Tomcat线程池配置(Tomcat6)
来源:互联网 发布:虾囧完整版源码 编辑:程序博客网 时间:2024/06/11 19:17
1、线程池配置(Tomcat6下)
使用线程池,用较少的线程处理较多的访问,可以提高tomcat处理请求的能力。使用方式:
首先。打开/conf/server.xml,增加
<Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
maxThreads="500" minSpareThreads="20" maxIdleTime="60000" />
最大线程500(一般服务器足以),最小空闲线程数20,线程最大空闲时间60秒。
然后,修改<Connector ...>节点,增加executor属性,如:
<Connector executor="tomcatThreadPool"
port="80"
protocol="HTTP/1.1"
maxThreads="600"
minSpareThreads="100"
maxSpareThreads="300"
connectionTimeout="60000"
keepAliveTimeout="15000"
maxKeepAliveRequests="1"
redirectPort="443"
....../>
maxThreads:Tomcat可创建的最大的线程数,每一个线程处理一个请求;
minSpareThreads:最小备用线程数,tomcat启动时的初始化的线程数;
maxSpareThreads:最大备用线程数,一旦创建的线程超过这个值,Tomcat就会关闭不再需要的socket线程;
acceptCount:指定当所有可以使用的处理请求的线程数都被使用时,可以放到处理队列中的请求数,就是被排队的请求数,超过这个数的请求将拒绝连接。
connnectionTimeout:网络连接超时,单位:毫秒。设置为0表示永不超时,这样设置有隐患的。通常可设置为30000毫秒。
enableLookups:是否允许DNS查询
注意:可以多个connector公用1个线程池。
2、调整连接相关Connector的参数:
<Connector executor="tomcatThreadPool"
port="80" protocol="HTTP/1.1"
connectionTimeout="60000"
keepAliveTimeout="15000"
maxKeepAliveRequests="1"
redirectPort="443"
maxHttpHeaderSize="8192" URIEncoding="UTF-8" enableLookups="false" acceptCount="100" disableUploadTimeout="true"/>
参数说明:
- connectionTimeout - 网络连接超时,单位:毫秒。设置为0表示永不超时,这样设置有隐患的。通常可设置为30000毫秒。
- keepAliveTimeout - 长连接最大保持时间(毫秒)。此处为15秒。
- maxKeepAliveRequests - 最大长连接个数(1表示禁用,-1表示不限制个数,默认100个。一般设置在100~200之间) the maximum number of HTTP requests that can be held in the pipeline until the connection is closed by the server. Setting this attribute to 1 disables HTTP/1.0 keep-alive, as well as HTTP/1.1 keep-alive and pipelining. Setting this to -1 allows an unlimited number of pipelined or keep-alive HTTP requests. If not specified, this attribute is set to 100.
- maxHttpHeaderSize - http请求头信息的最大程度,超过此长度的部分不予处理。一般8K。
- URIEncoding - 指定Tomcat容器的URL编码格式。
- acceptCount - 指定当所有可以使用的处理请求的线程数都被使用时,可以放到处理队列中的请求数,超过这个数的请求将不予处理,默认为10个。defines the maximum queue length for incoming connection requests when all possible request processing threads are in use. Any requests received when the queue is full are refused. The default value is 10.
- disableUploadTimeout - 上传时是否使用超时机制
- enableLookups - 是否反查域名,取值为:true或false。为了提高处理能力,应设置为false
- bufferSize - defines the size (in bytes) of the buffer to be provided for input streams created by this connector. By default, buffers of 2048 bytes are provided.
- maxSpareThreads - 做多空闲连接数,一旦创建的线程超过这个值,Tomcat就会关闭不再需要的socket线程 the maximum number of unused request processing threads that are allowed to exist until the thread pool starts stopping the unnecessary threads. The default value is 50.
- maxThreads - 最多同时处理的连接数,Tomcat使用线程来处理接收的每个请求。这个值表示Tomcat可创建的最大的线程数。。 the maximum number of request processing threads to be created by this Connector, which therefore determines the maximum number of simultaneous requests that can be handled. If not specified, this attribute is set to 200.
- minSpareThreads - 最小空闲线程数,Tomcat初始化时创建的线程数 the number of request processing threads that are created when this Connector is first started. The connector will also make sure it has the specified number of idle processing threads available. This attribute should be set to a value smaller than that set for maxThreads. The default value is 4.
- minProcessors - 最小空闲连接线程数,用于提高系统处理性能,默认值为10。(用于Tomcat4中)
- maxProcessors - 最大连接线程数,即:并发处理的最大请求数,默认值为75。(用于Tomcat4中)
备注:
Tomcat4中可以通过修改minProcessors和maxProcessors的值来控制线程数。
在Tomcat5+主要对以下参数调整
maxThreads
Tomcat使用线程来处理接收的每个请求。这个值表示Tomcat可创建的最大的线程数。
acceptCount
指定当所有可以使用的处理请求的线程数都被使用时,可以放到处理队列中的请求数,超过这个数的请求将不予处理。
connnectionTimeout
网络连接超时,单位:毫秒。设置为0表示永不超时,这样设置有隐患的。通常可设置为30000毫秒。
minSpareThreads
Tomcat初始化时创建的线程数。
maxSpareThreads
一旦创建的线程超过这个值,Tomcat就会关闭不再需要的socket线程。
转自:http://blog.csdn.net/chinadeng/article/details/6591542
- Tomcat线程池配置(Tomcat6)
- tomcat6线程池配置
- Tomcat6线程池配置
- Tomcat线程池配置
- 配置tomcat线程池
- Tomcat6 内存和线程配置
- Tomcat6 内存和线程配置
- Tomcat6 内存和线程配置
- Tomcat6 内存和线程配置
- tomcat集群配置(windows+tomcat6+apache2.2.10)
- Tomcat6线程池(Executor Thread pool)的配置
- Tomcat6线程池(Executor Thread pool)的配置
- TOMCAT线程池的配置
- Tomcat连接线程池配置
- Tomcat连接线程池配置
- Tomcat连接线程池配置
- Tomcat6.0连接池配置(oracle)
- tomcat6数据库连接池配置
- WinAPI: 钩子回调函数之 KeyboardProc
- android如何提升性能技巧(上)
- Android中Context详解 ---- 你所不知道的Context
- 关于C++中的友元函数的总结
- 三个经典的图像二值化算法(二)
- Tomcat线程池配置(Tomcat6)
- 基于jbpm4工作流技术 运行环境搭建
- Select列表框交换数据【简单的记录下】
- 《Effective C++》读书笔记之五 Item 5. Know what functions C++ silently writes and calls.
- 小云桌面上线
- 三个经典的图像二值化算法(三)
- android如何提升性能技巧(下)
- mtk GPRS 4上行发射功率回退
- BroadcastReceiver子类--AppWidgetProvider(管理桌面控件)之二