LA 3263 - That Nice Euler Circuit 欧拉定理
来源:互联网 发布:达芬奇调色 mac 编辑:程序博客网 时间:2024/05/13 06:21
点击打开链接
3263 - That Nice Euler Circuit
Time limit: 3.000 seconds
Little Joey invented a scrabble machine that he called Euler, after the great mathematician. In his primary school Joey heard about the nice story of how Euler started the study about graphs. The problem in that story was - let me remind you - to draw a graph on a paper without lifting your pen, and finally return to the original position. Euler proved that you could do this if and only if the (planar) graph you created has the following two properties: (1) The graph is connected; and (2) Every vertex in the graph has even degree.
Joey's Euler machine works exactly like this. The device consists of a pencil touching the paper, and a control center issuing a sequence of instructions. The paper can be viewed as the infinite two-dimensional plane; that means you do not need to worry about if the pencil will ever go off the boundary.
In the beginning, the Euler machine will issue an instruction of the form (X0, Y0) which moves the pencil to some starting position(X0,Y0). Each subsequent instruction is also of the form(X',Y'), which means to move the pencil from the previous position to the new position(X',Y'), thus draw a line segment on the paper. You can be sure that the new position is different from the previous position for each instruction. At last, the Euler machine will always issue an instruction that move the pencil back to the starting position (X0, Y0). In addition, the Euler machine will definitely not draw any lines that overlay other lines already drawn. However, the lines may intersect.
After all the instructions are issued, there will be a nice picture on Joey's paper. You see, since the pencil is never lifted from the paper, the picture can be viewed as an Euler circuit.
Your job is to count how many pieces (connected areas) are created on the paper by those lines drawn by Euler.
Input
There are no more than 25 test cases. Ease case starts with a line containing an integerN4, which is the number of instructions in the test case. The followingN pairs of integers give the instructions and appear on a single line separated by single spaces. The first pair is the first instruction that gives the coordinates of the starting position. You may assume there are no more than 300 instructions in each test case, and all the integer coordinates are in the range (-300, 300). The input is terminated whenN is 0.
Output
For each test case there will be one output line in the format
Case x: There are w pieces.,
where x is the serial number starting from 1.
Note: The figures below illustrate the two sample input cases.
Sample Input
50 0 0 1 1 1 1 0 0 0 7 1 1 1 5 2 1 2 5 5 1 3 5 1 1 0
Sample Output
Case 1: There are 2 pieces. Case 2: There are 5 pieces.
题意:平面上有一个N端点的一笔画,第N个端点总是和第一个端点重合,因此图案是一条闭合曲线。组成一笔画的线段可以相交,但是不会部分重叠,求这些线段将平面分成多少部分。
欧拉定理:设平面的顶点数,边数和面数分别是V,E和F,则V+F-E=2.则只要求出顶点数V和边数E,就可以求出F=E+2-V。改平面的结点由两部分组成,即原来的结点和新增的结点。由于可能出现三点共线,需要删除重复的点。
