30 Useful Linux Commands for System Administrators【很基础的命令】

In this article we are going to review some of the useful and frequently used Linux or Unixcommands for Linux System Administrators that are used in their daily life. This is not a complete but it’s a compact list of commands to refer when needed. Let us start one by one how we can use those commands with examples.

1. Uptime Command

In Linux uptime command shows since how long your system is running and the number of users are currently logged in and also displays load average for 1,5 and 15 minutes intervals.

# uptime08:16:26 up 22 min,  1 user,  load average: 0.00, 0.03, 0.22

Check Uptime Version

Uptime command don’t have other options other than uptime and version. It gives information only in hours:mins if it less than 1 day.

[tecmint@tecmint ~]$ uptime -Vprocps version 3.2.8

2. W Command

It will displays users currently logged in and their process along-with shows load averages. also shows the login name, tty name, remote host, login time, idle time, JCPU, PCPU, command and processes.

# w08:27:44 up 34 min,  1 user,  load average: 0.00, 0.00, 0.08USER     TTY      FROM              LOGIN@   IDLE   JCPU   PCPU WHATtecmint  pts/0    192.168.50.1     07:59    0.00s  0.29s  0.09s w

Available options

1. -h : displays no header entries.
2. -s : without JCPU and PCPU.
3. -f : Removes from field.
4. -V : (upper letter) – Shows versions.

3. Users Command

Users command displays currently logged in users. This command don’t have other parameters other than help and version.

# userstecmint

4. Who Command

who command simply return user name, date, time and host information. who command is similar to w command. Unlike w command who doesn’t print what users are doing. Lets illustrate and see the different between who and w commands.

# whotecmint  pts/0        2012-09-18 07:59 (192.168.50.1)

# w08:43:58 up 50 min,  1 user,  load average: 0.64, 0.18, 0.06USER     TTY      FROM              LOGIN@   IDLE   JCPU   PCPU WHATtecmint  pts/0    192.168.50.1     07:59    0.00s  0.43s  0.10s w

Who command Options

1. -b : Displays last system reboot date and time.
2. -r : Shows current runlet.
3. -a, –all : Displays all information in cumulatively.

5. Whoami Command

whoami command print the name of current user. You can also use “who am i” command to display the current user. If you are logged in as a root using sudo command “whoami” command return root as current user. Use “who am i” command if you want to know the exact user logged in.

# whoamitecmint

6. ls Command

ls command display list of files in human readable format.

# ls -ltotal 114dr-xr-xr-x.   2 root root  4096 Sep 18 08:46 bindr-xr-xr-x.   5 root root  1024 Sep  8 15:49 boot

Sort file as per last modified time.

# ls -ltrtotal 40-rw-r--r--. 1 root root  6546 Sep 17 18:42 install.log.syslog-rw-r--r--. 1 root root 22435 Sep 17 18:45 install.log-rw-------. 1 root root  1003 Sep 17 18:45 anaconda-ks.cfg

For more examples of ls command, please check out our article on 15 Basic ‘ls’ Command Examples in Linux.

7. Crontab Command

List schedule jobs for current user with crontab command and -l option.

# crontab -l00 10 * * * /bin/ls >/ls.txt

Edit your crontab with -e option. In the below example will open schedule jobs in VI editor. Make a necessary changes and quit pressing :wq keys which saves the setting automatically.

# crontab -e

For more examples of Linux Cron Command, please read our earlier article on 11 Cron Scheduling Task Examples in Linux.

8. Less Command

less command allows quickly view file. You can page up and down. Press ‘q‘ to quit from less window.

# less install.logInstalling setup-2.8.14-10.el6.noarchwarning: setup-2.8.14-10.el6.noarch: Header V3 RSA/SHA256 Signature, key ID c105b9de: NOKEYInstalling filesystem-2.4.30-2.1.el6.i686Installing ca-certificates-2010.63-3.el6.noarchInstalling xml-common-0.6.3-32.el6.noarchInstalling tzdata-2010l-1.el6.noarchInstalling iso-codes-3.16-2.el6.noarch

9. More Command

more command allows quickly view file and shows details in percentage. You can page up and down. Press ‘q‘ to quit out from more window.

