zabbix proxy安装和配置

1.创建目录
mkdir -p /maichuang/ServerScript


2.安装必要软件
yum install -y fping(若安装不成功) 或 wget http://pkgs.repoforge.org/fping/fping-3.1-1.el6.rf.i686.rpm
yum install -y gcc make cmake mysql-server mysql-devel php php-gd php-devel php-mysql php-bcmath php-ctytpe php-xml php-xmlreader php-xlmwriter php-session php-net-socket php-mbstring php-gettext httpd net-snmp curl curl-devel net-snmp net-snmp-devel perl-DBI libxml libxml2-devel 
在192.168.8.185上
scp /maichuang/zabbix-2.2.0.tar.gz root@IP:/root/


3.添加用户
groupadd zabbix
useradd -g zabbix  zabbix -s /sbin/nologin


4.创建数据库
service mysqld start
mysql -uroot -p
>create database zabbix default charset utf8;
> grant all on zabbix.* to zabbix@localhost identified by '123456';
>flush privileges;
>exit


5.导入数据库中的表
cd /root/zabbix-2.2.0/database/mysql
# mysql -uzabbix -p123456 zabbix < schema.sql  (proxy端只需要这一步,不需要数据)


6.编译安装(proxy)
cd /root/zabbix-2.2.0
 ./configure  --enable-agent --enable-proxy --with-mysql --enable-ipv6 --with-net-snmp --with-libcurl --with-libxml2 --prefix=/maichuang/zabbix
make && make install


7.编辑配置文件
cd /maichuang/zabbix/etc/
 
vi /maichuang/zabbix/etc/zabbix_proxy.conf
 Server=192.168.8.1 (根据实际情况改)
 Hostname=192.168.8.2-proxy (根据实际情况改)
 DBName=zabbix
 DBUser=zabbix
 DBPassword=123456 (根据实际情况改)
 ProxyLocalBuffer=24
 ProxyOfflineBuffer=24
 ConfigFrequency=300
 DataSenderFrequency=3
 StartPollers=20
 StartIPMIPollers=2
 StartPollersUnreachable=2
 StartTrappers=10
 StartPingers=15
 StartHTTPPollers=3
 StartVMwareCollectors=3
 VMwareCacheSize=40M
 StartSNMPTrapper=1
 CacheSize=100M
 StartDBSyncers=6
 HistoryCacheSize=100M
 HistoryTextCacheSize=200M
 Timeout=30
 LogSlowQueries=3000
 AllowRoot=1
 
 vi /maichuang/zabbix/etc/zabbix_agentd.conf
修改如下内容：
Server=192.168.8.1
ServerActive=192.168.8.1
Hostname=192.168.8.2-proxy
RefreshActiveChecks=60   
MaxLinesPerSecond=800
Timeout=30
AllowRoot=1
UnsafeUserParameters=1
UserParameter=system.agent.checkSecure,/maichuang/ServerScript/check_secure.sh


8.添加到services
# vi /etc/services
在文件最后面添加如下的内容：
zabbix-agent    10050/tcp                       # Zabbix Agent
zabbix-agent    10050/udp                      # Zabbix Agent
zabbix-trapper  10051/tcp                       # Zabbix Trapper
zabbix-trapper  10051/udp                      # Zabbix Trapper
 


9、启动守护进程
vi /etc/init.d/zabbix_proxy
vi /etc/init.d/zabbix_agentd
添加后面的脚本
chmod a+x /etc/init.d/zabbix_proxy
chmod a+x /etc/init.d/zabbix_agentd
service zabbix_proxy start  
service zabbix_agentd start 


10。添加开机启动
chkconfig zabbix_proxy on
chkconfig zabbix_agentd on


11.允许10050和10051通过防火墙
iptables -A INPUT -p tcp  --dport 10050 -j ACCEPT
iptables -A INPUT -p tcp  --dport 10051 -j ACCEPT
或者关闭防火墙
service iptables stop
setenforce 0


11.启动服务
service zabbix_proxy start
service zabbix_agentd start


12.修改客户端配置文件
vi /maichuang/zabbix/etc/zabbix_agentd.conf
修改如下内容：
Server=xxxx    改成代理服务器的IP
ServerActive=xxxx  改成代理服务器的IP
重启客户端
service zabbix_agentd restart


脚本zabbix_proxy
#!/bin/sh
# chkconfig: 345 95 95
# desctription: Zabbix Proxy
# Zabbix
# Copyright (C) 2001-2013 Zabbix SIA
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.


# Start/Stop the Zabbix agent daemon.
# Place a startup script in /sbin/init.d, and link to it from /sbin/rc[023].d


SERVICE="Zabbix proxy"
DAEMON=/maichuang/zabbix/sbin/zabbix_proxy
PIDFILE=/tmp/zabbix_agentd.pid
BASEDIR=/maichuang/zabbix/
ZABBIX_AGENTD=$BASEDIR/sbin/zabbix_proxy
case $1 in
  'start')
    if [ -x ${DAEMON} ]
    then
      $DAEMON
      # Error checking here would be good...
      echo "${SERVICE} started."
    else
echo "Can't find file ${DAEMON}."
      echo "${SERVICE} NOT started."
    fi
  ;;
  'stop')
    if [ -s ${PIDFILE} ]
    then
      if kill `cat ${PIDFILE}` >/dev/null 2>&1
      then
        echo "${SERVICE} terminated."
        rm -f ${PIDFILE}
      fi
    fi
  ;;
  'restart')
    $0 stop
    sleep 10
    $0 start
  ;;
  *)
    echo "Usage: $0 start|stop|restart"
    ;;
esac


脚本zabbix_agentd
#!/bin/sh
#chkconfig: 345 95 95
#description:Zabbix agent
# Zabbix
# Copyright (C) 2001-2013 Zabbix SIA
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.


# Start/Stop the Zabbix agent daemon.
# Place a startup script in /sbin/init.d, and link to it from /sbin/rc[023].d


SERVICE="Zabbix agent"
DAEMON=/maichuang/zabbix/sbin/zabbix_agentd
PIDFILE=/tmp/zabbix_agentd.pid
BASEDIR=/maichuang/zabbix
ZABBIX_AGENTD=$BASEDIR/sbin/zabbix_agentd


case $1 in
  'start')
    if [ -x ${DAEMON} ]
    then
      $DAEMON
      # Error checking here would be good...
      echo "${SERVICE} started."
 else
      echo "Can't find file ${DAEMON}."
      echo "${SERVICE} NOT started."
    fi
  ;;
  'stop')
    if [ -s ${PIDFILE} ]
    then
      if kill `cat ${PIDFILE}` >/dev/null 2>&1
      then
        echo "${SERVICE} terminated."
        rm -f ${PIDFILE}
      fi
    fi
  ;;
  'restart')
    $0 stop
    sleep 10
    $0 start
  ;;
  *)
    echo "Usage: $0 start|stop|restart"
    ;;
esac