "fdopen() failed(OSD return value = %s)."
// *Cause:      Call to fdopen() failed.
//
// *Action:     Contact the development organization.
//
01525, 00000, "setvbuf() failed."
// *Cause:      The function setvbuf() returned an error condition.
//
// *Action:     Contact the development organization.
//
/
/
/ LFI Internal errors
/
/
// 000001,      "Extension not in list"
// *Cause:      When calling lfiext, an extension is not found in list
//
// *Action:     Contact the development organization.
//
// 000002,      "lfipmkp's pop's tail is NULL"
// *Cause:      An internal error has occurred that cause pop's tail
//              to be NULL.
//
// *Action:     Contact the development organization.
//
// 000003,      "Unexpected switch case in %s"
// *Cause:      An unexpected switch to default has occurred.
//
// *Action:     Contact the development organization.
//
// 000004,      "sltbev() call failed"

// *Cause:      A call to sltbev() had failed.
//
// *Action:     Contact the development organization.
//
// 000005,      "Invalid parameter in internal function %s"
// *Cause:      Invalid parameter has been passed into an internal
//              function.
//
// *Action:     Contact the development organization.
// 00006,       "Invalid Standard File ID Descriptor"
// *Cause:      The function lfiostd() was called with an invalid File ID
//              Descriptor.  The valid File ID Descriptors are LFISTDIN_INDEX,
//              LFISTDOUT_INDEX, and LFISTDERR_INDEX.
//
// *Action:     Check the call to lfiostd() to make sure it is
//              correct.
//
//