# more install.logInstalling setup-2.8.14-10.el6.noarchwarning: setup-2.8.14-10.el6.noarch: Header V3 RSA/SHA256 Signature, key ID c105b9de: NOKEYInstalling filesystem-2.4.30-2.1.el6.i686Installing ca-certificates-2010.63-3.el6.noarchInstalling xml-common-0.6.3-32.el6.noarchInstalling tzdata-2010l-1.el6.noarchInstalling iso-codes-3.16-2.el6.noarch--More--(10%)

10. CP Command

Copy file from source to destination preserving same mode.

# cp -p fileA fileB

You will be prompted before overwrite to file.

# cp -i fileA fileB

11. MV Command

Rename fileA to fileB. -i options prompt before overwrite. Ask for confirmation if exist already.

# mv -i fileA fileB

12. Cat Command

cat command used to view multiple file at the same time.

# cat fileA fileB

You combine more and less command with cat command to view file contain if that doesn’t fit in single screen / page.

# cat install.log | less# cat install.log | more

For more examples of Linux cat command read our article on 13 Basic Cat Command Examples in Linux.

13. Cd command (change directory)

with cd command (change directory) it will goes to fileA directory.

# cd /fileA

14. pwd command (print working directory)

pwd command return with present working directory.

# pwd/root

15. Sort command

Sorting lines of text files in ascending order. with -r options will sort in descending order.

#sort fileA.txt#sort -r fileA.txt

16. VI Command

Vi is a most popular text editor available most of the UNIX-like OS. Below examples open file in read only with -R option. Press ‘:q‘ to quit from vi window.

# vi -R /etc/shadows

17. SSH Command (Secure Shell)

SSH command is used to login into remote host. For example the below ssh command will connect to remote host (192.168.50.2) using user as narad.

# ssh narad@192.168.50.2

To check the version of ssh use option -V (uppercase) shows version of ssh.

# ssh -VOpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010

18. Ftp or sftp Command

ftp or sftp command is used to connect to remote ftp host. ftp is (file transfer protocol) and sftp is (secure file transfer protocol). For example the below commands will connect to ftp host (192.168.50.2).

# ftp 192.168.50.2# sftp 192.168.50.2

Putting multiple files in remote host with mput similarly we can do mget to download multiple files from remote host.

# ftp > mput *.txt# ftp > mget *.txt

19. Service Command

Service command call script located at /etc/init.d/ directory and execute the script. There are two ways to start the any service. For example we start the service called httpdwith service command.

# service httpd startOR# /etc/init.d/httpd start

20. Free command

Free command shows free, total and swap memory information in bytes.

# free             total       used       free     shared    buffers     cachedMem:       1030800     735944     294856          0      51648     547696-/+ buffers/cache:     136600     894200Swap:      2064376          0    2064376

Free with -t options shows total memory used and available to use in bytes.

# free -t             total       used       free     shared    buffers     cachedMem:       1030800     736096     294704          0      51720     547704-/+ buffers/cache:     136672     894128Swap:      2064376          0    2064376Total:     3095176     736096    2359080

21. Top Command

top command displays processor activity of your system and also displays tasks managed by kernel in real-time. It’ll show processor and memory are being used. Use top command with‘u‘ option this will display specific User process details as shown below. Press ‘O‘ (uppercase letter) to sort as per desired by you. Press ‘q‘ to quit from top screen.

# top -u tecminttop - 11:13:11 up  3:19,  2 users,  load average: 0.00, 0.00, 0.00Tasks: 116 total,   1 running, 115 sleeping,   0 stopped,   0 zombieCpu(s):  0.0%us,  0.3%sy,  0.0%ni, 99.7%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%stMem:   1030800k total,   736188k used,   294612k free,    51760k buffersSwap:  2064376k total,        0k used,  2064376k free,   547704k cachedPID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND1889 tecmint   20   0 11468 1648  920 S  0.0  0.2   0:00.59 sshd1890 tecmint   20   0  5124 1668 1416 S  0.0  0.2   0:00.44 bash6698 tecmint   20   0 11600 1668  924 S  0.0  0.2   0:01.19 sshd6699 tecmint   20   0  5124 1596 1352 S  0.0  0.2   0:00.11 bash

For more about top command we’ve already compiled a list of 12 TOP Command Examples in Linux.

22. Tar Command

tar command is used to compress files and folders in Linux. For example the below command will create a archive for /home directory with file name as archive-name.tar.

