ARM Linux使用SD卡根文件系统
来源:互联网 发布:mac pro 无法安装win7 编辑:程序博客网 时间:2024/05/15 19:47
1. 输入 m 显示所有命令列示。
2. 输入 p 显示硬盘分割情形。
3. 输入 a 设定硬盘启动区。
4. 输入 n 设定新的硬盘分割区。
4.1. 输入 e 硬盘为[扩展]分割区(extend)。
4.2. 输入 p 硬盘为[首要]分割区(primary)。
5. 输入 t 改变硬盘分割区属性。
6. 输入 d 删除硬盘分割区属性。
7. 输入 q 结束不存入硬盘分割区属性。
8. 输入 w 结束并写入硬盘分割区属性如果以前U盘有分区,需要输入d命令来依次删除分区,以下执行两次n命令创建一个 400M的FAT分区,以及把剩下的分区设为ext3,最后用w命令把结果保存下来.
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1020, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-1020, default 1020): +400M
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (202-1020, default 202):
Using default value 202
Last cylinder or +size or +sizeM or +sizeK (202-1020, default 1020):
Using default value 1020
Command (m for help): p
Disk /dev/sdb: 2041 MB, 2041577472 bytes
63 heads, 62 sectors/track, 1020 cylinders
Units = cylinders of 3906 * 512 = 1999872 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 201 392522 b W95 FAT32
/dev/sdb2 202 1020 1599507 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: 设备或资源忙.
The kernel still uses the old table.
The new table will be used at the next reboot.
WARNING: If you have created or modified any DOS 6.x
partitions, please see the fdisk manual page for additional
information.
Syncing disks.
<*> Ext3 journalling file system support
[*] Ext3 extended attributes
[*] Ext3 POSIX Access Control Lists
[*] Ext3 Security Labels
[*] MMC debugging
[ ] Allow unsafe resume (DANGEROUS)
*** MMC/SD/SDIO Card Drivers ***
<*> MMC block device driver
[*] Use bounce buffer for simple hosts
<*> SDIO UART/GPS class support
<*> MMC host test driver
*** MMC/SD/SDIO Host Controller Drivers ***
<*> Secure Digital Host Controller Interface support
<*> Samsung S3C SD/MMC Card Interface support
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
s3c2440-sdi s3c2440-sdi: running at 16875kHz (requested: 25000kHz).
s3c2440-sdi s3c2440-sdi: running at 16875kHz (requested: 25000kHz).
mmc0: new SD card at address 0002
mmcblk0: mmc0:0002 00000 1.90 GiB
mmcblk0: p1 p2
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
brw-rw---- 1 root root 179, 0 Sep 22 10:48 /dev/mmcblk0
brw-rw---- 1 root root 179, 2 Sep 22 10:48 /dev/mmcblk0p2
- ARM-Linux使用SD卡根文件系统
- ARM-Linux使用SD卡根文件系统
- ARM Linux使用SD卡根文件系统
- ARM Linux使用SD卡根文件系统
- 使用SD卡根文件系统
- linux 使用SD卡做根文件系统
- SD卡文件系统启动linux
- 把uboot、linux内核和根文件系统烧写到SD卡
- ARM 上直接操作SD卡,无文件系统地。。。
- Linux 下 SD 卡 只读文件系统
- 使用SD卡扩展BBB文件系统存储空间
- arm-linux(ubuntu) 根文件系统 制作
- 为 ARM Linux 制作根文件系统
- Arm-Linux根文件系统网络配置小结
- arm linux挂载nfs根文件系统
- Arm-Linux根文件系统网络配置小结
- Arm-Linux根文件系统网络配置小结
- arm linux 挂载initramfs根文件系统
- 一维树状数组
- runtime modeler error: Wrapper class com.ws.jaxws.SayHello is not found
- linux配置activemq5使用mysql数据库
- word下设置多个起始页面
- 面向对象主函数
- ARM Linux使用SD卡根文件系统
- MySQL索引类型一览 让MySQL高效运行起来
- android 项目R.java 文件不生成小总结
- Mysql基本命令
- 最火的Android开源项目(2
- 常用jar包下载地址
- Hibernate学习笔记10--关联关系之多对多
- Android平台移植初解
- 微软等名企面试 题2