NAND FLASH
来源:互联网 发布:淘宝减肥药销量排行榜 编辑:程序博客网 时间:2024/05/01 04:32
NAND FLASH控制器:
接. 口:nFCE CLE ALE nFRE nFWE FRnB I/O0-I/O15 nand flash controller的对外接口
During reset, Nand flash controller will get information about the connected NAND flash through Pin status
(NCON(Adv flash), GPG13(Page size), GPG14(Address cycle), GPG15(Bus width) – refer to PIN
CONFIGURATION), After power-on or system reset is occurred, the NAND Flash controller load automatically the 4-
KBytes boot loader codes. After loading the bootloader codes, the boot loader code in steppingstone is executed
S3C2440A supports only software mode access. Using this mode, you can completely access the NAND flash
memory. The NAND Flash Controller supports direct access interface with the NAND flash memory.
1. Writing to the command register = the NAND Flash Memory command cycle
2. Writing to the address register = the NAND Flash Memory address cycle
3. Writing to the data register = write data to the NAND Flash Memory (write cycle)
4. Reading from the data register = read data from the NAND Flash Memory (read cycle)
5. Reading main ECC registers and Spare ECC registers = read data from the NAND Flash Memory
NOTE
In the software mode, you have to check the RnB status input pin by using polling or interrupt.
注意:NFDATA寄存器是一个32位的寄存器,读一次能获得4个字节的数据,可以将NFDATA变成一字节的buf
- Nand Flash
- NAND Flash
- nand flash
- NAND FLASH
- NAND FLASH
- nand flash
- Nand Flash
- NAND Flash
- NAND FLASH
- nand flash
- nand flash
- Nand flash
- NAND FLASH
- NAND FLASH
- NAND Flash
- Nand flash
- nand flash
- NAND FLASH
- vi的使用
- ZeroMQ,史上最快的消息队列 —– ZMQ的学习和研究
- Android中Socket大文件断点上传 .
- Java 字符串,byte[],16进制的字符串互转
- C# GridView点击某列打开新浏览器窗口
- NAND FLASH
- web小结
- 置换-选择排序
- java文件下载显示另存为
- 你愿意卖一辈子汽水,还是和我们一起改变这个世界?
- FCKeditor编辑器详细视频教程(170M)15讲
- 【代码】ApiDemos中摘录的部分控件效果图
- android异常:res\layout\activity_printFile.xml: Invalid file name: must contain only [a-z0-9_.]
- 生成最优归并树