// 00007,       "List element not found"
// *Cause:      A call to lfillmem() had failed.
//
// *Action:     Contact development service
//
// 00008,       "lficstd failed when calling lfibfr()"
// *Cause:      A call to lficstd() had failed.
//
// *Action:     Contact development service
01522, 00000, "opendir() failed."
// *Cause:      The function opendir() returned an error condition.
//
// *Action:     Contact the development organization.
//
01523, 00000, "rename() failed."
// *Cause:      The function rename() returned an error condition.
//
// *Action:     Contact the development organization.
//
01524, 00000, "fdopen() failed(OSD return value = %s)."
// *Cause:      Call to fdopen() failed.
//
// *Action:     Contact the development organization.
//
01525, 00000, "setvbuf() failed."
// *Cause:      The function setvbuf() returned an error condition.
//
// *Action:     Contact the development organization.
//
/
/
/ LFI Internal errors
/
/
// 000001,      "Extension not in list"
// *Cause:      When calling lfiext, an extension is not found in list
//
// *Action:     Contact the development organization.
//
// 000002,      "lfipmkp's pop's tail is NULL"
// *Cause:      An internal error has occurred that cause pop's tail
//              to be NULL.
//
// *Action:     Contact the development organization.
01516, 00000, "read() failed (OSD return value = %s) in %s."
01517, 00000, "open() failed(OSD return value = %s)."
01518, 00000, "write() failed(OSD return value = %s) in %s."
01519, 00000, "llseek() failed(OSD return value = %s) in %s."
// *Cause:      The  llseek() function returned an error.
//
// *Action:     Contact Oracle Worldwide Support.
//
01520, 00000, "close() failed(OSD return value = %s) in %s."
01521, 00000, "fsync() failed(OSD return value = %s) in %s."
// *Action:     Contact the development organization.
//
//
// *Action:     Contact the development organization.
//
01508, 00000, "access() failed."
// *Cause:      Call to access() failed.
//
// *Action:     Contact the development organization.
//
01509, 00000, "fopen() failed(OSD return value = %s)."
// *Cause:      Call to fopen() failed.
//
// *Action:     Contact Oracle Worldwide Support.
//
01510, 00000, "fread() failed(OSD return value = %s) in %s."
// *Cause:      Call to fread() failed.
//
// *Action:     Contact Oracle Worldwide Support.
//
01511, 00000, "unlink() failed(OSD errno = %s) in %s."
// *Cause:      Call to unlink() failed.
//
// *Action:     Contact the development organization.
//
01512, 00000, "stat() failed"
// *Cause:      Call to stat() failed.
//
// *Action:     Contact Oracle Worldwide Support.
//
01514, 00000, "ftell() failed in %s"
// *Cause:      The ftell() function returned an error.
//
// *Action:     Contact Oracle Worldwide Support.
//
01515, 00000, "truncate() failed."
// *Cause:      The function truncate() returned an error condition.
01501, 00000, "tmpnam() fails to generate temporary file name."
// *Cause:      Operating system was unable to create temporary file name.
//
// *Action:     Contact the development organization.
01502, 00000, "Base filename does not exist."
//              all path or extension.
// *Action:     Check the filename being passed in to make sure it is correct.
//
01503, 00000, "Max filename size exceeded generating filename."
// *Cause:      While building a filename we exceeded the buffer allocated
// *Action:     Contact the development organization.
01504, 00000, "fseek() failed(OSD return value = %s) in %s."
// *Action:     Contact Oracle Worldwide Support.
01505, 00000, "fclose() failed(OSD return value = %s) in %s."
01506, 00000, "fflush() failed(OSD return value = %s)."
// *Action:     Contact the development organization.
01507, 00000, "fwrite() failed(OSD return value = %s) in %s."
//
01004, 00000, "Unable to empty buffer."
// *Cause:      The buffer manager is probably unable to write to the
//              underlying file.
//
// *Action:     Examine underlying errors for more information.
//
01005, 00000, "Unable to fill buffer."
// *Cause:      The buffer manager is probably unable to read from the
//              underlying file.
//
// *Action:     See the accompanying error messages for more information.
//
01006, 00000, "File ends in partial character in %s."
// *Cause:      A line ends in a partial character.
//
// *Action:     Examine underlying errors for more information.
//
01007, 00000, "Line is too long; encountered in function %s."
// *Cause:      The length of the line exceeds the maximum length.
//
// *Action:     Examine underlying errors for more information.
//
/
/ 1500-1599 Reserved for LFI OSD errors
/
/
01500, 00000, "Error condition on call to OSD function %s."
// *Cause:      An error condition arises in calling an OSD function.
//              This message occurs if calls to malloc or free
//              functions failed.
//
// *Action:     Contact Oracle Worldwide Support.
//
01501, 00000, "tmpnam() fails to generate temporary file name."
//              that the hash table exists.
//              parameters or flags, or trying to read beyond end of file.
// *Action:     Check syntax of the read command and size of file.
//              reached the end of the file.
// *Action:     Examine underlying errors for more information.
// *Cause:      The file being written to may no longer be open or we may have
// *Action:     Examine underlying errors for more information.
01002, 00000, "Unable to read line from file."
// *Cause:      The file being read from may no longer be open.
01003, 00000, "Unable to read %s bytes from file."
// *Action:     See the accompanying error messages for more information.
//
00146, 00000, "copy does not expect the file %s.%s to exist"
// *Cause:      We are expecting the destination file not to exist and it does.
//
// *Action:     Find out why the file does exist.
//
00147, 00000, "File %s.%s does not exist"
// *Cause:      The file does not exist.
//
// *Action:     Check to make sure the file exists and retry the operation.
//
00148, 00000, "%s can be called only on files opened in byte mode"
// *Cause:      A routine that should be used only for files in byte
//              mode was called for a file that was opened in record
//              mode
//
// *Action:     In order to use this function, the file should be opened in
//              byte mode.
//
00149, 00000, "Error on destroying hash table in function %s"
// *Cause:      We were expecting the cache path object and it does not.
//
// *Action:     In order to use this function, the path object should be
//              cache path object.
//
00150, 00000, "Error on creating hash table in function %s"
// *Cause:      routine failed to create path object hash table
//
// *Action:     make sure that startsize <= LHTQMAXSLOTS
//
00151, 00000, "Error on inserting into hash table in function %s"
// *Cause:      routine failed to insert into hash table
//
// *Action:     make sure there is enough memory for allocation and
//              that the hash table exists.
//              was specified.
00141, 00000, "Unable to abort file in operation %s."
// *Action:     Change owner of file to Oracle or give Oracle access
00143, 0000, "Unable to delete non-existent file %s."
00144, 00000, "File [%s][%s] does not exist"
00145, 00000, "User buffer too short."
//
// *Action:     Check the permissions and where the temp files are being
//              created.
//
00136, 00000, "Unable to change type of open file."
// *Cause:      The function lfichty() was called on an opened file.
//
// *Action:     This is a bug in the client code.  lfichty() cannot be
//              used in this case.
//
00137, 00000, "Unable to perform %s on a file object that is %s."
// *Cause:      Unable to perform an LFI operation on a file object for
//              the given reason.
//
// *Action:     Take the appropriate corrective measure.  For example
//              if a file is supposed to be opened before the
//              operation can be performed, client code will need to
//              open the file first.
//
00138, 00000, "Unable to perform %s on a name object that is %s."
// *Cause:      Unable to perform an LFI operation on a name object for
//              the given reason.
//
// *Action:     Take the appropriate corrective measure.
//
00139, 00000, "Option %s cannot be used with option %s in calling %s."
// *Cause:      First option cannot be used with second option in such
//              a function call.
//
// *Action:     Re-examine code to determine which option is needed.
//
00140, 00000, "Invalid option %s were specified on input-output file."
// *Cause:      The file was opened as input-output and one of the
//              mode options (LFIOPTY_DELETE or non-LFIOPTY_RANDOM)
//              was specified.
// *Cause:      The file object was created without an open type (that is,
// *Action:     Decide how the file should be accessed and specify one of
00132, 00000, "Record length %s is greater than max length of %s."
//              the max supported by this platform.
//
00133, 00000, "Trying to create file %s that already exists."
// *Cause:      The file object was initialized with LFILOPTY_OUTPUT and
//              you intend to overwrite the file if it exists that specify the
//              replace option LFILOPTY_REPLACE when initializing the file
00134, 00000, "Unable to protect a file for an append operation."
//              specified for the file.  This is currently not allowed because
//              it would require copying the entire file at open time.
//              so then think about making a copy of it before appending.
00135, 00000, "Unable to remove temporary file."
// *Cause:      A temporary file was created to protect a file and when the
//
00127, 00000, "No Record Format was specified, default is variable."
// *Cause:      Neither LFILRF_FIXED (fixed) or LFILRF_VAR (variable) were
//              specified for record format.  One of the two must be specified
//              for each file.
//
