linux C 常用数学函数篇
来源:互联网 发布:银行家算法c语言编程 编辑:程序博客网 时间:2024/04/30 01:56
abs(计算整型数的绝对值)
main(){
int ansert;
answer = abs(-12);
printf("|-12| = %dn", answer);
}
acos(取反余弦函数数值)
main (){
double angle;
angle = acos(0.5);
printf("angle = %fn", angle);
}
asin(取反正弦函数值)
main()
{
double angle;
angle = asin (0.5);
printf("angle = %fn",angle);
}
atan(取反正切函数值)
main()
{
double angle;
angle =atan(1);
printf("angle = %fn",angle);
}
atan2(取得反正切函数值)
main()
{
double angle;
angle = atan2(1,2);
printf("angle = %fn", angle);
}
ceil(取不小于参数的最小整型数)
main()
{
double value[ ]={4.8,1.12,-2.2,0};
int i;
for (i=0;value[i]!=0;i++)
printf("%f=>%fn",value[i],ceil(value[i]));
}
1.120000=>2.000000
-2.200000=>-2.000000
cos(取余玄函数值)
main()
{
double answer = cos(0.5);
printf("cos (0.5) = %fn",answer);
}
cosh(取双曲线余玄函数值)
main()
{
double answer = cosh(0.5);
printf("cosh(0.5) = %fn",answer);
}
exp(计算指数)
main()
{
double answer;
answer = exp (10);
printf("e^10 =%fn", answer);
}
frexp(将浮点型数分为底数与指数)
main()
{
int exp;
double fraction;
fraction = frexp (1024,&exp);
printf("exp = %dn",exp);
printf("fraction = %fn", fraction);
}
fraction = 0.500000 /* 0.5*(2^11)=1024*/
ldexp(计算2的次方值)
#include<math.h>
main()
{
int exp;
double x,answer;
answer = ldexp(3,2);
printf("3*2^(2) = %fn",answer);
}
log(计算以e 为底的对数值)
main()
{
double answer;
answer = log (100);
printf("log(100) = %fn",answer);
}
log10(计算以10 为底的对数值)
main()
{
double answer;
answer = log10(100);
printf("log10(100) = %fn",answer);
}
pow(计算次方值)
main()
{
double answer;
answer =pow(2,10);
printf("2^10 = %fn", answer);
}
main()
{
double answer = sin (0.5);
printf("sin(0.5) = %fn",answer);
}
sinh(取双曲线正玄函数值)
main()
{
double answer = sinh (0.5);
printf("sinh(0.5) = %fn",answer);
}
sqrt(计算平方根值)
#include<math.h>
main()
{
double root;
root = sqrt (200);
printf("answer is %fn",root);
}
tan(取正切函数值)
main()
{
double answer = tan(0.5);
printf("tan (0.5) = %fn",answer);
}
tanh(取双曲线正切函数值)
main()
{
double answer = tanh(0.5);
printf("tanh(0.5) = %fn",answer);
}
相关函数
labs, fabs表头文件
#include<stdlib.h>定义函数
int abs (int j)函数说明
abs()用来计算参数j的绝对值,然后将结果返回。返回值
返回参数j的绝对值结果。范例
#ingclude <stdlib.h>main(){
int ansert;
answer = abs(-12);
printf("|-12| = %dn", answer);
}
执行
|-12| = 12acos(取反余弦函数数值)
相关函数
asin , atan , atan2 , cos , sin , tan表头文件
#include <math.h>定义函数
double acos (double x);函数说明
acos()用来计算参数x的反余弦值,然后将结果返回。参数x范围为-1至1之间,超过此范围则会失败。返回值
返回0至PI之间的计算结果,单位为弧度,在函数库中角度均以弧度来表示。错误代码
EDOM参数x超出范围。附加说明
使用GCC编译时请加入-lm。范例
#include <math.h>main (){
double angle;
angle = acos(0.5);
printf("angle = %fn", angle);
}
执行
angle = 1.047198asin(取反正弦函数值)
相关函数
acos , atan , atan2 , cos , sin , tan表头文件
#include <math.h>定义函数
double asin (double x)函数说明
asin()用来计算参数x的反正弦值,然后将结果返回。参数x范围为-1至1之间,超过此范围则会失败。返回值
返回-PI/2之PI/2之间的计算结果。错误代码
