sql存储过程分页
来源：互联网 发布：悬臂式货架 网络报价 编辑：程序博客网 时间：2024/05/22 11:34
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GOALTER PROC P_viewPage /**//* nzperfect [no_mIss] 高效通用分页存储过程(双向检索) 2007.5.7
敬告：适用于单一主键或存在唯一值列的表或视图 ps:Sql语句为8000字节,调用时请注意传入参数及sql总长度不要超过指定范围 */ @TableName VARCHAR(200), --表名 @FieldList VARCHAR(2000), --显示列名，如果是全部字段则为* @PrimaryKey VARCHAR(100), --单一主键或唯一值键 @Where VARCHAR(2000), --查询条件 不含'where'字符，如id>10 and len(userid)>9 @Order VARCHAR(1000), --排序 不含'order by'字符，如id asc,userid desc，必须指定asc或desc --注意当@SortType=3时生效，记住一定要在最后加上主键，否则会让你比较郁闷 @SortType INT, --排序规则 1:正序asc 2:倒序desc 3:多列排序方法 @RecorderCount INT, --记录总数 0:会返回总记录 @PageSize INT, --每页输出的记录数 @PageIndex INT, --当前页数 @TotalCount INT OUTPUT, --记返回总记录 @TotalPageCount INT OUTPUT --返回总页数 AS SET NOCOUNT ON IF ISNULL(@TotalCount,'') = '' SET @TotalCount = 0 SET @Order = RTRIM(LTRIM(@Order)) SET @PrimaryKey = RTRIM(LTRIM(@PrimaryKey)) SET @FieldList = REPLACE(RTRIM(LTRIM(@FieldList)),' ','') WHILE CHARINDEX(', ',@Order) > 0 OR CHARINDEX(' ,',@Order) > 0 BEGIN SET @Order = REPLACE(@Order,', ',',') SET @Order = REPLACE(@Order,' ,',',') END IF ISNULL(@TableName,'') = '' OR ISNULL(@FieldList,'') = '' OR ISNULL(@PrimaryKey,'') = '' OR @SortType < 1 OR @SortType >3 OR @RecorderCount < 0 OR @PageSize < 0 OR @PageIndex < 0 BEGIN PRINT('ERR_00') RETURN END IF @SortType = 3 BEGIN IF (UPPER(RIGHT(@Order,4))!=' ASC' AND UPPER(RIGHT(@Order,5))!=' DESC') BEGIN PRINT('ERR_02') RETURN END END DECLARE @new_where1 VARCHAR(1000) DECLARE @new_where2 VARCHAR(1000) DECLARE @new_order1 VARCHAR(1000) DECLARE @new_order2 VARCHAR(1000) DECLARE @new_order3 VARCHAR(1000) DECLARE @Sql VARCHAR(8000) DECLARE @SqlCount NVARCHAR(4000) IF ISNULL(@where,'') = '' BEGIN SET @new_where1 = ' ' SET @new_where2 = ' WHERE ' END ELSE BEGIN SET @new_where1 = ' WHERE ' + @where SET @new_where2 = ' WHERE ' + @where + ' AND ' END IF ISNULL(@order,'') = '' OR @SortType = 1 OR @SortType = 2 BEGIN IF @SortType = 1 BEGIN SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' ASC' SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' DESC' END IF @SortType = 2 BEGIN SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' DESC' SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' ASC' END END ELSE BEGIN SET @new_order1 = ' ORDER BY ' + @Order END IF @SortType = 3 AND CHARINDEX(','+@PrimaryKey+' ',','+@Order)>0 BEGIN SET @new_order1 = ' ORDER BY ' + @Order SET @new_order2 = @Order + ',' SET @new_order2 = REPLACE(REPLACE(@new_order2,'ASC,','{ASC},'),'DESC,','{DESC},') SET @new_order2 = REPLACE(REPLACE(@new_order2,'{ASC},','DESC,'),'{DESC},','ASC,') SET @new_order2 = ' ORDER BY ' + SUBSTRING(@new_order2,1,LEN(@new_order2)-1) IF @FieldList <> '*' BEGIN SET @new_order3 = REPLACE(REPLACE(@Order + ',','ASC,',','),'DESC,',',') SET @FieldList = ',' + @FieldList WHILE CHARINDEX(',',@new_order3)>0 BEGIN IF CHARINDEX(SUBSTRING(','+@new_order3,1,CHARINDEX(',',@new_order3)),','+@FieldList+',')>0 BEGIN SET @FieldList = @FieldList + ',' + SUBSTRING(@new_order3,1,CHARINDEX(',',@new_order3)) END SET @new_order3 = SUBSTRING(@new_order3,CHARINDEX(',',@new_order3)+1,LEN(@new_order3)) END SET @FieldList = SUBSTRING(@FieldList,2,LEN(@FieldList)) END END SET @SqlCount = 'SELECT @TotalCount=COUNT(*),@TotalPageCount=CEILING((COUNT(*)+0.0)/' + CAST(@PageSize AS VARCHAR)+') FROM ' + @TableName + @new_where1 IF @RecorderCount = 0 BEGIN EXEC SP_EXECUTESQL @SqlCount,N'@TotalCount INT OUTPUT,@TotalPageCount INT OUTPUT', @TotalCount OUTPUT,@TotalPageCount OUTPUT END ELSE BEGIN SELECT @TotalCount = @RecorderCount END IF @PageIndex > CEILING((@TotalCount+0.0)/@PageSize) BEGIN SET @PageIndex = CEILING((@TotalCount+0.0)/@PageSize) END