#include<stdio.h>#include<algorithm>#include<math.h>#define maxn 330using namespace std;struct Point{ double x,y; Point(double x=0,double y=0):x(x),y(y){}//构造函数};typedef Point Vector;Point P[maxn],V[maxn*maxn];//向量+向量=向量,点+向量=点Point operator+(Point A,Point B){ return Point(A.x+B.x,A.y+B.y);}//点-点=向量Point operator-(Point A,Point B){ return Point(A.x-B.x,A.y-B.y);}//向量*数=向量Point operator*(Point A,double p){ return Point(A.x*p,A.y*p);}//向量/数=向量Point operator/(Point A,double p){ return Point(A.x/p,A.y/p);}double eps=1e-10;double Cross(Point A,Point B){ return A.x*B.y-A.y*B.x;}//如果等于0,返回0,小于0返回-1,大于0,返回1int dcmp(double x){ if(fabs(x)<eps)return 0;else return x<0?-1:1;}//判断是否相等bool operator==(const Point& a,const Point &b){ return dcmp(a.x-b.x)==0&&dcmp(a.y-b.y)==0;}//判断线段相交(不含端点)bool SegmentProperIntersection(Point a1,Point a2,Point b1,Point b2){ double c1=Cross(a2-a1,b1-a1),c2=Cross(a2-a1,b2-a1), c3=Cross(b2-b1,a1-b1),c4=Cross(b2-b1,a2-b1); return dcmp(c1)*dcmp(c2)<0&&dcmp(c3)*dcmp(c4)<0;}//直线交点公式Point GetLineIntersection(Point P,Point V,Point Q,Point W){ Point u=P-Q; double t=Cross(W,u)/Cross(V,W); return P+V*t;}double Dot(Point A,Point B){ return A.x*B.x+A.y*B.y;}//判断一个点P是否在一条线段a1a2上bool OnSegment(Point p,Point a1,Point a2){ return dcmp(Cross(a1-p,a2-p))==0&&dcmp(Dot(a1-p,a2-p));}bool cmp(Point a,Point b){ if(a.x-b.x>eps) return true; else if(fabs(a.x-b.x)<eps&&a.y-b.y>eps) return true; return false;}int main(){ int n,cas=0; while(scanf("%d",&n),n) { for(int i=0;i<n;i++) { scanf("%lf%lf",&P[i].x,&P[i].y); V[i]=P[i]; } n--; int c=n,e=n; for(int i=0;i<n;i++) for(int j=i+1;j<n;j++) if(SegmentProperIntersection(P[i],P[i+1],P[j],P[j+1])) { V[c++]=GetLineIntersection(P[i],P[i+1]-P[i],P[j],P[j+1]-P[j]); } sort(V,V+c,cmp); c=unique(V,V+c)-V; for(int i=0;i<c;i++) for(int j=0;j<n;j++) if(OnSegment(V[i],P[j],P[j+1]))e++; printf("Case %d: There are %d pieces.\n",++cas,e+2-c); } return 0;}
- LA 3263 - That Nice Euler Circuit 欧拉定理
- LA 3263 That Nice Euler Circuit 欧拉定理 -
- LA 3236 That Nice Euler Circuit(欧拉定理)
- uvaLive 3263 That Nice Euler Circuit 欧拉定理
- hdu 1665 That Nice Euler Circuit(欧拉定理)
- POJ 2284 That Nice Euler Circuit (欧拉定理)
- poj2284 That Nice Euler Circuit(欧拉定理+枚举)
- uva 1342 - That Nice Euler Circuit(欧拉定理)
- LA 3263 - That Nice Euler Circuit
- UVALive 3263 That Nice Euler Circuit 计算几何欧拉定理
- UVALive 3263 That Nice Euler Circuit 计算几何+欧拉定理
- Uvalive 3263 That Nice Euler Circuit(几何欧拉定理)
- 平面上欧拉定理:poj 2284( LA 3263 ) That Nice Euler Circuit
- HDU 1665 or UVALive 3263 || That Nice Euler Circuit (欧拉定理求面数 F = E+2-V
- POJ 2284 That Nice Euler Circuit (LA 3263 HDU 1665)
- LA3263 That Nice Euler Circuit 2004_Shanghai 平面上的欧拉定理
- 【UVA】1342 - That Nice Euler Circuit(几何+欧拉定理)
- UVA 1342 - That Nice Euler Circuit(计算几何+欧拉定理)
- 程序猿装B指南
- java环境变量设置
- 初学QT心得
- bash中的数值运算
- hdoj 1698--Just a Hook 线段树练习
- LA 3263 - That Nice Euler Circuit 欧拉定理
- Spring Security起步
- hdu 1711 number sequence
- hdoj 1406 衰( ⊙ o ⊙ )!
- Element type "Resource" must be followed by either attribute specifications, ">" or "/>".
- Javascript中三个等号与两个等号的区别
- uva839
- python 搭建的服务器上面 运行项目出错的记录
- MySQL 远程登录与其常用命令的介绍