EDOM参数x超出范围附加说明
使用GCC编译时请加入-lm范例
#include<math.h>main()
{
double angle;
angle = asin (0.5);
printf("angle = %fn",angle);
}
执行
angle = 0.523599atan(取反正切函数值)
相关函数
acos,asin,atan2,cos,sin,tan表头文件
#include<math.h>定义函数
double atan(double x);函数说明
atan()用来计算参数x的反正切值,然后将结果返回。返回值
返回-PI/2至PI/2之间的计算结果。附加说明
使用GCC编译时请加入-lm范例
#include<math.h>main()
{
double angle;
angle =atan(1);
printf("angle = %fn",angle);
}
执行
angle = 1.570796atan2(取得反正切函数值)
相关函数
acos,asin,atan,cos,sin,tan表头文件
#include<math.h>定义函数
double atan2(double y,double x);函数说明
atan2()用来计算参数y/x的反正切值,然后将结果返回。返回值
返回-PI/2 至PI/2 之间的计算结果。附加说明
使用GCC编译时请加入-lm 范例
#include<math.h>main()
{
double angle;
angle = atan2(1,2);
printf("angle = %fn", angle);
}
执行
angle = 0.463648ceil(取不小于参数的最小整型数)
相关函数
fabs表头文件
#include <math.h>定义函数
double ceil (double x);函数说明
ceil()会返回不小于参数x的最小整数值,结果以double形态返回。返回值
返回不小于参数x的最小整数值。附加说明
使用GCC编译时请加入-lm。范例
#include<math.h>main()
{
double value[ ]={4.8,1.12,-2.2,0};
int i;
for (i=0;value[i]!=0;i++)
printf("%f=>%fn",value[i],ceil(value[i]));
}
执行
4.800000=>5.0000001.120000=>2.000000
-2.200000=>-2.000000
cos(取余玄函数值)
相关函数
acos,asin,atan,atan2,sin,tan表头文件
#include<math.h>定义函数
double cos(double x);函数说明
cos()用来计算参数x 的余玄值,然后将结果返回。返回值
返回-1至1之间的计算结果。附加说明
使用GCC编译时请加入-lm。范例
#include<math.h>main()
{
double answer = cos(0.5);
printf("cos (0.5) = %fn",answer);
}
执行
cos(0.5) = 0.877583cosh(取双曲线余玄函数值)
相关函数
sinh,tanh表头文件
#include<math.h>定义函数
double cosh(double x);函数说明
cosh()用来计算参数x的双曲线余玄值,然后将结果返回。数学定义式为:(exp(x)+exp(-x))/2。返回值
返回参数x的双曲线余玄值。附加说明
使用GCC编译时请加入-lm。范例
#include<math.h>main()
{
double answer = cosh(0.5);
printf("cosh(0.5) = %fn",answer);
}
执行
cosh(0.5) = 1.127626exp(计算指数)
相关函数
log,log10,pow表头文件
#include<math.h>定义函数
double exp(double x);函数说明
exp()用来计算以e为底的x次方值,即ex值,然后将结果返回。返回值
返回e的x次方计算结果。附加说明
使用GCC编译时请加入-lm。范例
#include<math.h>main()
{
double answer;
answer = exp (10);
printf("e^10 =%fn", answer);
}
执行
e^10 = 22026.465795frexp(将浮点型数分为底数与指数)
相关函数
ldexp,modf表头文件
#include<math.h>定义函数
double frexp( double x, int *exp);函数说明
frexp()用来将参数x 的浮点型数切割成底数和指数。底数部分直接返回,指数部分则借参数exp 指针返回,将返回值乘以2 的exp次方即为x的值 返回值
返回参数x的底数部分,指数部分则存于exp指针所指的地址。附加说明
使用GCC编译时请加入-lm。范例
#include <math.h>main()
{
int exp;
double fraction;
fraction = frexp (1024,&exp);
printf("exp = %dn",exp);
printf("fraction = %fn", fraction);
}
执行
exp = 11fraction = 0.500000 /* 0.5*(2^11)=1024*/
ldexp(计算2的次方值)
相关函数
frexp表头文件
#include<math.h>定义函数
double ldexp(double x,int exp);函数说明
ldexp()用来将参数x乘上2的exp次方值,即x*2exp。返回值
返回计算结果。附加说明
使用GCC编译时请加入-lm。范例:
/* 计算3*(2^2)=12 */#include<math.h>
main()
{
int exp;
double x,answer;
answer = ldexp(3,2);
printf("3*2^(2) = %fn",answer);
}
执行
3*2^(2) = 12.000000log(计算以e 为底的对数值)
相关函数
exp,log10,pow表头文件
#include <math.h>定义函数
double log (double x);函数说明
