更新Linux网卡驱动

来源：互联网发布：香港2047知乎编辑：程序博客网时间：2024/04/27 04:20

我们是博通的网卡，查看博通网卡的驱动版本的命令：

[root@HT101-108 hongtu]# ethtool -i eth0

driver: bnx2

version: 1.7.9-1

firmware-version: 5.2.3 NCSI 2.0.11

bus-info: 0000:01:00.0

我们知道博通网卡的驱动文件名叫bnx2.ko。查找下bnx2.ko的位置

[root@HT101-108 hongtu]# find /lib/modules -name bnx2.ko

/lib/modules/2.6.18-128.el5PAE/kernel/drivers/net/bnx2.ko

查看驱动详细情况：

[root@HT101-108 hongtu]# modinfo /lib/modules/2.6.18-128.el5PAE/kernel/drivers/net/bnx2.ko

filename: /lib/modules/2.6.18-128.el5PAE/kernel/drivers/net/bnx2.ko

version: 1.7.9-1

license: GPL

description: Broadcom NetXtreme II BCM5706/5708/5709 Driver

author: Michael Chan <mchan@broadcom.com>

srcversion: 71574E8CA8E4B7882A0AC73

alias: pci:v000014E4d0000163Csv*sd*bc*sc*i*

alias: pci:v000014E4d0000163Bsv*sd*bc*sc*i*

alias: pci:v000014E4d0000163Asv*sd*bc*sc*i*

alias: pci:v000014E4d00001639sv*sd*bc*sc*i*

alias: pci:v000014E4d000016ACsv*sd*bc*sc*i*

alias: pci:v000014E4d000016AAsv*sd*bc*sc*i*

alias: pci:v000014E4d000016AAsv0000103Csd00003102bc*sc*i*

alias: pci:v000014E4d0000164Csv*sd*bc*sc*i*

alias: pci:v000014E4d0000164Asv*sd*bc*sc*i*

alias: pci:v000014E4d0000164Asv0000103Csd00003106bc*sc*i*

alias: pci:v000014E4d0000164Asv0000103Csd00003101bc*sc*i*

depends:

vermagic: 2.6.18-128.el5PAE SMP mod_unload 686 REGPARM 4KSTACKS gcc-4.1

parm: disable_msi:Disable Message Signaled Interrupt (MSI) (int)

module_sig: 883f3504949344a31b497468cdd12cf112eee10a08a117472662feb22461926e5d4dddc9b665bdaa0a0a57ea6f45d214f7d64dcd94c761479548fb795ff

version记录就是我们的网卡驱动版本，是1.7.9-1

----------------------------------------------------------------------------------------------------------------------------------------

更新网卡驱动：

一，源码RPM包安装方式：

[root@lab ~]# rpm -ivh netxtreme2-4.8.10-1.src.rpm 安装源码包

1:netxtreme2 ########################################### [100%]

2,[root@lab ~]# cd /usr/src/redhat/

[root@lab redhat]# ls

BUILD RPMS SOURCES SPECS SRPMS

[root@lab redhat]# rpmbuild -bb SPECS/netxtreme2.spec

在源码编译结束的时候会看到如下的提示

Wrote: /usr/src/redhat/RPMS/i386/netxtreme2-4.8.10-1.i386.rpm

Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.59603

+ umask 022

+ cd /usr/src/redhat/BUILD

+ cd netxtreme2-4.8.10

+ rm -rf /var/tmp/netxtreme2-buildroot /usr/src/redhat/BUILD/file.list.netxtreme2

+ exit 0 (如果返回值为1-255，就说明编译没有成功)

3,[root@lab redhat]# rpm -ivh RPMS/i386/netxtreme2-4.8.10-1.i386.rpm 安装编译之后生成的rpm包

Preparing... ########################################### [100%]

1:netxtreme2 ########################################### [100%]

[root@lab redhat]# lsmod |grep bnx2 安装后默认没有加载该模块，如果有则rmmod bnx2移除之前的。

[root@lab redhat]# modprobe bnx2 手动加载,modprober命令会去搜索/lib/modules/2.6.18-53.el5下边所有的包

[root@lab redhat]# lsmod |grep bnx2 再次查看就有了

bnx2 171400 0

二，tar包安装方法

1,[root@lab ~]# tar zxvf netxtreme2-4.8.10.tar.gz 解压tar.gz包

netxtreme2-4.8.10/

netxtreme2-4.8.10/bnx2

netxtreme2-4.8.10/bnx2-1.8.5b/

。。。。。。。。。。。。。。

2,[root@lab ~]# cd netxtreme2-4.8.10

[root@lab netxtreme2-4.8.10]# ls

bnx2 bnx2-1.8.5b bnx2x bnx2x-1.48.53 INSTALL.TXT Makefile

此时在这个地方就可以编译了，编译并安装之后会生成三个模块：bnx2.ko,bnx2x.ko,cnic.ko

[root@lab netxtreme2-4.8.10]# make&&make install

3,如果只需要生成bnx2.ko(cnic.ko是附带的)这个模块，可以进入当前目录下边的子目录bnx2/src,然后执行make&&make install

[root@lab src]# pwd

/root/netxtreme2-4.8.10/bnx2/src

[root@lab src]# make;make install 编译并安装

。。。。。。。。。。。。。。。

mkdir -p //lib/modules/2.6.18-53.el5/updates;

install -m 444 bnx2.ko cnic.ko //lib/modules/2.6.18-53.el5/updates;

install -m 444 bnx2.4.gz /usr/share/man/man4;

mkdir -p /usr/src/bnx2;

install -m 644 cnic_if.h cnic_drv.h bnx2.h /usr/src/bnx2;

*******************************分割线******************************

[root@localhost ~]# ethtool -i eth0

driver: tg3

version: 3.116j

firmware-version: sb

bus-info: 0000:07:00.0

[root@localhost ~]# lsmod |grep tg3

tg3 168724 0

[root@localhost log]# modinfo tg3

filename: /lib/modules/2.6.18-164.el5/updates/tg3.ko

firmware: tigon/tg3_tso5.bin

firmware: tigon/tg3_tso.bin

firmware: tigon/tg3.bin

version: 3.116j

[root@localhost ~]#lspci

00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)

00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)

00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4

00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5

00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6

00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2

00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller

00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1

00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2

00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 3

00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 4

00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5

00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6

00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1

00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2

00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3

00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)

00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller

00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller

00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller

00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller

01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0de1 (rev a1)

01:00.1 Audio device: nVidia Corporation Unknown device 0bea (rev a1)

02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface (rev b2)

07:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57788 Gigabit Ethernet PCIe (rev 01)

源码包升级驱动

tg3-3.122n.tar.gz

make && make install

cd /lib/modules/2.6.18-164.el5/updates

rmmod tg3

insmod tg3

modprobe tg3

[root@localhost ~]# modinfo tg3

filename: /lib/modules/2.6.18-164.el5/updates/tg3.ko

firmware: tigon/tg3_tso5.bin

firmware: tigon/tg3_tso.bin

firmware: tigon/tg3.bin

version: 3.122n

license: GPL

description: Broadcom Tigon3 ethernet driver

本文出自 “Mr_Z” 博客，请务必保留此出处http://zhangrong.blog.51cto.com/2196532/752876