Smart Client Software Factory View之间如何通信

来源:互联网 发布:快盘关闭 数据如何处理 编辑:程序博客网 时间:2024/05/15 03:22

有了前两篇关于事件如何发布,订阅,现在就有了做View之间通信的基础。

下面做一个小例子,点左边View中的按钮,随机改变右边的View的背景色。

如下图,我们在shell 工程下添加两个View,一个为LeftView,一个为RightView,添加时选择建立单独的文件夹。


这个Shell里面有两个Workspace,一个LeftWorkspace,一个RightWorkspace,我现在把LeftView显示到LeftWorkspace,RightView显示到RightWorkspace


题外话:

这个把View加入到Workspace的任务是由ModuleController来完成的,这个类可以自己写,但必须继承WorkItemController 类,也可以直接修改框架自动生成的ModuleController类。但不管怎样也好,调用的时候一定要调对应的ModuleController(不管是你自己创建的,还是框架自动生成的)

因为最终调用的地方是 Infrastructure.Module 工程下的 Module 类 ,其中调用的代码如下

        public override void Load()        {            base.Load();            ControlledWorkItem<ModuleController> workItem = _rootWorkItem.WorkItems.AddNew<ControlledWorkItem<ModuleController>>();            workItem.Controller.Run();        }
其中的ModuleController可以是框架自动生成的,也可以是你自己写的(但要注意带上正确的命名空间)

回到主线:

刚刚上面已经添加了两个View,现在把它们加到Workspace中去 

然后需要修改Infrastructure.Module 工程中的 ModuleController 类 ,由于LeftView和RightView 并不在 Infrastructure.Module 工程中,而是在Shell 中,那么需要在 Infrastructure.Module 中对Shell 工程进行引用 ,这样 ModuleController 中才可以操作 LeftView和RightView


引用完毕之后,我们修改 nfrastructure.Module 工程中的 ModuleController 类

        private void AddViews()        {            //TODO: create the Module views, add them to the WorkItem and show them in             //a Workspace.             var leftView = ShowViewInWorkspace<LeftView>(WorkspaceNames.LeftWorkspace);            var rightView = ShowViewInWorkspace<RightView>(WorkspaceNames.RightWorkspace);        }
这样这两个View就加入到Workspace中了。

然后,接下来,我们要定义事件名称。在 Infrastructure.Interface 工程中的Constants文件夹下,找到EventTopicNames.cs 加入以下代码

public const string ChangeColor = "ChangeColor";

下一步,我们给LeftView 发布一个事件

右键 LeftViewPresenter.cs 按照前两篇文章的方法加入要发布的事件 ChangeColor

        [EventPublication(EventTopicNames.ChangeColor, PublicationScope.Global)]        public event EventHandler<EventArgs> ChangeColor;
再定义了一个方法,这个方法随机产生一个颜色,并触发 ChangeColor 事件 

        public void ChangeViewColor()        {            Random random = new Random();            int r = random.Next(256);            int g = random.Next(256);            int b = random.Next(256);            System.Drawing.Color color = System.Drawing.Color.FromArgb(r, g, b);            if (ChangeColor != null)            {                ChangeColor(this, new EventArgs<System.Drawing.Color>(color));            }        }

之后我们在LeftView中放上一个按钮,起名叫changeColorButton ,设置Text 为 Change Color


双击按钮,修改按钮的事件代码(LeftView.cs中)

        private void changeColorButton_Click(object sender, EventArgs e)        {            _presenter.ChangeViewColor();        }
这里调用了之前在Preserter中定义的ChangeViewColor 方法(方法中又触发了ChangeColor 事件 )。(View的按钮事件中并没有处理任何业务逻辑,所有的业务逻辑都应该放在Presenter中)

接下来的工作就是要修改RightView文件夹下的类了,
所先我们修改IRightView.cs 文件(在Presenter中,不直接调用View中的方法,而是调用IView中的)

namespace ViewComunicate.Infrastructure.Shell{    public interface IRightView    {        void ChangeColor(System.Drawing.Color color);    }}
然后修改RightView.cs来实现这个接口

        public void ChangeColor(System.Drawing.Color color)        {            this.BackColor = color;        }
最后我们要在Present 中订阅这个事件,然后在事件中调用ChangeColor这个方法

修改RightViewPresenter.cs

        [EventSubscription(EventTopicNames.ChangeColor, ThreadOption.UserInterface)]        public void OnChangeColor(object sender, EventArgs<System.Drawing.Color> e)        {            //TODO: Add your code here            View.ChangeColor(e.Data);        }
到这里,代码工作就已经完成了,下面是效果



原创粉丝点击