函数名: harderr功 能: 建立一个硬件错误处理程序用 法: void harderr(int (*fptr)());程序例:/*This program will trap disk errors and promptthe user for action. Try running it with nodisk in drive A: to invoke its functions.*/#include <stdio.h>#include <conio.h>#include <dos.h>#define IGNORE 0#define RETRY 1#define ABORT 2int buf[500];/*define the error messages for trapping disk problems*/static char *err_msg[] = { "write protect", "unknown unit", "drive not ready", "unknown command", "data error (CRC)", "bad request", "seek error", "unknown media type", "sector not found", "printer out of paper", "write fault", "read fault", "general failure", "reserved", "reserved", "invalid disk change"};error_win(char *msg){ int retval; cputs(msg);/*prompt for user to press a key to abort, retry, ignore*/ while(1) { retval= getch(); if (retval == 'a' || retval == 'A') { retval = ABORT; break; } if (retval == 'r' || retval == 'R') { retval = RETRY; break; } if (retval == 'i' || retval == 'I') { retval = IGNORE; break; } } return(retval);}/*pragma warn -par reduces warnings which occurdue to the non use of the parameters errval,bp and si to the handler.*/#pragma warn -parint handler(int errval,int ax,int bp,int si){ static char msg[80]; unsigned di; int drive; int errorno; di= _DI;/*if this is not a disk error then it wasanother device having trouble*/ if (ax < 0) { /* report the error */ error_win("Device error"); /* and return to the program directly requesting abort */ hardretn(ABORT); }/* otherwise it was a disk error */ drive = ax & 0x00FF; errorno = di & 0x00FF;/* report which error it was */ sprintf(msg, "Error: %s on drive %c\r\nA)bort, R)etry, I)gnore: ", err_msg[errorno], 'A' + drive);/*return to the program via dos interrupt 0x23 with abort, retry,or ignore as input by the user.*/ hardresume(error_win(msg)); return ABORT;}#pragma warn +parint main(void){/*install our handler on the hardware problem interrupt*/ harderr(handler); clrscr(); printf("Make sure there is no disk in drive A:\n"); printf("Press any key ....\n"); getch(); printf("Trying to access drive A:\n"); printf("fopen returned %p\n",fopen("A:temp.dat", "w")); return 0;}函数名: hardresume功 能: 硬件错误处理函数用 法: void hardresume(int rescode);程序例:/* This program will trap disk errors and prompt the user for action. *//* Try running it with no disk in drive A: to invoke its functions */#include <stdio.h>#include <conio.h>#include <dos.h>#define IGNORE 0#define RETRY 1#define ABORT 2int buf[500];/* define the error messages for trapping disk problems */static char *err_msg[] = { "write protect", "unknown unit", "drive not ready", "unknown command", "data error (CRC)", "bad request", "seek error", "unknown media type", "sector not found", "printer out of paper", "write fault", "read fault", "general failure", "reserved", "reserved", "invalid disk change"};error_win(char *msg){ int retval; cputs(msg);/* prompt for user to press a key to abort, retry, ignore */ while(1) { retval= getch(); if (retval == 'a' || retval == 'A') { retval = ABORT; break; } if (retval == 'r' || retval == 'R') { retval = RETRY; break; } if (retval == 'i' || retval == 'I') { retval = IGNORE; break; } } return(retval);}/* pragma warn -par reduces warnings which occur due to the non use *//* of the parameters errval, bp and si to the handler. */#pragma warn -parint handler(int errval,int ax,int bp,int si){ static char msg[80]; unsigned di; int drive; int errorno; di= _DI;/* if this is not a disk error then it was another device having trouble */ if (ax < 0) { /* report the error */ error_win("Device error"); /* and return to the program directly requesting abort */ hardretn(ABORT); }/* otherwise it was a disk error */ drive = ax & 0x00FF; errorno = di & 0x00FF;/* report which error it was */ sprintf(msg, "Error: %s on drive %c\r\nA)bort, R)etry, I)gnore: ", err_msg[errorno], 'A' + drive);/* return to the program via dos interrupt 0x23 with abort, retry *//* or ignore as input by the user. */ hardresume(error_win(msg)); return ABORT;}#pragma warn +parint main(void){/* install our handler on the hardware problem interrupt */ harderr(handler); clrscr(); printf("Make sure there is no disk in drive A:\n"); printf("Press any key ....\n"); getch(); printf("Trying to access drive A:\n"); printf("fopen returned %p\n",fopen("A:temp.dat", "w")); return 0;}函数名: highvideo功 能: 选择高亮度文本字符用 法: void highvideo(void);程序例:#include <conio.h>int main(void){ clrscr(); lowvideo(); cprintf("Low Intensity text\r\n"); highvideo(); gotoxy(1,2); cprintf("High Intensity Text\r\n"); return 0;}函数名: hypot功 能: 计算直角三角形的斜边长用 法: double hypot(double x, double y);程序例:#include <stdio.h>#include <math.h>int main(void){ double result; double x = 3.0; double y = 4.0; result = hypot(x, y); printf("The hypotenuse is: %lf\n", result); return 0;}