// *Action:     The default is LFILRF_VAR, but this should be explicitly set
//              during file object creation.
//
00128, 00000, "Carriage Control is only valid for Standard file objects."
// *Cause:      The Carriage Control option is only valid for the
//              standard file objects (LFISTDIN, LFISTDOUT, LFISTDERR).
//              You may not specify this option for any other type of file.
//
// *Action:     Choose between LFILRF_FIXED and LFILRF_VAR for the record
//              format.
//
00129, 00000, "Invalid option %s were specified on an input only file."
// *Cause:      The file was opened as input only but the output mode
//              option LFILRF_WR_ASIS or delete option LFLOPTY_DELETE
//              was specified.
//
// *Action:     Check to see how you intend to open this file and make the
//              necessary changes.
//
00130, 00000, "Input option specified on output only file."
// *Cause:      The file was opened as output only but one of the input
//              mode options (LFILRF_READ_NL or LFILRF_FORCE_NL) or was
//              specified.
//
// *Action:     Check to see how you intend to open this file and make the
//              necessary changes.
//
00131, 00000, "No open type specified."
// *Cause:      The file object was created without an open type (that is,
// *Cause:      Both the LFILFA_SEQ (sequential) and LFILFA_RANDOM (random)
//              flags were specified during the file object creation.  This
//              random you can still access sequentially by just not using
00124, 00000, "No access mode was specified, default is sequential."
// *Cause:      Neither LFILFA_SEQ (sequential) or LFILFA_RANDOM (random) were
// *Action:     The default is sequential but this should be explicitly set.
//
//              not organized into fixed-length records.  Random access
//              access to the file.  If both conditions are true then
//              to close and rescan the file although this is not the
//              specified during file object creation. Only one of the two is
// *Action:     Determine how the file is organized and choose the option
00119, 00000, "Unable to Abort an Unprotected file."
// *Cause:      The Abort function lfiabt() was called on a file that
//              was not opened as a protected file.  As such the abort
//              operation is not valid.
//
// *Action:     Check to see if you intended to open the file as a protected
//              file.
//
00120, 00000, "Unable to parse root filename %s."
// *Cause:      The root filename that was given to lfimknam() is not in a
//              format that this platform understands.
//
// *Action:     Check the format of the filename and retry the operation.
//
00121, 00000, "Only one of REPLACE, or PROT allowed for opty."
// *Cause:      Two or more of the following open type options were
//              specified for the lfilini() function: LFILOPTY_REPLACE,
//              or LFILOPTY_PROT.
//
// *Action:     Remove one or more the of options such that you are only
//              passing in one of the three.
//
00122, 00000, "Can only delete a file if we create it."
// *Cause:      The delete file flag was specified for a file that was not
//              created by this file operation.  The ability to delete a
//              file is not portable.  As such the only deletion that
//              is allowed by this package is if we know we want to delete
//              the file when we create it.
//
// *Action:     You can only delete a file that you create.  If you need
//              to delete a file that you do not create then you will have
//              to find another means of doing so.
//
00123, 00000, "Cannot access file Sequentially and Randomly."
// *Cause:      Both the LFILFA_SEQ (sequential) and LFILFA_RANDOM (random)
// *Action:     Check the underlying errors for more information.
// *Action:     See the accompanying error messages for more information.
00116, 00000, "Unable to close file in operation %s."
00117, 00000, "Unable to rename file."
//              protecting a file by operating on a temp file.
//
// *Action:     Check to make sure that the process has the correct
//              operation.
//              no extension then use the extension type LFIEXNONE.
//              should exist.  If so then find out why the file doesn't.
//
00109, 00000, "Unable to open file [%s][%s].  %s."
// *Cause:      Either:
//                the process does not have the proper access rights to open
//                  the file
//                the file is already open
//
// *Action:     Check to make sure the proper access permissions are assigned.
//              If they are and the file still cannot be opened, then
//              contact Oracle Worldwide Support.
//
00110, 00000, "Unable to initialize the Buffer Manager."
// *Cause:      The Buffer Manager initialization routine failed; probably
//              because memory was exhausted.
//
// *Action:     See the accompanying error messages for more information.
//
00111, 00000, "No other flags allowed in fixed length format."
// *Cause:      Other options are specified with the fixed length format.
//
// *Action:     Clear other options from flag.
//
//
// 00112, 00000, "Invalid Standard File ID Descriptor."
// *Cause:      The function lfigfo() was called with an invalid File ID
//              Descriptor.  The valid File ID Descriptors are LFISTDIN,
//              LFISTDOUT, and LFISTDERR.
//
// *Action:     Check the call to lfigfo() to make sure it is correct.
//
00113, 00000, "Unable to initialize the Standard File object %s."
// *Cause:      The call to open the standard file object failed.
//
// *Action:     Check the underlying errors for more information.
// *Action:     Check syntax of the read command and retry the operation.
//                 the directory might not be in the proper format
//              check that the name object was initialized properly.
//              one path.
// *Action:     Make sure that the path object used in lfippth() holds
00107, 00000, "Open does not expect the file [%s][%s] to exist."
// *Action:     Check to make sure that the options that were specified for
00108, 00000, "Open expect the file [%s][%s] to exist."
//              the file to exist and it does not.
//              the file are correct and that you expect that the file
//              should exist.  If so then find out why the file doesn't.
/ 100-999 Reserved for LFI Public interface errors
/
/
00100, 00000, "Unable to perform operation, file not opened in %s."
// *Cause:      The file has not been successfully opened at the time the
//              operation is attempted.
//
// *Action:     Check to make sure that the file exists (for read) or that
//              the program has access to the write a file (for write).
//              It is also possible that the file was just never opened
//
00101, 00000, "Write failed, file cannot be written to."
// *Cause:      The buffer write operation failed.  Possibly due to incorrect
//              parameters being passed in.
//
// *Action: Check the underlying error for more information.
//
00102, 00000, "Unable to seek in sequentially accessed file."
// *Cause:      The file was opened with the flag LFILFA_SEQ for sequential
//              file operations.  Use seek only on files that are
//              opened with the LFILFA_RANDOM flag for random access.
//
// *Action:     Check to see how the file is being opened and accessed and
//              make the two operations consistent (that is, make them both
//              operations either sequential or random).
//
00103, 00000, "Seek operation failed."
// *Cause:      The buffer seek operation failed.  Probably due to incorrect
//              parameters or flags.
//
// *Action:     Check syntax of the seek command and retry the operation.
//
00104, 00000, "Read operation failed."
// *Cause:      The buffer read operation failed.  Probably due to incorrect
//              parameters or flags.
// *Cause:      A function call has failed.  This error is a generic
//              message to show that the exception has occurred in a
//              particular function function name.  This allows the client to
// *Cause:      A call to free some memory in function function name has failed.
//              contact Oracle Worldwide Support immediately.
//
// *Cause:      The function was called with an invalid parameter.
00007, 00000, "NLSRTL's call failed. %s."
//              appropriate group immediately if we parameters are valid.
/
/ LFI Error Messages
/
/
// 00000, 00000, "Normal, successful completion."
// *Cause:      Normal exit
//
// *Action:     None
//
// 00001, 00000, "File IO Internal Error #%ld"
// *Cause:      An internal error occurred.
//
// *Action:     Contact the development organization.
//
/
/
/ Generic errors
/
/
00002, 00000, "Out of memory. %s"
// *Cause:      The File IO package failed in trying to dynamically allocate
//              memory. function name  is used for additional comments to
//              indicate where, when and why the error occured.
//
// *Action:     Perform whatever actions necessary to make more memory available
//              to the executing program.
//
00003, 00000, "Internal exception code. icode = [%s], [%s]."
// *Cause:      Unknown - indicated by parameters. The first '%s' gives
//              the internal exception code; the second is for any other
//              additional comments.
//
// *Action:     Report to the appropriate development group
//
00004, 00000, "Call to %s failed."
/ $Header: lfius.msg 11-jan-2008.03:14:17 madhanap Exp $
/
/ Copyright (c) 1993, 2003, Oracle.  All rights reserved.
/     lfius.msg - LFI US language error message file
/   DESCRIPTION
/     Error message file for LFI package
// 00000, 00000, "Normal, successful completion."
// *Cause:      Normal exit
//
00002, 00000, "Out of memory. %s"
//              memory. function name  is used for additional comments to
//

