sql 查询重复行数据
来源:互联网 发布:存储软件测试 招聘 编辑:程序博客网 时间:2024/05/18 01:16
1、查找表中多余的重复记录,重复记录是根据单个字段(peopleId)来判断
select* from people
where peopleIdin (select peopleId from people group by peopleId having count(peopleId)> 1)
例二:
select *from testtable
where numeber in (select numberfrom people group by numberhaving count(number) > 1 )
可以查出testtable表中number相同的记录
2、删除表中多余的重复记录,重复记录是根据单个字段(peopleId)来判断,只留有rowid最小的记录
deletefrom people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
and rowidnot in (selectmin(rowid) from people group by peopleId having count(peopleId )>1)
3、查找表中多余的重复记录(多个字段)
select* from vitae a
where (a.peopleId,a.seq)in (select peopleId,seqfrom vitae group by peopleId,seq having count(*)> 1)
4、删除表中多余的重复记录(多个字段),只留有rowid最小的记录
deletefrom vitae a
where (a.peopleId,a.seq)in (select peopleId,seqfrom vitae group by peopleId,seqhaving count(*)> 1)
and rowidnot in (selectmin(rowid) from vitae groupby peopleId,seqhaving count(*)>1)
5、查找表中多余的重复记录(多个字段),不包含rowid最小的记录
select* from vitae a
where (a.peopleId,a.seq)in (select peopleId,seqfrom vitae group by peopleId,seqhaving count(*)> 1)
and rowidnot in (selectmin(rowid) from vitae groupby peopleId,seqhaving count(*)>1)
(二)
比方说
在A表中存在一个字段“name”,
而且不同记录之间的“name”值有可能会相同,
现在就是需要查询出在该表中的各记录之间,“name”值存在重复的项;
Select Name,Count(*)From A Group By NameHaving Count(*)> 1
如果还查性别也相同大则如下:
Select Name,sex,Count(*)From A Group By Name,sexHaving Count(*)> 1
(三)
方法一
declare@max integer,@idinteger
declare cur_rowscursor local for select 主字段,count(*)from 表名 group by 主字段having count(*)>; 1
open cur_rows
fetch cur_rowsinto @id,@max
while@@fetch_status=0
begin
select@max =@max -1
setrowcount @max
deletefrom 表名 where 主字段 =@id
fetch cur_rowsinto @id,@max
end
close cur_rows
setrowcount 0
方法二
有两个意义上的重复记录,一是完全重复的记录,也即所有字段均重复的记录,二是部分关键字段重复的记录,比如Name字段重复,而其他字段不一定重复或都重复可以忽略。
1、对于第一种重复,比较容易解决,使用
selectdistinct * from tableName
就可以得到无重复记录的结果集。
如果该表需要删除重复的记录(重复记录保留1条),可以按以下方法删除
selectdistinct * into #Tmpfrom tableName
droptable tableName
select* into tableNamefrom #Tmp
droptable #Tmp
发生这种重复的原因是表设计不周产生的,增加唯一索引列即可解决。
2、这类重复问题通常要求保留重复记录中的第一条记录,操作方法如下
假设有重复的字段为Name,Address,要求得到这两个字段唯一的结果集
selectidentity(int,1,1)as autoID, * into #Tmpfrom tableName
selectmin(autoID) as autoID into #Tmp2from #Tmp group by Name,autoID
select* from #Tmpwhere autoID in(select autoIDfrom #tmp2)
最后一个select即得到了Name,Address不重复的结果集(但多了一个autoID字段,实际写时可以写在select子句中省去此列)
(四)
2、删除表中多余的重复记录,重复记录是根据单个字段(peopleId)来判断,只留有rowid最小的记录
deletefrom people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
and rowidnot in (selectmin(rowid) from people group by peopleId having count(peopleId )>1)
