Gearman分布式任务处理系统（八）开发讲解

这篇重点介绍C-Lib库及client和worker的开发，以0.14版libgearman for C来讲解

Client API

client初始化&析构

gearman_client_st *gearman_client_create(gearman_client_st *client)

void gearman_client_free(gearman_client_st *client)

gearman_return_t gearman_client_add_server(gearman_client_st *client, const char *host, in_port_t port);

gearman_return_t gearman_client_add_servers(gearman_client_st *client, const char *servers); (一次添加多个gearman job-server)

同步操作

void * gearman_client_do(gearman_client_st *client, const char *function_name, const char *unique, const void *workload, size_t workload_size, size_t *result_size, gearman_return_t *ret_ptr);

其中：

i. unique: 的作用是client添加job给worker的时候的一个唯一标识，可选，默认是NULL

ii. workload & workload_size指代执行任务的详细参数及其大小

iii. result_size [out]，指代返回数据的大小

iv. ret_ptr [out], 指代gearman的返回status，以下是官方对于返回status的一些说明：

In the case of GEARMAN_WORK_DATA, GEARMAN_WORK_WARNING, or GEARMAN_WORK_STATUS, the caller should take any actions to handle the event and then call this function again. This may happen multiple times until a GEARMAN_WORK_ERROR, GEARMAN_WORK_FAIL, or GEARMAN_SUCCESS (work complete) is returned. For GEARMAN_WORK_DATA or GEARMAN_WORK_WARNING, the result_size will be set to the intermediate data chunk being returned and an allocated data buffer will be returned. For GEARMAN_WORK_STATUS, the caller can use gearman_client_do_status() to get the current tasks status.

总而言之，只有GEARMAN_WORK_ERROR/GEARMAN_WORK_FAIL/GEARMAN_SUCCESS才是三个最终的返回结果，其他的只是临时中间结果，需要进一步调用接受结果的函数(感觉中间结果只有在异步调用过程中才会出现)

v. 输出是返回数据的起始地址，一旦用户用完之后，必须free，否则会出现内存泄露。

void gearman_set_timeout(gearman_universal_st *gearman, int timeout);

设置gearman_client_do多长时调用无返回则超时时间

异步callback操作

Gearman通过使用gearman_client_add_task()来望gearman_client_st中添加task，通过gearman_client_set_created_fn() / gearman_client_set_complete_fn()等来注册callback function，通过gearman_client_run_tasks()来运行gearman_client_st中的task。

异步background操作

系统在background运行job，client定期获得job运行结果，如果成功则返回，反之则继续等待。

gearman_return_t gearman_client_do_background(gearman_client_st *client, const char *function_name, const char *unique, const void *workload, size_t workload_size, char *job_handle);

i. job_handle [out]: 一个job的标识符

ii. 输出：返回状态

* gearman_return_t gearman_client_job_status(gearman_client_st *client, gearman_job_handle_t job_handle, bool *is_known, bool * is_running, uint32_t *numerator, uint32_t *denominator);

* 用户获得在background执行的job的状态

i. is_known [out]: Optional parameter to store the known status in

ii. is_running [out]: Optional parameter to store the running status in

iii. numerator [out]: Optional parameter to store the numerator in

iv. denominator [out]: Optional parameter to store the denominator in

PS: 好像background操作不怎么好使，不知道如何通过获得background的运行结果，这个是我一直困惑的

gearman_client_st的一些属性

gearman_client_st一共有以下3种运行属性：

i. GEARMAN_CLIENT_NON_BLOCKING: client运行在non-blocking mode

ii. GEARMAN_CLIENT_FREE_TASKS: 在task执行完成之后，自动的释放task

iii. GEARMAN_CLIENT_UNBUFFERED_RESULT: Allow the client to read data in chunks rather than have the library buffer the entire data result and pass that back。

可以通过函数gearman_client_add_options() / gearman_client_remove_options() / gearman_client_has_option() 等进行属性添加/删除/判断等