 

 

 

 

 

 

 

 

// *Action:     Perform whatever actions necessary to make more memory available
//              to the executing program.
//
00003, 00000, "Internal exception code. icode = [%s], [%s]."
// *Cause:      Unknown - indicated by parameters. The first '%s' gives
//              the internal exception code; the second is for any other
//              additional comments.
//
// *Action:     Report to the appropriate development group
//
00004, 00000, "Call to %s failed."
// *Cause:      A function call has failed.  This error is a generic
//              message to show that the exception has occurred in a
//              particular function function name.  This allows the client to
//              know the trace runtime calling sequence by examining the
//              exception stack.
//
// *Action:     See the accompanying error messages for more information.

 

 

 

 

 

 

 

 

//
00005, 00000, "Free some memory failed in %s."
// *Cause:      A call to free some memory in function function name has failed.
//
// *Action:     See the accompanying error messages for more information and
//              contact Oracle Worldwide Support immediately.
//
00006, 00000, "Invalid parameter to function %s."
// *Cause:      The function was called with an invalid parameter.
//
// *Action:     Check the function call to make sure that the correct
//              parameters are being passed.
//
00007, 00000, "NLSRTL's call failed. %s."
// *Cause:      LX calls return failure
//
// *Action:     Check if our parameters are correct.  Contact the
//              appropriate group immediately if we parameters are valid.