# tar -cvf archive-name.tar /home

To extract tar archive file use the option as follows.

# tar -xvf archive-name.tar

To understand more about tar command we’ve created a complete how-to guide on tar command at 18 Tar Command Examples in Linux.

23. Grep Command

grep search for a given string in a file. Only tecmint user displays from /etc/passwd file. we can use -i option for ignoring case sensitive.

# grep tecmint /etc/passwdtecmint:x:500:500::/home/tecmint:/bin/bash

24. Find Command

Find command used to search files, strings and directories. The below example of find command search tecmint word in ‘/‘ partition and return the output.

# find / -name tecmint/var/spool/mail/tecmint/home/tecmint/root/home/tecmint

For complete guide on Linux find command examples fount at 35 Practical Examples of Linux Find Command.

25. lsof Command

lsof mean List of all open files. Below lsof command list of all opened files by user tecmint.

# lsof -u tecmintCOMMAND  PID    USER   FD   TYPE     DEVICE SIZE/OFF   NODE NAMEsshd    1889 tecmint  cwd    DIR      253,0     4096      2 /sshd    1889 tecmint  txt    REG      253,0   532336 298069 /usr/sbin/sshdsshd    1889 tecmint  DEL    REG      253,0          412940 /lib/libcom_err.so.2.1sshd    1889 tecmint  DEL    REG      253,0          393156 /lib/ld-2.12.sosshd    1889 tecmint  DEL    REG      253,0          298643 /usr/lib/libcrypto.so.1.0.0sshd    1889 tecmint  DEL    REG      253,0          393173 /lib/libnsl-2.12.sosshd    1889 tecmint  DEL    REG      253,0          412937 /lib/libkrb5support.so.0.1sshd    1889 tecmint  DEL    REG      253,0          412961 /lib/libplc4.so

For more lsof command examples visit 10 lsof Command Examples in Linux.

26. last command

With last command we can watch user’s activity in the system. This command can execute normal user also. It will display complete user’s info like terminal, time, date, system reboot or boot and kernel version. Useful command to troubleshoot.

# lasttecmint  pts/1        192.168.50.1     Tue Sep 18 08:50   still logged intecmint  pts/0        192.168.50.1     Tue Sep 18 07:59   still logged inreboot   system boot  2.6.32-279.el6.i Tue Sep 18 07:54 - 11:38  (03:43)root     pts/1        192.168.50.1     Sun Sep 16 10:40 - down   (03:53)root     pts/0        :0.0             Sun Sep 16 10:36 - 13:09  (02:32)root     tty1         :0               Sun Sep 16 10:07 - down   (04:26)reboot   system boot  2.6.32-279.el6.i Sun Sep 16 09:57 - 14:33  (04:35)narad    pts/2        192.168.50.1     Thu Sep 13 08:07 - down   (01:15)

You can use last with username to know for specific user’s activity as shown below.

# last tecminttecmint  pts/1        192.168.50.1     Tue Sep 18 08:50   still logged intecmint  pts/0        192.168.50.1     Tue Sep 18 07:59   still logged intecmint  pts/1        192.168.50.1     Thu Sep 13 08:07 - down   (01:15)tecmint  pts/4        192.168.50.1     Wed Sep 12 10:12 - 12:29  (02:17)

27. ps command

ps command displays about processes running in the system. Below example show initprocess only.

# ps -ef | grep initroot         1     0  0 07:53 ?        00:00:04 /sbin/initroot      7508  6825  0 11:48 pts/1    00:00:00 grep init

28. kill command

Use kill command to terminate process. First find process id with ps command as shown below and kill process with kill -9 command.

# ps -ef | grep initroot         1     0  0 07:53 ?        00:00:04 /sbin/initroot      7508  6825  0 11:48 pts/1    00:00:00 grep init# kill- 9 7508

29. rm command

rm command used to remove or delete a file without prompting for confirmation.

# rm filename

Using -i option to get confirmation before removing it. Using options ‘-r‘ and ‘-f‘ will remove the file forcefully without confirmation.

# rm -i test.txtrm: remove regular file `test.txt'?

30. mkdir command example.

mkdir command is used to create directories under Linux.

# mkdir directoryname

This is a handy day to day useable basic commands in Linux / Unix-like operating system. Kindly share through our comment box if we missed out.