Worker API

/**
 * Initialize a worker structure. Always check the return value even if passing
 * in a pre-allocated structure. Some other initialization may have failed. It
 * is not required to memset() a structure before providing it.
 *
 * @param[in] worker Caller allocated structure, or NULL to allocate one.
 * @return On success, a pointer to the (possibly allocated) structure. On
 *  failure this will be NULL.
 */
GEARMAN_API
gearman_worker_st *gearman_worker_create(gearman_worker_st *worker);


/**
 * Free resources used by a worker structure.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 */
GEARMAN_API
void gearman_worker_free(gearman_worker_st *worker);


/**
 * Add a job server to a worker. This goes into a list of servers that can be
 * used to run tasks. No socket I/O happens here, it is just added to a list.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param[in] host Hostname or IP address (IPv4 or IPv6) of the server to add.
 * @param[in] port Port of the server to add.
 * @return Standard gearman return value.
 */
GEARMAN_API
gearman_return_t gearman_worker_add_server(gearman_worker_st *worker,
                                           const char *host, in_port_t port);


/**
 * Add a list of job servers to a worker. The format for the server list is:
 * SERVER[:PORT][,SERVER[:PORT]]...
 * Some examples are:
 * 10.0.0.1,10.0.0.2,10.0.0.3
 * localhost LIBGEARMAN_BITFIELD234,jobserver2.domain.com:7003,10.0.0.3
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param[in] servers Server list described above.
 * @return Standard gearman return value.
 */
GEARMAN_API
gearman_return_t gearman_worker_add_servers(gearman_worker_st *worker,
                                            const char *servers);
                                            
/**
 * Register and add callback function for worker. To remove functions that have
 * been added, call gearman_worker_unregister() or
 * gearman_worker_unregister_all().
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param[in] function_name Function name to register.
 * @param[in] timeout Optional timeout (in seconds) that specifies the maximum
 *  time a job should. This is enforced on the job server. A value of 0 means
 *  an infinite time.
 * @param[in] function Function to run when there is a job ready.
 * @param[in] context Argument to pass into the callback function.
 * @return Standard gearman return value.
 */
GEARMAN_API
gearman_return_t gearman_worker_add_function(gearman_worker_st *worker,
                                             const char *function_name,
                                             uint32_t timeout,
                                             gearman_worker_fn *function,
                                             void *context);


/**
 * Wait for a job and call the appropriate callback function when it gets one.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @return Standard gearman return value.
 */
GEARMAN_API
gearman_return_t gearman_worker_work(gearman_worker_st *worker);

/**
 * See gearman_universal_set_timeout() for details.
 */
GEARMAN_API
void gearman_worker_set_timeout(gearman_worker_st *worker, int timeout);

