redis 安装及安装遇到的问题解决
来源:互联网 发布:厨房刀具推荐知乎 编辑:程序博客网 时间:2024/05/10 11:18
公司项目需要解决大并发问题,需采用nosql 数据库。前一个项目采用memcache做为提升系统的并发分布式缓存,memcache 采用简单 key-value 的方式,存储在内存中,当然数据过大肯定不行了,断电了内存东西也丢失了。
redis呢?redis 部分存储在磁盘上。内存中当然是存在的,不然咋混得下去呢。最主要是它支持的类型好几个呢,根据业务场景当然需要选择合适的方式不。redis(key、hash、list、set、sortedset、string)具体就不一一列举咯。
开始安装:
安装环境 centos6.5
1、获取安装文件
wget http://download.redis.io/redis-stable.tar.gz
2、解压文件
tar xzvf redis-stable.tar.gz
3、进入目录
cd redis-stable
4、编译
make
5、安装
make install
6、设置配置文件路径
mkdir -p /etc/rediscp redis.conf /etc/redis
7、修改配置文件
vi /etc/redis/redis.conf仅修改: daemonize yes
8、启动
/usr/local/bin/redis-server /etc/redis/redis.conf
9、查看启动
ps -ef | grep redis
10、使用客户端
redis-cli
>set name hello
OK
>get name
"hello"
情况顺利就这样子咯。关键是心情不好就报上好几个错,当时我就遇上了。其实我也是在google找到的答案咯。
问题就是这样的:
1、不能编译没有GCC 编译工具
安装报错:
问题1:make时可能会报如下错误
cc -c -std=c99 -pedantic -O2 -Wall -W -g -rdynamic -ggdb adlist.c
make: cc:命令未找到
make: *** [adlist.o] 错误 127
解决方法:安装gcc
命令如下:yum install gcc
2、make时可能会报如下错误:
collect2: ld returned 1 exit status
make[1]: *** [redis-server] Error 1
make[1]: Leaving directory `/usr/local/redis/src'
make: *** [all] Error 2
解决办法:
编辑src/.make-settings里的OPT,改为OPT=-O2 -march=i686
3、make时可能会报如下错误:
cc: error: ../deps/hiredis/libhiredis.a: No such file or directory
cc: error: ../deps/lua/src/liblua.a: No such file or directory
cc: error: ../deps/jemalloc/lib/libjemalloc.a: No such file or directory
make: *** [redis-server] Error 1
分别进入redis下的deps下的hiredis、lua 运行make
注意:jemalloc下可能要先运行./configure,然后make
回到src目录运行 make
结果还是报cc: error: ../deps/lua/src/liblua.a: No such file or directory
这下子我把redis的解压包 删除掉 rm -rf redis-stable
重新解压 进入redis-stable make 还真没报错了。
好了,这样子总算解决了问题,下面是官网提供的安装文档。
Redis Quick Start
This is a quick start document that targets people without prior experience with Redis. Reading this document will help you:
- Download and compile Redis to start hacking.
- Use redis-cli to access the server.
- Use Redis from your application.
- Understand how Redis persistence works.
- Install Redis more properly.
- Find out what to read next to understand more about Redis.
Installing Redis
The suggested way of installing Redis is compiling it from sources as Redis has no dependencies other than a working GCC compiler and libc. Installing it using the package manager of your Linux distribution is somewhat discouraged as usually the available version is not the latest.
You can either download the latest Redis tar ball from the redis.io web site, or you can alternatively use this special URL that always points to the latest stable Redis version, that is, http://download.redis.io/redis-stable.tar.gz.
In order to compile Redis follow this simple steps:
wget http://download.redis.io/redis-stable.tar.gztar xvzf redis-stable.tar.gzcd redis-stablemake
At this point you can try if your build works correctly typing make test, but this is an optional step. After the compilation the src directory inside the Redis distribution is populated with the different executables that are part of Redis:
- redis-server is the Redis Server itself.
- redis-cli is the command line interface utility to talk with Redis.