IF @PageIndex = 1 OR @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize) BEGIN IF @PageIndex = 1 --返回第一页数据 BEGIN SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ' + @TableName + @new_where1 + @new_order1 END IF @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize) --返回最后一页数据 BEGIN SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM (' + 'SELECT TOP ' + STR(ABS(@PageSize*@PageIndex-@TotalCount-@PageSize)) + ' ' + @FieldList + ' FROM ' + @TableName + @new_where1 + @new_order2 + ' ) AS TMP ' + @new_order1 END END ELSE BEGIN IF @SortType = 1 --仅主键正序排序 BEGIN IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索 BEGIN SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ' + @TableName + @new_where2 + @PrimaryKey + ' > ' + '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP ' + STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey + ' FROM ' + @TableName + @new_where1 + @new_order1 +' ) AS TMP) '+ @new_order1 END ELSE --反向检索 BEGIN SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM (' + 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ' + @TableName + @new_where2 + @PrimaryKey + ' < ' + '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP ' + STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey + ' FROM ' + @TableName + @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2 + ' ) AS TMP ' + @new_order1 END END IF @SortType = 2 --仅主键反序排序 BEGIN IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索 BEGIN SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ' + @TableName + @new_where2 + @PrimaryKey + ' < ' + '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP ' + STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey +' FROM '+ @TableName + @new_where1 + @new_order1 + ') AS TMP) '+ @new_order1 END ELSE --反向检索 BEGIN SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM (' + 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ' + @TableName + @new_where2 + @PrimaryKey + ' > ' + '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP ' + STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey + ' FROM ' + @TableName + @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2 + ' ) AS TMP ' + @new_order1 END END IF @SortType = 3 --多列排序，必须包含主键，且放置最后，否则不处理 BEGIN IF CHARINDEX(',' + @PrimaryKey + ' ',',' + @Order) = 0 BEGIN PRINT('ERR_02') RETURN END IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索 BEGIN SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( ' + 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( ' + ' SELECT TOP ' + STR(@PageSize*@PageIndex) + ' ' + @FieldList + ' FROM ' + @TableName + @new_where1 + @new_order1 + ' ) AS TMP ' + @new_order2 + ' ) AS TMP ' + @new_order1 END ELSE --反向检索 BEGIN SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( ' + 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( ' + ' SELECT TOP ' + STR(@TotalCount-@PageSize*@PageIndex+@PageSize) + ' ' + @FieldList + ' FROM ' + @TableName + @new_where1 + @new_order2 + ' ) AS TMP ' + @new_order1 + ' ) AS TMP ' + @new_order1 END END END PRINT(@Sql) EXEC(@Sql) GOSET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
- sql 存储过程分页
- sql 存储过程分页
- sql分页存储过程
- sql分页存储过程
- sql 存储过程分页
- sql 存储过程分页
- SQL 存储过程---分页
- 分页存储过程--sql
- sql存储过程 分页
- sql 存储过程分页
- SQL 分页存储过程
- SQL分页存储过程
- sql分页存储过程
- SQL分页存储过程
- sql分页存储过程
- SQL ----存储过程分页
- SQL分页存储过程
- SQL----分页存储过程
- TLS---线程局部存储
- Eclipse rcp/rap 开发经验总结(6) - 如何发布rap到tomcat
- (14)第一个只出现一次的字符
- html文档相对路径分析
- SSH与SSL
- sql存储过程分页
- 双系统 如何在安装linux后将开机默认启动还原为windows
- JAVA 静态代码分析--圈复杂度检查-javancss
- Extjs4中的form使用一
- Android4.4-KitKat源码下载
- Timer定时器使用
- 七redis学习笔记之持久化
- linux 动态链接的创建和使用
- 垃圾回收