开发实例

下面这个实例程序是，jfy_client发送test，jfy_worker返回test->result

/*  gearman client 测试程序  gcc -o jfy_client jfy_client.c -I/usr/local/gearman/include -L/usr/local/gearman/lib -lgearman  ./jfy_client "this is a test"*/#include <stdio.h>#include <stdlib.h>#include <string.h>#include <unistd.h>#include <libgearman/gearman.h>static void usage(char *name);int main(int argc, char *argv[]){  int i;  gearman_return_t ret;  gearman_client_st client;  char *result;  size_t result_size;  uint32_t numerator;  uint32_t denominator;  char *host = "localhost", *port = "4730";  if (gearman_client_create(&client) == NULL)  {    fprintf(stderr, "Memory allocation failure on client creation\n");    exit(1);  }  gearman_client_set_options(&client, GEARMAN_CLIENT_FREE_TASKS);  gearman_client_set_timeout(&client, 15000);  ret= gearman_client_add_server(&client, host, atoi(port));  if (ret != GEARMAN_SUCCESS)  {    fprintf(stderr, "%s\n", gearman_client_error(&client));    exit(1);  }  for (i=0;i<10;i++)  {    result= (char *)gearman_client_do(&client, "jfytest", NULL,                                      (void *)argv[1],                                      (size_t)strlen(argv[1]),                                      &result_size, &ret);    if (ret == GEARMAN_WORK_DATA)    {      printf("Data=%.*s\n", (int)result_size, result);      free(result);    }    else if (ret == GEARMAN_WORK_STATUS)    {      gearman_client_do_status(&client, &numerator, &denominator);      printf("Status: %u/%u\n", numerator, denominator);    }    else if (ret == GEARMAN_SUCCESS)    {      char result2[1024];      strncpy(result2, result, result_size);      result2[result_size] = 0;      printf("result_size=%d,result=%s=\n", (int)result_size, result2);      free(result);    }    else if (ret == GEARMAN_WORK_FAIL)      fprintf(stderr, "Work failed\n");    else if (ret == GEARMAN_TIMEOUT)    {      fprintf(stderr, "Work timeout\n");    } else {      fprintf(stderr, "%d,%s\n", gearman_client_errno(&client), gearman_client_error(&client));    }    printf("sleep 5s ...\n");    sleep(5);  }  gearman_client_free(&client);  return 0;}

/*  gearman worker 测试程序  gcc -o jfy_worker jfy_worker2.c -I/usr/local/gearman/include -L/usr/local/gearman/lib -lgearman  ./jfy_worker ./jfy_worker.tr*/#include <errno.h>#include <stdio.h>#include <stdlib.h>#include <string.h>#include <unistd.h>#include <libgearman/gearman.h>static void *jfytest(gearman_job_st *job, void *context, size_t *result_size,                     gearman_return_t *ret_ptr);int main(int argc, char *argv[]){  gearman_return_t ret;  gearman_worker_st worker;  char *host = "localhost", *port = "4730";  if (gearman_worker_create(&worker) == NULL)  {    printf("%s\n", gearman_worker_error(&worker));    exit(1);  }  ret= gearman_worker_add_server(&worker, host, atoi(port));  if (ret != GEARMAN_SUCCESS)  {    printf("%s\n", gearman_worker_error(&worker));    exit(1);  }  ret= gearman_worker_add_function(&worker, "jfytest", 0, jfytest, NULL);  if (ret != GEARMAN_SUCCESS)  {    printf("%s\n", gearman_worker_error(&worker));    exit(1);  }  printf("wait job ...\n");  while (1)  {    ret= gearman_worker_work(&worker);    if (ret != GEARMAN_SUCCESS)    {      printf("%s\n", gearman_worker_error(&worker));      break;    }  }  gearman_worker_free(&worker);  return 0;}static void *jfytest(gearman_job_st *job, void *context, size_t *result_size,                     gearman_return_t *ret_ptr){  const uint8_t *workload;  char *request,*result;  workload= gearman_job_workload(job);  *result_size= gearman_job_workload_size(job);  request= malloc(1024);  if (result == NULL)  {    printf("malloc request:%d\n", errno);    *ret_ptr= GEARMAN_WORK_FAIL;    return NULL;  }  snprintf((char *)request, *result_size+1, "%s", (char *)workload);  printf("job=%s,result_size=%d,request=%s\n", gearman_job_handle(job),*result_size,request);  result= malloc(1024);  if (result == NULL)  {    printf("malloc result:%d\n", errno);    *ret_ptr= GEARMAN_WORK_FAIL;    return NULL;  }  *ret_ptr= GEARMAN_SUCCESS;  sprintf((char *)result, "%s->result", (char *)request);  *result_size= strlen((char *)result);  printf("job=%s,result_size=%d,result=%s\n", gearman_job_handle(job),*result_size,result);  return result;}

下面的实例是PHP程序(PHP Gearman参考文档），客户端发送"hello!"

