Remote Access To MySQL
来源:互联网 发布:联通网络电视破解软件 编辑:程序博客网 时间:2024/06/05 16:01
By default remote access to the MySQL database server is disabled for security reasons. However, some time you need to provide remote access to database server from home or a web server. If you want to remotely access to the database server from the web server or home, follow this quick tutorial.
Task: MySQL Server Remote Access
You need type the following commands which will allow remote connections.
Step # 1: Login Using SSH (if server is outside your data center)
First, login over ssh to remote MySQL database server:
ssh user@server1.cyberciti.biz
Step # 2: Edit my.cnf File
Once connected you need to edit the MySQL server configuration file my.cnf using a text editor such as vi.
- If you are using Debian Linux file is located at /etc/mysql/my.cnf location
- If you are using Red Hat Linux/Fedora/Centos Linux file is located at /etc/my.cnf location
- If you are using FreeBSD you need to create a file /var/db/mysql/my.cnf
Edit /etc/my.cnf, run:# vi /etc/my.cnf
Step # 3: Once file opened, locate line that read as follows
[mysqld]
Make sure line skip-networking is commented (or remove line) and add following line
bind-address=YOUR-SERVER-IP
For example, if your MySQL server IP is 65.55.55.2 then entire block should be look like as follows:
[mysqld]user = mysqlpid-file = /var/run/mysqld/mysqld.pidsocket = /var/run/mysqld/mysqld.sockport = 3306basedir = /usrdatadir = /var/lib/mysqltmpdir = /tmplanguage = /usr/share/mysql/Englishbind-address = 65.55.55.2# skip-networking..........
Where,
- bind-address : IP address to bind to.
- skip-networking : Don’t listen for TCP/IP connections at all. All interaction with mysqld must be made via Unix sockets. This option is highly recommended for systems where only local requests are allowed. Since you need to allow remote connection this line should be removed from my.cnf or put it in comment state.
Step# 4 Save and Close the file
If you are using Debian / Ubuntu Linux, type the following command to restart the mysql server:# /etc/init.d/mysql restart
If you are using RHEL / CentOS / Fedora / Scientific Linux, type the following command to restart the mysql server:# /etc/init.d/mysqld restart
If you are using FreeBSD, type the following command to restart the mysql server:# /usr/local/etc/rc.d/mysql-server stop
# /usr/local/etc/rc.d/mysql-server start
OR# /usr/local/etc/rc.d/mysql-server restart
Step # 5 Grant access to remote IP address
Connect to mysql server:$ mysql -u root -p mysql
Grant access to a new database
If you want to add a new database called foo for user bar and remote IP 202.54.10.20 then you need to type the following commands at mysql> prompt:mysql> CREATE DATABASE foo;
mysql> GRANT ALL ON foo.* TO bar@'202.54.10.20' IDENTIFIED BY 'PASSWORD';
How Do I Grant Access To An Existing Database?
Let us assume that you are always making connection from remote IP called 202.54.10.20 for database called webdb for user webadmin, To grant access to this IP address type the following command At mysql> prompt for existing database, enter:mysql> update db set Host='202.54.10.20' where Db='webdb';
mysql> update user set Host='202.54.10.20' where user='webadmin';
Step # 6: Logout of MySQL
Type exit command to logout mysql:mysql> exit
Step # 7: Open port 3306
You need to open TCP port 3306 using iptables or BSD pf firewall.
A sample iptables rule to open Linux iptables firewall
/sbin/iptables -A INPUT -i eth0 -p tcp --destination-port 3306 -j ACCEPT
OR only allow remote connection from your web server located at 10.5.1.3:
/sbin/iptables -A INPUT -i eth0 -s 10.5.1.3 -p tcp --destination-port 3306 -j ACCEPT
OR only allow remote connection from your lan subnet 192.168.1.0/24:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
Finally save all rules (RHEL / CentOS specific command):# service iptables save
A sample FreeBSD / OpenBSD pf rule ( /etc/pf.conf)
pass in on $ext_if proto tcp from any to any port 3306
OR allow only access from your web server located at 10.5.1.3:
pass in on $ext_if proto tcp from 10.5.1.3 to any port 3306 flags S/SA synproxy state
Step # 8: Test it
From your remote system or your desktop type the following command:$ mysql -u webadmin –h 65.55.55.2 –p
Where,
- -u webadmin: webadmin is MySQL username
- -h IP or hostname: 65.55.55.2 is MySQL server IP address or hostname (FQDN)
- -p : Prompt for password
You can also use the telnet or nc command to connect to port 3306 for testing purpose:$ echo X | telnet -e X 65.55.55.2 3306
OR$ nc -z -w1 65.55.55.2 3306
Sample outputs:
Connection to 65.55.55.2 3306 port [tcp/mysql] succeeded!
- Remote Access To MySQL
- How to access remote mysql
- How Do I Enable Remote Access To MySQL Database Server?
- mysql remote access
- mysql remote access
- 12. 开启 mysql remote access
- Google software allows remote access to PCs
- Remote Access to the Fedora Linux Desktop
- Remote Access to the CentOS Desktop
- How to Remote Access Oracle DB
- Remote Access to IPython Notebooks via SSH
- access to mysql--工具
- Use reverse ssh tunnel to access remote machines behind NAT
- Windows 7 Remote Access to Ubuntu 12.04 Desktop using X11VNC
- Unauthe nticated r sync access to Remote Root Code Execution
- remote: Permission to xxxxx/javaeelzw.git denied to xxxx. fatal: unable to access 'https://git
- 配置远程连接mysql数据库 Connect to remote mysql database
- How to configure ODBC DSN in Client to access remote DB2 for Windows
- 织梦(dedecms)仿站教程第第十四讲—特定栏目图片调用
- wince6.0 PB工程编译选项简介
- 用事物变式( transaction variants )隐藏sap便准程序的field
- sphinx 全文搜索 软件 工具 的安装使用
- [Axure]原型设计软件:Axure RP简单介绍与基础入门学习目录
- Remote Access To MySQL
- Alax技术实现的基本原理——XMLHttpRequest对象的使用
- UVa 10033 - Interpreter
- zigbee学习笔记3----cc2530 外部中断实验
- 格式化相关知识
- BIT 1031 Binary Tree Traversals
- cocos2d-x初学笔记04:切换场景Scene
- 编成技术19
- 放弃?站长们站起来!