 

 

 

 

 

 

 

 

//
00008, 00000, "SLTS's initializing/terminating mutex failed for %s."
// *Cause:      SLTS's call return failure in function '%s'.
//
// *Action:     Contact the appropriate development group.
//
//
/
/ 100-999 Reserved for LFI Public interface errors
/
/
00100, 00000, "Unable to perform operation, file not opened in %s."
// *Cause:      The file has not been successfully opened at the time the
//              operation is attempted.
//
// *Action:     Check to make sure that the file exists (for read) or that
//              the program has access to the write a file (for write).
//              It is also possible that the file was just never opened

 

 

 

 

 

 

 

 

//
00101, 00000, "Write failed, file cannot be written to."
// *Cause:      The buffer write operation failed.  Possibly due to incorrect
//              parameters being passed in.
//
// *Action: Check the underlying error for more information.
//
00102, 00000, "Unable to seek in sequentially accessed file."
// *Cause:      The file was opened with the flag LFILFA_SEQ for sequential
//              file operations.  Use seek only on files that are
//              opened with the LFILFA_RANDOM flag for random access.
//
// *Action:     Check to see how the file is being opened and accessed and
//              make the two operations consistent (that is, make them both
//              operations either sequential or random).
//
00103, 00000, "Seek operation failed."
// *Cause:      The buffer seek operation failed.  Probably due to incorrect

 

 

 

 

 

 

 

 

//              parameters or flags.
//
// *Action:     Check syntax of the seek command and retry the operation.
//
00104, 00000, "Read operation failed."
// *Cause:      The buffer read operation failed.  Probably due to incorrect
//              parameters or flags.
//
// *Action:     Check syntax of the read command and retry the operation.
//
00105, 00000, "Unable to add path."
// *Cause:      One of the following might have caused the error:
//                 the current path might not be in the proper format
//                 the directory might not be in the proper format
//                 the name object might not have been initialized properly
//
// *Action:     Check the format of the current path and the new directory;
//              check that the name object was initialized properly.

 

 

 

 

 

 

 

 

//
00106, 00000, "Path object holds more than one path."
// *Cause:      The path object passed to lfippth() holds more than
//              one path.
//
// *Action:     Make sure that the path object used in lfippth() holds
//              only one path.
//
00107, 00000, "Open does not expect the file [%s][%s] to exist."
// *Cause:      The flags specified for the open indicate that the file does
//              not exist. However, the file does exist.
//
// *Action:     Check to make sure that the options that were specified for
//              the file are correct and that you do not expect that the file
//              should exist.  If so then find out why the file does exist.
//
00108, 00000, "Open expect the file [%s][%s] to exist."
// *Cause:      The flags specified for the open indicate that the file

//              the file to exist and it does not.
//
// *Action:     Check to make sure that the options that were specified for
//              the file are correct and that you expect that the file
//              should exist.  If so then find out why the file doesn't.
//
00109, 00000, "Unable to open file [%s][%s].  %s."
// *Cause:      Either:
//                the process does not have the proper access rights to open
//                  the file
//                the file is already open
//
// *Action:     Check to make sure the proper access permissions are assigned.
//              If they are and the file still cannot be opened, then
//              contact Oracle Worldwide Support.
//
00110, 00000, "Unable to initialize the Buffer Manager."
// *Cause:      The Buffer Manager initialization routine failed; probably

//              because memory was exhausted.
//
// *Action:     See the accompanying error messages for more information.
//
00111, 00000, "No other flags allowed in fixed length format."
// *Cause:      Other options are specified with the fixed length format.
//
// *Action:     Clear other options from flag.
//
//
// 00112, 00000, "Invalid Standard File ID Descriptor."
// *Cause:      The function lfigfo() was called with an invalid File ID
//              Descriptor.  The valid File ID Descriptors are LFISTDIN,
//              LFISTDOUT, and LFISTDERR.
//
// *Action:     Check the call to lfigfo() to make sure it is correct.
//
00113, 00000, "Unable to initialize the Standard File object %s."

// *Cause:      The call to open the standard file object failed.
//
// *Action:     Check the underlying errors for more information.
//
00114, 00000, "Append is not allowed with %s."
// *Cause:      Attempting to append using certain options.
//
// *Action:     Check the flag options to verify its usage.
//
//
00115, 00000, "Buffer free failed."
// *Cause:      Probably do to the buffer flush failing.
//
// *Action:     See the accompanying error messages for more information.
//
00116, 00000, "Unable to close file in operation %s."
// *Cause:      The file close operation failed.
//

// *Action:     See the accompanying error messages for more information.
//
00117, 00000, "Unable to rename file."
// *Cause:      The rename operation failed.  Rename is called when we are
//              protecting a file by operating on a temp file.
//
// *Action:     Check to make sure that the process has the correct
//              access rights to perform a rename.
//
00118, 00000, "Unable to change type to Unknown."
// *Cause:      The function lfichty() was called to change the file
//              extension to LFIEXUNK (Unknown).  This is not a valid
//              operation.
//
// *Action:     Check why you are doing this.  If the extension is already
//              unknown then you do not need to do this.  If you just want
//              no extension then use the extension type LFIEXNONE.
//

00119, 00000, "Unable to Abort an Unprotected file."
// *Cause:      The Abort function lfiabt() was called on a file that
//              was not opened as a protected file.  As such the abort
//              operation is not valid.
//
// *Action:     Check to see if you intended to open the file as a protected
//              file.
//
00120, 00000, "Unable to parse root filename %s."
// *Cause:      The root filename that was given to lfimknam() is not in a
//              format that this platform understands.
//
// *Action:     Check the format of the filename and retry the operation.
//
00121, 00000, "Only one of REPLACE, or PROT allowed for opty."
// *Cause:      Two or more of the following open type options were
//              specified for the lfilini() function: LFILOPTY_REPLACE,
//              or LFILOPTY_PROT.

