allegro 如何 敷铜(铺铜),并去掉敷铜岛
来源:互联网 发布:mac os 安装双系统 编辑:程序博客网 时间:2024/06/06 01:50
负片
setup —>Drawing Options, 在Thermal pads 和Filled Pads前面画勾
Add shape 画一个封闭区域
Edit —>Change Net (Name)指定网络
shape Fill 敷铜完成
正片
Add shape 画一个封闭区域选择Crosshatch或Solid Fill
Edit —>Change Net (Name)指定网络
Shape —>Parameters参数设置
Void —>Auto自动避让
shape Fill 敷铜完成
注意:金属化孔要事先做好flash symbol!
铜区的编辑(shape的修改)
Edit —> shape
Edit —> Vertex 或Edit —> Boundary来改变shape的外部形状
shape —> Fill
---------------------------------------------------------------------------------------------------------
一、先设置铺铜参数:
Shape->Global Dynamic Params...
1、Shape fill取缺省参数
2、Void controls:
Artwork format->Gerber 6x00
Create pin voids->in line (平滑pin与pin之间因敷铜产生的的尖角)
3、Clearance中输入网络间距:如25.00
4、Thermal relief connects中设定铺铜和同名网络的连接方式
二、Shape->Polygon/Rectangular/Circular,
然后在Options选择要铺铜的层(如Etch/Top),
Shape Fill 为Dynamic copper
Assign net name 中指定铺铜要连接的网络(如GND),
三、铺铜完毕后,如果要删除死铜,
则:Shape->Delete Islands,
四、如果要挖掉部分铺铜,
则:Shape->Manul void->...
-------------------------------------------------------------------------------------
敷铜 shape add rect->option->assign net name
去掉敷铜岛 isand_delete->option->delete all on layer
setup —>Drawing Options, 在Thermal pads 和Filled Pads前面画勾
Add shape 画一个封闭区域
Edit —>Change Net (Name)指定网络
shape Fill 敷铜完成
正片
Add shape 画一个封闭区域选择Crosshatch或Solid Fill
Edit —>Change Net (Name)指定网络
Shape —>Parameters参数设置
Void —>Auto自动避让
shape Fill 敷铜完成
注意:金属化孔要事先做好flash symbol!
铜区的编辑(shape的修改)
Edit —> shape
Edit —> Vertex 或Edit —> Boundary来改变shape的外部形状
shape —> Fill
---------------------------------------------------------------------------------------------------------
一、先设置铺铜参数:
Shape->Global Dynamic Params...
1、Shape fill取缺省参数
2、Void controls:
Artwork format->Gerber 6x00
Create pin voids->in line (平滑pin与pin之间因敷铜产生的的尖角)
3、Clearance中输入网络间距:如25.00
4、Thermal relief connects中设定铺铜和同名网络的连接方式
二、Shape->Polygon/Rectangular/Circular,
然后在Options选择要铺铜的层(如Etch/Top),
Shape Fill 为Dynamic copper
Assign net name 中指定铺铜要连接的网络(如GND),
三、铺铜完毕后,如果要删除死铜,
则:Shape->Delete Islands,
四、如果要挖掉部分铺铜,
则:Shape->Manul void->...
-------------------------------------------------------------------------------------
敷铜 shape add rect->option->assign net name
去掉敷铜岛 isand_delete->option->delete all on layer
- allegro 如何 敷铜(铺铜),并去掉敷铜岛
- allegro 如何 敷铜(铺铜),并去掉敷铜岛
- Allegro 铺铜
- ActionBarActivity如何去掉TitleBar并全屏显示
- allegro的快捷键,如何设置allegro 快捷键
- allegro中如何导出DXF
- 如何将dxf导入Allegro
- 如何设置allegro的快捷键
- 如何设置allegro的快捷键
- 如何设置allegro的快捷键
- allegro如何打开Gerber文件
- allegro学习之如何开窗
- yii2 如何使用 PATH_INFO 模式 并去掉 index.php
- 20.allegro.铺铜
- allegro
- allegro 如何设置route keepin,package keepin
- 在Allegro中如何进行设计重用
- Allegro如何生成光绘文件(转贴)
- ZOJ Flower (二分+网络流sap 算法)
- allegro 修改引脚,焊盘的网络标号
- 黑马程序员_基础与加强上
- 四十条测试你是不是合格的PHP程序员
- C++运行时类型识别(RTTI)
- allegro 如何 敷铜(铺铜),并去掉敷铜岛
- 大数据时代
- 给父母的10个网络社交的建议
- C#中Windows Media Player控件使用实例|方法
- HDOJ 4751 黑白染色问题
- allgro GND焊盘到敷铜之间的线宽
- Android 触摸屏手势识别
- jquery+PHP实现无刷新页面分页
- allegro 修改引脚号