11G新的日志信息体系导致ALERT日志报出TNS信息
来源:互联网 发布:网络贷款不还的案例 编辑:程序博客网 时间:2024/06/05 10:00
11G新的日志信息体系导致ALERT日志报出TNS信息
现象:alert日志报出很多的tns信息:
The alert log raise error:
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.21.24.6)(PORT=39039))
Tue Apr 16 08:33:56 2013
***********************************************************************
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.6.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.6.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.6.0 - Production
Time: 16-APR-2013 08:33:56
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.21.24.6)(PORT=39041))
Tue Apr 16 08:33:56 2013
***********************************************************************
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.6.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.6.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.6.0 - Production
Time: 16-APR-2013 08:33:56
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.21.24.6)(PORT=39043))
分析:
From document:
These time out related messages are mostly informational in nature. The messages indicate the specified client connection (identified by the 'Client address:' details) has experienced a time out.
If you want to find out which connection has experienced a time out, you need to check the listener.log.
You may choose to revert from the new Automatic Diagnostic Repository (ADR) method to prevent the Oracle Net diagnostic details from being written to the alert log(s) by setting the following Oracle Net configuration parameters:
To revert to Oracle Net Server tracing/logging, set following parameter in the server's sqlnet.ora :
DIAG_ADR_ENABLED = OFF
Also, to back out the ADR diag for the Listener component, set following parameter in the server's listener.ora:
DIAG_ADR_ENABLED_<listenername> = OFF
- Where the <listenername> would be replaced with the actual name of the configured listener(s) in the listener.ora configuration file. For example, if the listener name is 'LISTENER', the parameter would read:
DIAG_ADR_ENABLED_LISTENER = OFF
-Reload or restart the TNS Listener for the parameter change to take effect.
For detailed information, please check below note
Fatal NI Connect Error 12170, 'TNS-12535: TNS:operation timed out' Reported in 11g Alert Log [ID 1286376.1]
解决办法:
1.在sqlnet.ora中添加DIAG_ADR_ENABLED = OFF,再reload监听即可。
或者
2.在listener.ora中添加DIAG_ADR_ENABLED_<listenername> = OFF,再reload监听即可。
现象:alert日志报出很多的tns信息:
The alert log raise error:
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.21.24.6)(PORT=39039))
Tue Apr 16 08:33:56 2013
***********************************************************************
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.6.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.6.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.6.0 - Production
Time: 16-APR-2013 08:33:56
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.21.24.6)(PORT=39041))
Tue Apr 16 08:33:56 2013
***********************************************************************
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.6.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.6.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.6.0 - Production
Time: 16-APR-2013 08:33:56
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.21.24.6)(PORT=39043))
分析:
From document:
These time out related messages are mostly informational in nature. The messages indicate the specified client connection (identified by the 'Client address:' details) has experienced a time out.
If you want to find out which connection has experienced a time out, you need to check the listener.log.
You may choose to revert from the new Automatic Diagnostic Repository (ADR) method to prevent the Oracle Net diagnostic details from being written to the alert log(s) by setting the following Oracle Net configuration parameters:
To revert to Oracle Net Server tracing/logging, set following parameter in the server's sqlnet.ora :
DIAG_ADR_ENABLED = OFF
Also, to back out the ADR diag for the Listener component, set following parameter in the server's listener.ora:
DIAG_ADR_ENABLED_<listenername> = OFF
- Where the <listenername> would be replaced with the actual name of the configured listener(s) in the listener.ora configuration file. For example, if the listener name is 'LISTENER', the parameter would read:
DIAG_ADR_ENABLED_LISTENER = OFF
-Reload or restart the TNS Listener for the parameter change to take effect.
For detailed information, please check below note
Fatal NI Connect Error 12170, 'TNS-12535: TNS:operation timed out' Reported in 11g Alert Log [ID 1286376.1]
解决办法:
1.在sqlnet.ora中添加DIAG_ADR_ENABLED = OFF,再reload监听即可。
或者
2.在listener.ora中添加DIAG_ADR_ENABLED_<listenername> = OFF,再reload监听即可。
0 0
- 11G新的日志信息体系导致ALERT日志报出TNS信息
- 【11g新特性】alert 日志位置
- 11g的alert日志路径
- postgresql的日志信息
- 异常的日志信息
- oracle11.2g alert日志
- ORACLE告警日志文件( alert log file)存储信息
- Oracle Database 12.2 alert日志中多输出了一些os相关的信息.
- 转 Oracle 9i,10g,11g各自alert日志的位置
- Oracle 9i,10g,11g各自alert日志的位置
- 11gr2 alert日志中报TNS-12535 TNS-00505原因及解决方法
- Android的日志信息介绍
- 日志信息滥用的思考
- oracle&mysql的日志信息
- solrj正确的日志信息
- Oracle 11g Alert Log 日志位置及参数
- ADRCI 命令删除oracle 11g alert 日志
- ALERT日志中常见监听相关报错之三:ORA-609 TNS-12537 and TNS-12547 or TNS-12170 TNS-12535错误的排查
- CSS命名规范
- HBase 不能出现 HMaster和HQuorumPeer 原因
- SVN客户端
- linux系统调用
- web项目名修改
- 11G新的日志信息体系导致ALERT日志报出TNS信息
- c#视频基础笔记
- Fatal NI Connect Error 12170, 'TNS-12535: TNS:operation timed out' Reported in 11g Alert Log
- 编程语言的一点积累
- oracle 取字段文字拼音首字母
- linux 用户及用户组管理命令详解
- 分布式技术比较(RPC,CORBA,WebService)
- 【数据结构】双向链表
- 百度地图开发环境搭建BDHelloWorld