- redis-benchmark is used to check Redis performances.
- redis-check-aof and redis-check-dump are useful in the rare event of corrupted data files.
It is a good idea to copy both the Redis server than the command line interface in proper places using the following commands:
- sudo cp redis-server /usr/local/bin/
- sudo cp redis-cli /usr/local/bin/
In the following documentation I assume that /usr/local/bin is in your PATH environment variable so you can execute both the binaries without specifying the full path.
Starting Redis
The simplest way to start the Redis server is just executing the redis-server binary without any argument.
$ redis-server[28550] 01 Aug 19:29:28 # Warning: no config file specified, using the default config. In order to specify a config file use 'redis-server /path/to/redis.conf'[28550] 01 Aug 19:29:28 * Server started, Redis version 2.2.12[28550] 01 Aug 19:29:28 * The server is now ready to accept connections on port 6379... and so forth ...
In the above example Redis was started without any explicit configuration file, so all the parameters will use the internal default. This is perfectly fine if you are starting Redis just to play a bit with it or for development, but for production environments you should use a configuration file.
To start Redis with a configuration file just give the full path of the configuration file to use as the only Redis argument, for instance: redis-server /etc/redis.conf. You can use the redis.conf file included in the root directory of the Redis source code distribution as a template to write your configuration file.
Check if Redis is working
External programs talk to Redis using a TCP socket and a Redis specific protocol. This protocol is implemented in the Redis client libraries for the different programming languages. However to make hacking with Redis simpler Redis provides a command line utility that can be used to send commands to Redis. This program is called redis-cli.
The first thing to do in order to check if Redis is working properly is sending a PING command using redis-cli:
$ redis-cli pingPONG
Running redis-cli followed by a command name and its arguments will send this command to the Redis instance running on localhost at port 6379. You can change the host and port used by redis-cli, just try the --help option to check the usage information.
Another interesting way to run redis-cli is without arguments: the program will start into an interactive mode where you can type different commands:
$ redis-cli redis 127.0.0.1:6379> pingPONGredis 127.0.0.1:6379> set mykey somevalueOKredis 127.0.0.1:6379> get mykey"somevalue"
At this point you can talk with Redis. It is the right time to pause a bit with this tutorial and start the fifteen minutes introduction to Redis data types in order to learn a few Redis commands. Otherwise if you already know a few basic Redis commands you can keep reading.
Using Redis from your application
Of course using Redis just from the command line interface is not enough as the goal is to use it from your application. In order to do so you need to download and install a Redis client library for your programming language. You'll find afull list of clients for different languages in this page.
For instance if you happen to use the Ruby programming language our best advice is to use the Redis-rb client. You can install it using the command gem install redis (also make sure to install the SystemTimer gem as well).
These instructions are Ruby specific but actually many library clients for popular languages look quite similar: you create a Redis object and execute commands calling methods. A short interactive example using Ruby:
>> require 'rubygems'=> false>> require 'redis'=> true>> r = Redis.new=> #<Redis client v2.2.1 connected to redis://127.0.0.1:6379/0 (Redis v2.3.8)>>> r.ping=> "PONG">> r.set('foo','bar')=> "OK">> r.get('foo')=> "bar"
Redis persistence
You can learn how Redis persisence works in this page, however what is important to understand for a quick start is that by default, if you start Redis with the default configuration, Redis will spontaneously save the dataset only from time to time (for instance after at least five minutes if you have at least 100 changes in your data), so if you want your database to persist and be reloaded after a restart make sure to call the SAVE command manually every time you want to force a data set snapshot. Otherwise make sure to shutdown the database using the SHUTDOWN command:
$ redis-cli shutdown
This way Redis will make sure to save the data on disk before quitting. Reading the persistence page is strongly suggested in order to better understand how Redis persistence works.
Installing Redis more properly
Running Redis from the command line is fine just to hack a bit with it or for development. However at some point you'll have some actual application to run on a real server. For this kind of usage you have two different choices:
- Run Redis using screen.