log()用来计算以e为底的x 对数值,然后将结果返回。返回值
返回参数x的自然对数值。错误代码
EDOM 参数x为负数,ERANGE 参数x为零值,零的对数值无定义。附加说明
使用GCC编译时请加入-lm。范例
#include<math.h>main()
{
double answer;
answer = log (100);
printf("log(100) = %fn",answer);
}
执行
log(100) = 4.605170log10(计算以10 为底的对数值)
相关函数
exp,log,pow表头文件
#include<math.h>定义函数
double log10(double x);函数说明
log10()用来计算以10为底的x对数值,然后将结果返回。返回值
返回参数x以10为底的对数值。错误代码
EDOM参数x为负数。RANGE参数x为零值,零的对数值无定义。附加说明
使用GCC编译时请加入-lm。范例
#include<math.h>main()
{
double answer;
answer = log10(100);
printf("log10(100) = %fn",answer);
}
执行
log10(100) = 2.000000pow(计算次方值)
相关函数
exp,log,log10表头文件
#include<math.h>定义函数
double pow(double x,double y);函数说明
pow()用来计算以x为底的y次方值,即xy值,然后将结果返回。返回值
返回x的y次方计算结果。错误代码
EDOM 参数x为负数且参数y不是整数。附加说明
使用GCC编译时请加入-lm。范例
#include <math.h>main()
{
double answer;
answer =pow(2,10);
printf("2^10 = %fn", answer);
}
sin(取正玄函数值)
相关函数
acos,asin,atan,atan2,cos,tan表头文件
#include<math.h>定义函数
double sin(double x);函数说明
sin()用来计算参数x的正玄值,然后将结果返回。返回值
返回-1 至1之间的计算结果。附加说明
使用GCC编译时请加入-lm。范例
#include<math.h>main()
{
double answer = sin (0.5);
printf("sin(0.5) = %fn",answer);
}
执行
sin(0.5) = 0.479426sinh(取双曲线正玄函数值)
相关函数
cosh,tanh表头文件
#include<math.h>定义函数
double sinh( double x);函数说明
sinh()用来计算参数x的双曲线正玄值,然后将结果返回。数学定义式为:(exp(x)-exp(-x))/2。返回值
返回参数x的双曲线正玄值。附加说明
使用GCC编译时请加入-lm。范例
#include<math.h>main()
{
double answer = sinh (0.5);
printf("sinh(0.5) = %fn",answer);
}
执行
sinh(0.5) = 0.521095sqrt(计算平方根值)
相关函数
hypotq表头文件
#include<math.h>定义函数
double sqrt(double x);函数说明
sqrt()用来计算参数x的平方根,然后将结果返回。参数x必须为正数。返回值
返回参数x的平方根值。错误代码
EDOM 参数x为负数。附加说明
使用GCC编译时请加入-lm。范例
/* 计算200的平方根值*/#include<math.h>
main()
{
double root;
root = sqrt (200);
printf("answer is %fn",root);
}
执行
answer is 14.142136tan(取正切函数值)
相关函数
atan,atan2,cos,sin表头文件
#include <math.h>定义函数
double tan(double x);函数说明
tan()用来计算参数x的正切值,然后将结果返回。返回值
返回参数x的正切值。附加说明
使用GCC编译时请加入-lm。范例
#include<math.h>main()
{
double answer = tan(0.5);
printf("tan (0.5) = %fn",answer);
}
执行
tan(0.5) = 0.546302tanh(取双曲线正切函数值)
相关函数
cosh,sinh表头文件
#include<math.h>定义函数
double tanh(double x);函数说明
tanh()用来计算参数x的双曲线正切值,然后将结果返回。数学定义式为:sinh(x)/cosh(x)。返回值
返回参数x的双曲线正切值。
范例
#include<math.h>main()
{
double answer = tanh(0.5);
printf("tanh(0.5) = %fn",answer);
}
执行
tanh(0.5) = 0.462117
- linux C 常用数学函数篇
- Linux 常用C函数(常用数学函数篇1)
- Linux 常用C函数(常用数学函数篇2)
- Linux 常用C函数(常用数学函数篇2)
- Linux 常用C函数(常用数学函数篇1)
- linux常用c函数 常用数学函数篇
- Linux C 函数参考之常用数学函数篇
- Linux C Function()参考之常用数学函数篇
- 常用数学函数全集 Linux C
- linux 常用数学函数
- c语言常用数学函数
- c语言常用数学函数
- object-c常用数学函数
- C/C++常用数学函数
- C语言常用数学函数
- C语言常用数学函数
- c语言常用数学函数
- [C语言]常用C语言数学函数
- linux C 日期时间篇
- CSS实现表格变色两例
- 数据库几个简单的概念
- 人生的感悟
- 测试测试
- linux C 常用数学函数篇
- 程序员的编辑器——VIM
- 未来软件开发三大关键特征
- 没有结果的谈判
- GCC使用手册
- 第四章的“结构”已经学完
- linux开发的常用资源
- 2006年12月2作业
- C语言复习