worker端是两个程序，一个是阻塞方式的，一个是非阻塞方式的

<?php/* * send "Hello!" */echo "Starting\n";# Create our client object.$gmclient= new GearmanClient();# Add default server (localhost).$gmclient->addServer();echo "Sending job\n";# Send reverse jobdo{  $result= $gmclient->do("reverse", "Hello!");  # Check for various return packets and errors.  switch($gmclient->returnCode())  {    case GEARMAN_WORK_DATA:      echo "Data: $result\n";      break;    case GEARMAN_WORK_STATUS:      list($numerator, $denominator)= $gmclient->doStatus();      echo "Status: $numerator/$denominator complete\n";      break;    case GEARMAN_SUCCESS:      break;    default:      echo "RET: " . $gmclient->returnCode() . "\n";      exit;  }}while($gmclient->returnCode() != GEARMAN_SUCCESS);echo "Success: $result\n";?>

<?php/* * 阻塞方式Worker，处理"Hello!"转换为"!olleH" */echo "Starting\n";# Create our worker object.$gmworker= new GearmanWorker();$gmworker->setTimeout(5000);# Add default server (localhost).$gmworker->addServer();# Register function "reverse" with the server. Change the worker function to# "reverse_fn_fast" for a faster worker with no output.$gmworker->addFunction("reverse", "reverse_fn");print "Waiting for job...\n";while($gmworker->work()){  if ($gmworker->returnCode() != GEARMAN_SUCCESS)  {    echo "return_code: " . $gmworker->returnCode() . "\n";    break;  }  echo "receve and proced a job!";}function reverse_fn($job){  echo "Received job: " . $job->handle() . "\n";  $workload= $job->workload();  $workload_size= $job->workloadSize();  echo "Workload: $workload ($workload_size)\n";  # This status loop is not needed, just showing how it works  for ($x= 0; $x < $workload_size; $x++)  {    echo "Sending status: $x/$workload_size complete\n";    /*    $job->sendStatus($x, $workload_size);    sleep(1);    */  }  $result= strrev($workload);  echo "Result: $result\n";  # Return what we want to send back to the client.  return $result;}# A much simpler and less verbose version of the above function would be:function reverse_fn_fast($job){  return strrev($job->workload());}?>

<?php/* * 非阻塞方式Worker，处理"Hello!"转换为"!olleH" */echo "Starting\n";# Create our worker object.$gmworker= new GearmanWorker();$gmworker->setTimeout(1000);$gmworker->addOptions(GEARMAN_WORKER_NON_BLOCKING); # Make the worker non-blocking# Add default server (localhost).$gmworker->addServer();# Register function "reverse" with the server. Change the worker function to# "reverse_fn_fast" for a faster worker with no output.$gmworker->addFunction("reverse", "reverse_fn");print "Waiting for job...\n";while ( ($ret = $gmworker->work()) || $gmworker->returnCode() == GEARMAN_IO_WAIT || $gmworker->returnCode() == GEARMAN_NO_JOBS) {  echo "return_code: " . $gmworker->returnCode() . "\n";  if ($gmworker->returnCode() == GEARMAN_SUCCESS) {    continue;  }  if ( !$gmworker->wait() ) {    echo "return_code: " . $gmworker->returnCode() . "\n";    if ($gmworker->returnCode() == GEARMAN_NO_ACTIVE_FDS) {      # We are not connected to any servers, so wait a bit before      # trying to reconnect. sleep(5);      continue;    }    break;  }}function reverse_fn($job){  echo "Received job: " . $job->handle() . "\n";  $workload= $job->workload();  $workload_size= $job->workloadSize();  echo "Workload: $workload ($workload_size)\n";  # This status loop is not needed, just showing how it works  for ($x= 0; $x < $workload_size; $x++)  {    echo "Sending status: $x/$workload_size complete\n";    /*    $job->sendStatus($x, $workload_size);    sleep(1);    */  }  $result= strrev($workload);  echo "Result: $result\n";  # Return what we want to send back to the client.  return $result;}# A much simpler and less verbose version of the above function would be:function reverse_fn_fast($job){  return strrev($job->workload());}?>