- Install Redis in your Linux box in a proper way using an init script, so that after a restart everything will start again properly.
A proper install using an init script is strongly suggested. The following instructions can be used to perform a proper installation using the init script shipped with Redis 2.4 in a Debian or Ubuntu based distribution.
We assume you already copied redis-server and redis-cli executables under /usr/local/bin.
Create a directory where to store your Redis config files and your data:
sudo mkdir /etc/redissudo mkdir /var/redis
Copy the init script that you'll find in the Redis distribution under the utils directory into /etc/init.d. We suggest calling it with the name of the port where you are running this instance of Redis. For example:
sudo cp utils/redis_init_script /etc/init.d/redis_6379
Edit the init script.
sudo vi /etc/init.d/redis_6379
Make sure to modify REDIS_PORT accordingly to the port you are using. Both the pid file path and the configuration file name depend on the port number.
Copy the template configuration file you'll find in the root directory of the Redis distribution into /etc/redis/ using the port number as name, for instance:
sudo cp redis.conf /etc/redis/6379.conf
Create a directory inside /var/redis that will work as data and working directory for this Redis instance:
sudo mkdir /var/redis/6379
Edit the configuration file, making sure to perform the following changes:
- Set daemonize to yes (by default it is set to no).
- Set the pidfile to /var/run/redis_6379.pid (modify the port if needed).
- Change the port accordingly. In our example it is not needed as the default port is already 6379.
- Set your preferred loglevel.
- Set the logfile to /var/log/redis_6379.log
- Set the dir to /var/redis/6379 (very important step!)
Finally add the new Redis init script to all the default runlevels using the following command:
sudo update-rc.d redis_6379 defaults
You are done! Now you can try running your instance with:
/etc/init.d/redis_6379 start
Make sure that everything is working as expected:
- Try pinging your instance with redis-cli.
- Do a test save with redis-cli save and check that the dump file is correctly stored into /var/redis/6379/ (you should find a file called dump.rdb).
- Check that your Redis instance is correctly logging in the log file.
- If it's a new machine where you can try it without problems make sure that after a reboot everything is still working.
Note: in the above instructions we skipped many Redis configurations parameters that you would like to change, for instance in order to use AOF persistence instead of RDB persistence, or to setup replication, and so forth. Make sure to read the redis.conf file (that is heavily commented) and the other documentation you can find in this web site for more information.
This website is open source software developed by Citrusbyte.
The Redis logo was designed by Carlos Prioglio. See more credits.
- redis 安装及安装遇到的问题解决
- linux下redis 安装及遇到的问题解决
- cordova 安装配置 及遇到的问题解决
- hive安装配置及遇到的问题解决
- hive安装配置及遇到的问题解决
- Superset安装文档及遇到的问题解决
- centos7 安装redis及遇到的问题
- 安装redis 遇到的问题及解决
- sysbench安装及遇到问题解决
- 安装composer遇到的问题及redis扩展的安装
- ubuntu安装及期间遇到的问题解决办法
- Linux安装apache环境及遇到的问题解决
- ubuntu-pip+python27+ipython-安装-及遇到的各种问题解决
- Ubuntu安装MySQL及遇到的问题解决方案
- Windows下React Native安装教程及遇到的问题解决
- Ubuntu安装MySQL及遇到的问题解决方案 xwj
- 安卓模拟器Genymotion安装及遇到的问题解决
- WampServer安装遇到的问题解决
- 《学习OpenCV》练习3-6
- HDU2048 神、上帝以及老天爷
- Partition a set of numbers into two so that difference between their sum is minimum with equal size
- HDU2049 不容易系列之(4)——考新郎
- opencv中图像显示的问题
- redis 安装及安装遇到的问题解决
- 第三周:继承
- 一个简单的测试框架(Javascript)
- 《学习OpenCV》练习3-7
- ln命令 (软链接)
- c语言中运算符优先级
- poj-1149-PIGS --网络流
- Window XP安装oracle11gR2数据库先决条件检查的问题解决
- 访问iPod Library及MPMusicPlayerController