android HAL层驱动对接实例
来源:互联网 发布:淘宝优惠券生成淘口令 编辑:程序博客网 时间:2024/05/21 07:15
我们将通过设备文件/dev/hello来连接硬件抽象层模块和Linux内核驱动程序模块。
二. 进入到在hardware/libhardware/include/hardware目录,新建hello.h文件:
USER-NAME@MACHINE-NAME:~/Android$ cd hardware/libhardware/include/hardware
USER-NAME@MACHINE-NAME:~/Android/hardware/libhardware/include/hardware$ vi hello.h
hello.h文件的内容如下:
- #ifndef ANDROID_HELLO_INTERFACE_H
- #define ANDROID_HELLO_INTERFACE_H
- #include <hardware/hardware.h>
- __BEGIN_DECLS
- /*定义模块ID*/
- #define HELLO_HARDWARE_MODULE_ID "hello"
- /*硬件模块结构体*/
- struct hello_module_t {
- struct hw_module_t common;
- };
- /*硬件接口结构体*/
- struct hello_device_t {
- struct hw_device_t common;
- int fd;
- int (*set_val)(struct hello_device_t* dev, int val);
- int (*get_val)(struct hello_device_t* dev, int* val);
- };
- __END_DECLS
- #endif
这里按照Android硬件抽象层规范的要求,分别定义模块ID、模块结构体以及硬件接口结构体。在硬件接口结构体中,fd表示设备文件描述符,对应我们将要处理的设备文件"/dev/hello",set_val和get_val为该HAL对上提供的函数接口。
三. 进入到hardware/libhardware/modules目录,新建hello目录,并添加hello.c文件。 hello.c的内容较多,我们分段来看。
首先是包含相关头文件和定义相关结构:
- #define LOG_TAG "HelloStub"
- #include <hardware/hardware.h>
- #include <hardware/hello.h>
- #include <fcntl.h>
- #include <errno.h>
- #include <cutils/log.h>
- #include <cutils/atomic.h>
- #define DEVICE_NAME "/dev/hello"
- #define MODULE_NAME "Hello"
- #define MODULE_AUTHOR "shyluo@gmail.com"
- /*设备打开和关闭接口*/
- static int hello_device_open(const struct hw_module_t* module, const char* name, struct hw_device_t** device);
- static int hello_device_close(struct hw_device_t* device);
- /*设备访问接口*/
- static int hello_set_val(struct hello_device_t* dev, int val);
- static int hello_get_val(struct hello_device_t* dev, int* val);
- /*模块方法表*/
- static struct hw_module_methods_t hello_module_methods = {
- open: hello_device_open
- };
- /*模块实例变量*/
- struct hello_module_t HAL_MODULE_INFO_SYM = {
- common: {
- tag: HARDWARE_MODULE_TAG,
- version_major: 1,
- version_minor: 0,
- id: HELLO_HARDWARE_MODULE_ID,
- name: MODULE_NAME,
- author: MODULE_AUTHOR,
- methods: &hello_module_methods,
- }
- };
这里,实例变量名必须为HAL_MODULE_INFO_SYM,tag也必须为HARDWARE_MODULE_TAG,这是Android硬件抽象层规范规定的。
定义hello_device_open函数:
- static int hello_device_open(const struct hw_module_t* module, const char* name, struct hw_device_t** device) {
- struct hello_device_t* dev;dev = (struct hello_device_t*)malloc(sizeof(struct hello_device_t));
- if(!dev) {
- LOGE("Hello Stub: failed to alloc space");
- return -EFAULT;
- }
- memset(dev, 0, sizeof(struct hello_device_t));
- dev->common.tag = HARDWARE_DEVICE_TAG;
- dev->common.version = 0;
- dev->common.module = (hw_module_t*)module;
- dev->common.close = hello_device_close;
- dev->set_val = hello_set_val;dev->get_val = hello_get_val;
- if((dev->fd = open(DEVICE_NAME, O_RDWR)) == -1) {
- LOGE("Hello Stub: failed to open /dev/hello -- %s.", strerror(errno));free(dev);
- return -EFAULT;
- }
- *device = &(dev->common);
- LOGI("Hello Stub: open /dev/hello successfully.");
- return 0;
- }
DEVICE_NAME定义为"/dev/hello"。由于设备文件是在内核驱动里面通过device_create创建的,而device_create创建的设备文件默认只有root用户可读写,而hello_device_open一般是由上层APP来调用的,这些APP一般不具有root权限,这时候就导致打开设备文件失败:
- static int hello_device_close(struct hw_device_t* device) {
- struct hello_device_t* hello_device = (struct hello_device_t*)device;
- if(hello_device) {
- close(hello_device->fd);
- free(hello_device);
- }
- return 0;
- }
- static int hello_set_val(struct hello_device_t* dev, int val) {
- LOGI("Hello Stub: set value %d to device.", val);
- write(dev->fd, &val, sizeof(val));
- return 0;
- }
- static int hello_get_val(struct hello_device_t* dev, int* val) {
- if(!val) {
- LOGE("Hello Stub: error val pointer");
- return -EFAULT;
- }
- read(dev->fd, val, sizeof(*val));
- LOGI("Hello Stub: get value %d from device", *val);
- return 0;
- }
- android HAL层驱动对接实例
- android JNI对接HAL层列子
- Android架构实例分析之编写hello驱动的HAL层代码
- Android HAL层与Linux Kernel层驱动开发简介
- s5p4418 Android 4.4.2 驱动层 HAL层 服务层 应用层 开发流程记录(一 硬件驱动层)
- Android HAL层基础
- Android HAL层HAL_MODULE_INFO
- android HAL层
- Android HAL层浅析
- Android HAL层 2
- Android HAL层
- Android HAL层解析
- Android HAL层分析
- android HAL层代码
- Android HAL驱动开发
- s5p4418 Android 4.4.2 驱动层 HAL层 服务层 应用层 开发流程记录(二 硬件抽象层HAL)
- s5p4418 Android 4.4.2 驱动层 HAL层 服务层 应用层 开发流程记录(二 硬件抽象层HAL 第二种 ioctl操作方法)
- Android应用层到Framework到HAL再到驱动层的整个流程分析
- iOS7中UITableView的变化
- 20131013百度北京深度学习算法研发工程师笔试题
- 我要在5天内看完这本书《Flex4 权威指南》
- Java中遍历文件夹的2种方法
- retain cycle
- android HAL层驱动对接实例
- 给列表设颜色选择器
- 函数strstr()
- baseline学习1
- 23岁生日,写给自己
- Zend Debugger的安装
- ADB不能使用
- 英语词汇
- Spring整合Hibernate的步骤