init: sys_prop: permission denied uid:1000 name:app.is.3d

来源：互联网发布：简单绘制平面图软件编辑：程序博客网时间：2024/04/29 16:08

在init里面增加了ro属性的设置后出现这个打印，并且system启动不了了。

看样子是权限的问题，之前设置的是AID_SYSTEM的权限，现在改成AID_APP测试一下看看。还是不行。

前面也有错误，service flash_recovery /system/etc/install-recovery.sh执行不了

cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
root@android:/ # hi_media: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
hi_mmz: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
hi_common: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
hi_c51: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
hi_dmac: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
+++disp layerid 2 DispNum 0
tde: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
hi_gpio: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
hi_ndpt: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
warning: `mediaserver' uses 32-bit capabilities (legacy support in use)
hi_mpi: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
hifb: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
jpeg: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
png: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
ir_keyboad: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
hi_svdec: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
hi_otp: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
ufsd: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
hi_gpioi2c: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
hi_i2c: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
galcore: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '
hi_vinput: version magic '3.0.8_hisilicon mod_unload ARMv7 ' should be '3.0.8_hisilicon ARMv7 '

不知道这些有没有影响？