AC back function on BISO
来源:互联网 发布:合众思壮任我游gps软件 编辑:程序博客网 时间:2024/05/21 22:53
AC back function(外部断电的情况,电源恢复时的系统状态选择)
一、Where to find the function;
BIOS-> Power Management Setup -> ACBack Function
二、How to access BIOS
Access BIOS Setup Utility Menus
1. Power-on or power-cycle the server.
2. To enter the BIOS Setup Utility, do the following:
a. Wait for the last line of the screen output to change toInitializingUSB Controllers..Done
This will take several seconds.
b. When Done appears, immediately press the F2 key.
The BIOS Setup Utility dialog appears
三、 Which option should be selected;
Please use the following BIOS parameter, and set to 'Poweroff'.
BIOS> Chipset > South Bridge ChipsetConfiguration > Restore on AC/Power Loss
一、Where to find the function;
BIOS-> Power Management Setup -> ACBack Function
二、How to access BIOS
Access BIOS Setup Utility Menus
1. Power-on or power-cycle the server.
2. To enter the BIOS Setup Utility, do the following:
a. Wait for the last line of the screen output to change toInitializingUSB
b. When Done appears, immediately press the F2 key.
三、
- soft-off 断电後即在关机状态,需按电源键才能重新被动系统。(预设值)
- full-on 电源回复时,立刻启动系统。
- memory 当电源回复时,恢复至系统断电前的状态。
Please use the following BIOS parameter, and set to 'Poweroff'.
BIOS> Chipset > South Bridge ChipsetConfiguration > Restore on AC/Power Loss
- AC back function on BISO
- call back function
- call back function
- Call back function
- back on line
- BACK ON TRACK
- Java 基础 - Call Back Function
- Call Back Function C++ Sample
- 做出自己的back trace function
- biso efi uefi
- export function on ffmpeg
- Looking back on the Spanish War
- 轻重缓急 put on the back burner
- A slap on the back 祝贺一下
- How to customize back button on UINavigationBar
- Custom action on Back Button UINavigationController
- Back to my blog on CSDN
- $(window).on("load",function(){}和$(function(){})区别
- How to collect explorer
- J2EE后端架构师岗位要求
- How to collect ilom Snapshot via Web GUI
- tar命令使用
- What data needed to be collected for HW issue investigation
- AC back function on BISO
- How to reset the ILOM root password back to the default 'changeme' using ipmitool
- How to identify the location of DIMM or CPU
- build javascript v8 engine on ubuntu
- How to clear COMS
- 未将服务器‘XXX’ 配置为用于 RPC
- How to run VTS by a bootable VTS CD (Sun fire X4600)
- 关注聊天本身,而不是聊天话题很
- ts开源项目