//
// *Action:     Remove one or more the of options such that you are only
//              passing in one of the three.
//
00122, 00000, "Can only delete a file if we create it."
// *Cause:      The delete file flag was specified for a file that was not
//              created by this file operation.  The ability to delete a
//              file is not portable.  As such the only deletion that
//              is allowed by this package is if we know we want to delete
//              the file when we create it.
//
// *Action:     You can only delete a file that you create.  If you need
//              to delete a file that you do not create then you will have
//              to find another means of doing so.
//
00123, 00000, "Cannot access file Sequentially and Randomly."
// *Cause:      Both the LFILFA_SEQ (sequential) and LFILFA_RANDOM (random)
//              flags were specified during the file object creation.  This

//              is not allowed.  Only one of the two may be specified.
//
// *Action:     Choose how you wish to access the file.  If you choose
//              random you can still access sequentially by just not using
//              the repositioning functions.
//
00124, 00000, "No access mode was specified, default is sequential."
// *Cause:      Neither LFILFA_SEQ (sequential) or LFILFA_RANDOM (random) were
//              specified during file object creation.
//
// *Action:     The default is sequential but this should be explicitly set.
//
00125, 00000, "Random access only allowed on fixed length record files."
// *Cause:      The LFILFA_RANDOM flag was specified on a file that was
//              not organized into fixed-length records.  Random access
//              is only allowed on fixed-length record files.
//
// *Action:     Determine if the organization of your data needs to be in

//              variable-length records and if you need to have random
//              access to the file.  If both conditions are true then
//              you might need to buffer the entire file or enough of it
//              to remove your need for random access.  Another option is
//              to close and rescan the file although this is not the
//              optimal solution.
//
00126, 00000, "Record format can only be one of Fixed or Variable."
// *Cause:      Both LFILRF_FIXED (fixed) and LFILRF_VAR (variable) were
//              specified during file object creation. Only one of the two is
//              allowed for a given file.
//
// *Action:     Determine how the file is organized and choose the option
//              that matches.
//
00127, 00000, "No Record Format was specified, default is variable."
// *Cause:      Neither LFILRF_FIXED (fixed) or LFILRF_VAR (variable) were
//              specified for record format.  One of the two must be specified
//              for each file.
//
// *Action:     The default is LFILRF_VAR, but this should be explicitly set
//              during file object creation.
//
00128, 00000, "Carriage Control is only valid for Standard file objects."
// *Cause:      The Carriage Control option is only valid for the
//              standard file objects (LFISTDIN, LFISTDOUT, LFISTDERR).
//              You may not specify this option for any other type of file.
//
// *Action:     Choose between LFILRF_FIXED and LFILRF_VAR for the record
//              format.
//
00129, 00000, "Invalid option %s were specified on an input only file."
// *Cause:      The file was opened as input only but the output mode
//              option LFILRF_WR_ASIS or delete option LFLOPTY_DELETE
//              was specified.
//
// *Action:     Check to see how you intend to open this file and make the
//              necessary changes.
//
00130, 00000, "Input option specified on output only file."
// *Cause:      The file was opened as output only but one of the input
//              mode options (LFILRF_READ_NL or LFILRF_FORCE_NL) or was
//              specified.
//
// *Action:     Check to see how you intend to open this file and make the
//              necessary changes.
//
00131, 00000, "No open type specified."
// *Cause:      The file object was created without an open type (that is,
//              LFILOPTY_INPUT, LFILOPTY_OUTPUT, etc.).
//
// *Action:     Decide how the file should be accessed and specify one of
//              the open types.
//

00132, 00000, "Record length %s is greater than max length of %s."
// *Cause:      The record length specified for the file is greater than
//              the max supported by this platform.
//
// *Action:     Decrease the record length.
//
00133, 00000, "Trying to create file %s that already exists."
// *Cause:      The file object was initialized with LFILOPTY_OUTPUT and
//              without LFILOPTY_REPLACE and yet a file by this name already
//              exists.
//
// *Action:     Check to make sure that you are creating the right file.  If
//              you intend to overwrite the file if it exists that specify the
//              replace option LFILOPTY_REPLACE when initializing the file
//              object.
//
00134, 00000, "Unable to protect a file for an append operation."
// *Cause:      The LFILOPTY_APPEND and LFILOPTY_PROT options were both
//              specified for the file.  This is currently not allowed because
//              it would require copying the entire file at open time.
//
// *Action:     Decide if you really need to protect the file for append.  If
//              so then think about making a copy of it before appending.
//
00135, 00000, "Unable to remove temporary file."
// *Cause:      A temporary file was created to protect a file and when the
//              the tempfile was nolonger needed it  LFI attempted to remove
//              it and was unable to do so.
//
// *Action:     Check the permissions and where the temp files are being
//              created.
//
00136, 00000, "Unable to change type of open file."
// *Cause:      The function lfichty() was called on an opened file.
//
// *Action:     This is a bug in the client code.  lfichty() cannot be