3、查找表中多余的重复记录(多个字段)
select* from vitae a
where (a.peopleId,a.seq)in (select peopleId,seqfrom vitae group by peopleId,seq having count(*)> 1)
4、删除表中多余的重复记录(多个字段),只留有rowid最小的记录
deletefrom vitae a
where (a.peopleId,a.seq)in (select peopleId,seqfrom vitae group by peopleId,seqhaving count(*)> 1)
and rowidnot in (selectmin(rowid) from vitae groupby peopleId,seqhaving count(*)>1)
5、查找表中多余的重复记录(多个字段),不包含rowid最小的记录
select* from vitae a
where (a.peopleId,a.seq)in (select peopleId,seqfrom vitae group by peopleId,seqhaving count(*)> 1)
and rowidnot in (selectmin(rowid) from vitae groupby peopleId,seqhaving count(*)>1)
(二)
比方说
在A表中存在一个字段“name”,
而且不同记录之间的“name”值有可能会相同,
现在就是需要查询出在该表中的各记录之间,“name”值存在重复的项;
Select Name,Count(*)From A Group By NameHaving Count(*)> 1
如果还查性别也相同大则如下:
Select Name,sex,Count(*)From A Group By Name,sexHaving Count(*)> 1
(三)
方法一
declare@max integer,@idinteger
declare cur_rowscursor local for select 主字段,count(*)from 表名 group by 主字段having count(*)>; 1
open cur_rows
fetch cur_rowsinto @id,@max
while@@fetch_status=0
begin
select@max =@max -1
setrowcount @max
deletefrom 表名 where 主字段 =@id
fetch cur_rowsinto @id,@max
end
close cur_rows
setrowcount 0
方法二
有两个意义上的重复记录,一是完全重复的记录,也即所有字段均重复的记录,二是部分关键字段重复的记录,比如Name字段重复,而其他字段不一定重复或都重复可以忽略。
1、对于第一种重复,比较容易解决,使用
selectdistinct * from tableName
就可以得到无重复记录的结果集。
如果该表需要删除重复的记录(重复记录保留1条),可以按以下方法删除
selectdistinct * into #Tmpfrom tableName
droptable tableName
select* into tableNamefrom #Tmp
droptable #Tmp
发生这种重复的原因是表设计不周产生的,增加唯一索引列即可解决。
2、这类重复问题通常要求保留重复记录中的第一条记录,操作方法如下
假设有重复的字段为Name,Address,要求得到这两个字段唯一的结果集
selectidentity(int,1,1)as autoID, * into #Tmpfrom tableName
selectmin(autoID) as autoID into #Tmp2from #Tmp group by Name,autoID
select* from #Tmpwhere autoID in(select autoIDfrom #tmp2)
最后一个select即得到了Name,Address不重复的结果集(但多了一个autoID字段,实际写时可以写在select子句中省去此列)
(四)
查询重复
select* from tablenamewhere id in (
select idfrom tablename
groupby id
havingcount(id) > 1
)
- sql 查询重复行数据
- sql 查询重复行数据
- sql 查询重复行数据
- sql 查询第n行数据
- SQL查询显示行号、随机查询、取指定行数据
- SQL查询显示行号、随机查询、取指定行数据
- SQL查询显示行号、随机查询、取指定行数据
- SQL查询显示行号、随机查询、取指定行数据
- SQL查询显示行号、随机查询、取指定行数据
- SQL查询显示行号、随机查询、取指定行数据
- SQL查询显示行号、随机查询、取指定行数据
- mysql查询表中某列不重复的行数
- sql 从查询结果中取第1001至1100行数据
- SQL查询结果集游标循环获得行数据
- SQL查询分组后的第几行数据
- SQL Server 查询结果多行数据拼接
- sql查询出来的一列多行数据拼接起来
- SQL查询之返回最值所在的行数据
- 初次使用mysql
-
- 实际参数和形式参数
- C/C++面试之算法系列--如何利用数学思想解1/2/5组合问题
- Java 线程池学习
- sql 查询重复行数据
- Linux下memory和IO的读写工具
- 铁拳男人
- vector 在c++中resize 和reserve的区别
- Ubuntu12.04 LTS 下安装Aptana Studio3笔记
- 近期
- 关于MyEclipse8.5 错误 background indexer crash recovery java.lang.stackoverflowerror
- 孤儿进程组
- 机器学习前沿热点–Deep Learning