//              used in this case.
//
00137, 00000, "Unable to perform %s on a file object that is %s."
// *Cause:      Unable to perform an LFI operation on a file object for
//              the given reason.
//
// *Action:     Take the appropriate corrective measure.  For example
//              if a file is supposed to be opened before the
//              operation can be performed, client code will need to
//              open the file first.
//
00138, 00000, "Unable to perform %s on a name object that is %s."
// *Cause:      Unable to perform an LFI operation on a name object for
//              the given reason.
//
// *Action:     Take the appropriate corrective measure.
//
00139, 00000, "Option %s cannot be used with option %s in calling %s."
// *Cause:      First option cannot be used with second option in such
//              a function call.
//
// *Action:     Re-examine code to determine which option is needed.
//
00140, 00000, "Invalid option %s were specified on input-output file."
// *Cause:      The file was opened as input-output and one of the
//              mode options (LFIOPTY_DELETE or non-LFIOPTY_RANDOM)
//              was specified.
//
// *Action:     Check to see how you intend to open this file and make the
//              necessary changes.
//
00141, 00000, "Unable to abort file in operation %s."
//
// *Cause:      The abort operation failed.
//
// *Action:     Check the underlying errors for more information.
//
00142, 00000, "Unable to delete an existing file [%s][%s] not owned by Oracle."
//
// *Cause:      The file was not created by Oracle.
//
// *Action:     Change owner of file to Oracle or give Oracle access
//              privileges to delete it.
//
00143, 0000, "Unable to delete non-existent file %s."
//
// *Cause:      The file to be deleted does not exist.
//
// *Action:     Check the underlying errors for more information.
//
00144, 00000, "File [%s][%s] does not exist"
// *Cause:      The file does not exist.
//
// *Action:     Check to make sure the file exists and retry the operation.

//
00145, 00000, "User buffer too short."
//
// *Cause:      The buffer that was passed is not large enough.
//
// *Action:     Allocate a larger buffer and retry the operation.
//
00146, 00000, "copy does not expect the file %s.%s to exist"
// *Cause:      We are expecting the destination file not to exist and it does.
//
// *Action:     Find out why the file does exist.
//
00147, 00000, "File %s.%s does not exist"
// *Cause:      The file does not exist.
//
// *Action:     Check to make sure the file exists and retry the operation.
//
00148, 00000, "%s can be called only on files opened in byte mode"
// *Cause:      A routine that should be used only for files in byte
//              mode was called for a file that was opened in record
//              mode
//
// *Action:     In order to use this function, the file should be opened in
//              byte mode.
//
00149, 00000, "Error on destroying hash table in function %s"
// *Cause:      We were expecting the cache path object and it does not.
//
// *Action:     In order to use this function, the path object should be
//              cache path object.
//
00150, 00000, "Error on creating hash table in function %s"
// *Cause:      routine failed to create path object hash table
//
// *Action:     make sure that startsize <= LHTQMAXSLOTS
//
00151, 00000, "Error on inserting into hash table in function %s"
// *Cause:      routine failed to insert into hash table
//
// *Action:     make sure there is enough memory for allocation and
//              that the hash table exists.
//
00152, 00000, "Read operation (byte mode) failed."
// *Cause:      Byte mode read operation failed.  Probably due to incorrect
//              parameters or flags, or trying to read beyond end of file.
//
// *Action:     Check syntax of the read command and size of file.
//
/
/
/ 1000-1499 Reserved for LFI Buffer Manager errors
/
/
01000, 00000, "Unable to write line to file."

// *Cause:      The file being written to may no longer be open or we may have
//              reached the end of the file.
//
// *Action:     Examine underlying errors for more information.
//
01001, 00000, "Unable to write %s bytes to file."
// *Cause:      The file being written to may no longer be open or we may have
//              reached the end of the file.
//
// *Action:     Examine underlying errors for more information.
//
01002, 00000, "Unable to read line from file."
// *Cause:      The file being read from may no longer be open.
//
// *Action:     Examine underlying errors for more information.
//
01003, 00000, "Unable to read %s bytes from file."
// *Cause:      The file being read from may no longer be open.
//
// *Action:     See the accompanying error messages for more information.
//
01004, 00000, "Unable to empty buffer."
// *Cause:      The buffer manager is probably unable to write to the
//              underlying file.
//
// *Action:     Examine underlying errors for more information.
//
01005, 00000, "Unable to fill buffer."
// *Cause:      The buffer manager is probably unable to read from the
//              underlying file.
//
// *Action:     See the accompanying error messages for more information.
//
01006, 00000, "File ends in partial character in %s."
// *Cause:      A line ends in a partial character.
//
// *Action:     Examine underlying errors for more information.
//
01007, 00000, "Line is too long; encountered in function %s."
// *Cause:      The length of the line exceeds the maximum length.
//
// *Action:     Examine underlying errors for more information.
//
/
/ 1500-1599 Reserved for LFI OSD errors
/
/
01500, 00000, "Error condition on call to OSD function %s."
// *Cause:      An error condition arises in calling an OSD function.
//              This message occurs if calls to malloc or free
//              functions failed.
//
// *Action:     Contact Oracle Worldwide Support.
//

01501, 00000, "tmpnam() fails to generate temporary file name."
// *Cause:      Operating system was unable to create temporary file name.
//
// *Action:     Contact the development organization.
//
01502, 00000, "Base filename does not exist."
// *Cause:      The filename that was parsed had no base file.  It was either
//              all path or extension.
//
// *Action:     Check the filename being passed in to make sure it is correct.
//
01503, 00000, "Max filename size exceeded generating filename."
// *Cause:      While building a filename we exceeded the buffer allocated
//              to hold the new filename.
//
// *Action:     Contact the development organization.
//
01504, 00000, "fseek() failed(OSD return value = %s) in %s."

// *Cause:      The function fseek() returned an error condition.
//
// *Action:     Contact Oracle Worldwide Support.
//
01505, 00000, "fclose() failed(OSD return value = %s) in %s."
// *Cause:      The function fclose() returned an error condition.
//
// *Action:     Contact Oracle Worldwide Support.
//
01506, 00000, "fflush() failed(OSD return value = %s)."
// *Cause:      The function fflush() returned an error condition.
//
// *Action:     Contact the development organization.
//
01507, 00000, "fwrite() failed(OSD return value = %s) in %s."
// *Cause:      File pointer may be null or may not be opened for write.
//
// *Action:     Contact the development organization.

//
01508, 00000, "access() failed."
// *Cause:      Call to access() failed.
//
// *Action:     Contact the development organization.
//
01509, 00000, "fopen() failed(OSD return value = %s)."
// *Cause:      Call to fopen() failed.
//
// *Action:     Contact Oracle Worldwide Support.
//
01510, 00000, "fread() failed(OSD return value = %s) in %s."
// *Cause:      Call to fread() failed.
//
// *Action:     Contact Oracle Worldwide Support.
//
01511, 00000, "unlink() failed(OSD errno = %s) in %s."
// *Cause:      Call to unlink() failed.

//
// *Action:     Contact the development organization.
//
01512, 00000, "stat() failed"
// *Cause:      Call to stat() failed.
//
// *Action:     Contact Oracle Worldwide Support.
//
01514, 00000, "ftell() failed in %s"
// *Cause:      The ftell() function returned an error.
//
// *Action:     Contact Oracle Worldwide Support.
//
01515, 00000, "truncate() failed."
// *Cause:      The function truncate() returned an error condition.
//
// *Action:     Contact the development organization.
//
01516, 00000, "read() failed (OSD return value = %s) in %s."
// *Cause:      Call to read() failed.
//
// *Action:     Contact the development organization.
//
01517, 00000, "open() failed(OSD return value = %s)."
// *Cause:      Call to open() failed.
//
// *Action:     Contact the development organization.
//
01518, 00000, "write() failed(OSD return value = %s) in %s."
// *Cause:      Call to write() failed.
//
// *Action:     Contact the development organization.
//
01519, 00000, "llseek() failed(OSD return value = %s) in %s."
// *Cause:      The  llseek() function returned an error.

// *Action:     Contact Oracle Worldwide Support.
//
01520, 00000, "close() failed(OSD return value = %s) in %s."
// *Cause:      The function close() returned an error condition.
//
// *Action:     Contact the development organization.
//
01521, 00000, "fsync() failed(OSD return value = %s) in %s."
// *Cause:      The function fsync() returned an error condition.
//
// *Action:     Contact the development organization.
//
01522, 00000, "opendir() failed."
// *Cause:      The function opendir() returned an error condition.
//
// *Action:     Contact the development organization.
//
01523, 00000, "rename() failed."
// *Cause:      The function rename() returned an error condition.
//
// *Action:     Contact the development organization.
//
01524, 00000, "fdopen() failed(OSD return value = %s)."
// *Cause:      Call to fdopen() failed.
//
// *Action:     Contact the development organization.
//
01525, 00000, "setvbuf() failed."
// *Cause:      The function setvbuf() returned an error condition.
//
// *Action:     Contact the development organization.
//
/
/
/ LFI Internal errors
/
/
// 000001,      "Extension not in list"
// *Cause:      When calling lfiext, an extension is not found in list
//
// *Action:     Contact the development organization.
//
// 000002,      "lfipmkp's pop's tail is NULL"
// *Cause:      An internal error has occurred that cause pop's tail
//              to be NULL.
//
// *Action:     Contact the development organization.
//
// 000003,      "Unexpected switch case in %s"
// *Cause:      An unexpected switch to default has occurred.
//
// *Action:     Contact the development organization.
//
// 000004,      "sltbev() call failed"
// *Cause:      A call to sltbev() had failed.
//
// *Action:     Contact the development organization.
//
// 000005,      "Invalid parameter in internal function %s"
// *Cause:      Invalid parameter has been passed into an internal
//              function.
//
// *Action:     Contact the development organization.
// 00006,       "Invalid Standard File ID Descriptor"
// *Cause:      The function lfiostd() was called with an invalid File ID
//              Descriptor.  The valid File ID Descriptors are LFISTDIN_INDEX,
//              LFISTDOUT_INDEX, and LFISTDERR_INDEX.
//
// *Action:     Check the call to lfiostd() to make sure it is
//              correct.
//
//
// 00007,       "List element not found"
// *Cause:      A call to lfillmem() had failed.
//
// *Action:     Contact development service
//
// 00008,       "lficstd failed when calling lfibfr()"
// *Cause:      A call to lficstd() had failed.
//
// *Action:     Contact development service
//